RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Tubing - Silicone Tubing
Technical specification
• Material: Silicone (silicone rubber)
• Colour: milky-transparent
• Temperature range: -50 to +180 °C, for a short time +250 °C
• Insert: a layer of glass silk braiding
• Design: inside smooth, milky and bordered; outside silicone impregnation
Item
Inside
Ø
Outside
Ø
Max. op.
pressure 1
Min.
bending
radius
Unit
Price
​ mm mm bar mm m EURO
12449 4 8 10 30 5 87.00
12450 4 8 10 30 10 144.00
12451 5 9 10 35 5 98.00
12452 5 9 10 35 10 159.00
12453 6 10 10 40 5 105.00
12454 6 10 10 40 10 202.00
12455 8 12 10 45 5 143.00
12456 8 12 10 45 10 238.00
12457 10 14 10 50 5 172.00
12458 10 14 10 50 10 284.00
12459 13 18 10 60 5 246.00
12460 13 18 10 60 10 417.00
1
at +20 °C
THOMAFLUID ® -Silicone High-Temperature
Chemical Pressure Tubing - steel wire braiding
Product specification
• Extremely robust and flexible pressure tubing
• High flexibility also in the cold
• Suitable for permanent high temperature applications
• Good dielectric properties
• Antiadhesive surface properties
• Very good resistance to ozone, aging, and weather
• Non-toxic, pyrogen-free
Technical specification
• Material: Silicone (silicone rubber)
• Colour: inside milky-transparent, outside silver
• Shore hardness A: 60° ±5° (DIN 53505)
• Temperature range: -50 to +190 °C, for a short time +250 °C
• Bursting pressure: 45 bar at +20 °C
​• Insert: inside glass silk braiding, outside zinc-plated steel wire braiding
Item
Inside
Ø
Tubing made of Elastomers (Soft Rubber)
Outside
Ø
Max. op.
pressure 1
Min.
bending
radius
Unit
Price
​ mm mm bar mm m EURO
334049 10 16 8 50 5 208.00
334050 13 19 8 70 1 62.00
334051 13 19 8 70 3 168.00
334052 13 19 8 70 5 248.00
1
at +160 °C
THOMAFLUID ® -Silicone High-Temperature
Chemical Pressure Tubing with Fabric Insert
Product specification
• Special tubing made of silicone (Silicone) for extreme applications with
a strong braiding of highly heat-resistant glass silk, which renders the
tubing (silicone core tubing) highly stable at high pressures and protects
it optimally against kinking. The diamond pattern formed by the
braiding angle guarantees an excellent adhesion of the silicone core
tubing to the silicone jacket. Additionally, the silicone jacket protects
the braiding from damage and soiling.
• Silicone high temperature chemical tubing is extruded of an especially
high-grade silicone elastomer and vulcanized. The cured goods do not
contain any extractable constituents, they are completely tasteless
and odourless, physiologically inert and absolutely well tolerated by
the body.
Technical specification
• Silicone core tubing:
Shore hardness A: 60° ±5°
Colour: transparent (inside), red (outside)
Temperature range: Class H and above up to +180 °C
Specific weight: 1.75
Elongation at break: up to 300 % without fissures
Embrittlement temperature: -60 °C
Dielectric strength: 10 kV/1.0 mm wall thickness;
(50 Hz/+20 to +180 °C) after water bath
Volume Resistivity: 4.2 x 10 15 Ohm/cm 3 /+20 °C;
2.6 x 10 13 Ohm/cm 3 /+130 °C; 5.2 x 10 12 Ohm/cm 3 /+180 °C
Dielectric constant: 3.2/+20 °C/800 Hz; 2.9/+180 °C/800 Hz
• Tolerance: DIN ISO 3302-1
• Silicone jacket:
Colour: red
Jacket: fused with silicone core tubing
​ Insert: glass silk (up to +200 °C)
Item
Inside
Ø
Outside
Ø
Max. op.
pressure 1
Min.
bending
radius
Unit
Price
​ mm mm bar mm m EURO
334047 10 16 8 50 1 52.00
334048 10 16 8 50 3 140.00
Unit Price
Item Inside Outside Bursting
Ø
Ø pressure 1
​ mm mm bar m EURO
28515 3 8 60 5 97.00
28516 3 8 60 15 223.00
24 THOMAFLUID ® II - 2015