RCT Reichelt Chemietechnik GmbH + Co. - Complete Programme (EN)
Thomafluid ® - Complete Programme
Tubings and Pipes
Connectors
Cocks and Valves
flowmeters
Pumps
laboratory Plastics
Semi-finished Products
adhesives and lubricants
fastening Elements
Closure Elements
Gaskets
Separation Technology
drive Technology
Thomafluid ® - Complete Programme
Tubings and Pipes
Connectors
Cocks and Valves
flowmeters
Pumps
laboratory Plastics
Semi-finished Products
adhesives and lubricants
fastening Elements
Closure Elements
Gaskets
Separation Technology
drive Technology
Semi-Finished Products - Plastics Foils (0.002 - 2.0 mm) Item Thickness Dimensions Unit Price mm mm piece EURO 300160 0.1 600 x 600 1 75.00 300161 0.2 600 x 600 1 79.00 300162 0.5 600 x 600 1 106.00 300163 1 600 x 600 1 170.00 300164 1.5 600 x 600 1 219.00 300165 2 600 x 600 1 273.00 300166 2.5 600 x 600 1 294.00 300167 3 600 x 600 1 313.00 300168 0.5 1,200 x 1,200 1 298.00 300169 1 1,200 x 1,200 1 467.00 300170 1.5 1,000 x 1,000 1 701.00 300171 2 1,000 x 1,000 1 833.00 300172 2.5 1,200 x 1,200 1 1,022.00 300173 3 1,200 x 1,200 1 1,039.00 THOMAPLAST ® -PTFE Film (virgin) - self-adhesive on one side Product specification • Made of sliced PTFE and coated with silicone adhesive • Excellent electrical properties • Strongly anti-adhesive surface • Good chemical resistance • High abrasion resistance • Low friction, outstanding resistance to heat • Outstanding matching to uneven surfaces • Physical-chemical properties: Due to its physical-chemical properties outstandingly suitable for lining of containers and conveying systems in the areas of chemistry, mechanical engineering and vehicle building. Very well suited for curved surfaces occurring for instance in mould making. Due to special antiadhesive properties easy mould release with sticky materials such as PUR, epoxy, and phenolic resin. Technical specification • Material: PTFE (polytetrafluoroethylene) • Colour: grey • Adhesive: silicone (covered with corrugated yellow liner) • Adhesive layer: approx. 0.045 mm • Max. temperature: +150 °C • Elongation at break: at least 270 %, with thickness >0.25 mm up to 300 % Length Price Item Width Thickness Tensile Adhesive strength strength 1 mm mm N/cm N/cm m EURO 17844 500 0.13 53 5.6 1 79.00 17845 500 0.13 53 5.6 3 213.00 Length Price Item Width Thickness Tensile Adhesive strength strength 1 mm mm N/cm N/cm m EURO 17846 500 0.13 53 5.6 5 276.00 17847 500 0.13 53 5.6 10 442.00 17849 2 500 0.13 53 5.6 20 694.00 17860 500 0.25 96 5.9 1 125.00 17861 500 0.25 96 5.9 3 338.00 17862 500 0.25 96 5.9 5 438.00 17863 500 0.25 96 5.9 10 701.00 17865 2 500 0.25 96 5.9 20 1,102.00 17868 500 0.5 184 6.8 1 206.00 17869 500 0.5 184 6.8 3 555.00 17870 500 0.5 184 6.8 5 720.00 17871 500 0.5 184 6.8 10 1,151.00 17873 2 500 0.5 184 6.8 20 1,808.00 17876 1,000 0.13 53 5.6 1 158.00 17877 1,000 0.13 53 5.6 3 426.00 17878 1,000 0.13 53 5.6 5 552.00 17879 1,000 0.13 53 5.6 10 883.00 17881 2 1,000 0.13 53 5.6 20 1,387.00 17892 1,000 0.25 96 5.9 1 251.00 17893 1,000 0.25 96 5.9 3 676.00 17894 1,000 0.25 96 5.9 5 877.00 17895 1,000 0.25 96 5.9 10 1,402.00 17897 2 1,000 0.25 96 5.9 20 2,203.00 17900 1,000 0.5 184 6.8 1 411.00 17901 1,000 0.5 184 6.8 3 1,110.00 17902 1,000 0.5 184 6.8 5 1,439.00 17903 1,000 0.5 184 6.8 10 2,302.00 17905 2 1,000 0.5 184 6.8 20 3,616.00 1 at 90° peel resistance 2 Delivered in 2 reels of 10 meter THOMAFOIL-PVDF Film Product specification • Excellent UV resistance • Good beta and gamma radiation resistance • Good resistance to alcohols, fats and oils, halogenes, alkalis, acids; not stable to ketones, aromatic hydrocarbons Technical specification • Material: PVDF (polyvinylidene fluoride), piezoelectric • Temperature range: -40 to +160 °C, for a short time +220 °C • Density: 1.76 g/cm 3 • Dielectric strength: 150 kV/mm • Dielectric constant: 8.4 at 1 MHz • Piezocoefficients: d31 biaxial 50 pC x N -1 ; d32 uniaxial 18; biaxial 8 pC x N -1 ; 33 uniaxial 2; biaxial 8 pC x N -1 Item Thickness Weight Dimensions Unit Price mm g mm piece EURO 48978 0.009 0.01 25 x 25 1 151.00 48979 0.009 0.04 50 x 50 1 284.00 48980 0.009 0.158 100 x 100 1 435.00 48981 0.028 0.028 50 x 50 1 128.00 48982 0.028 0.11 100 x 100 1 318.00 48983 0.028 0.44 200 x 200 1 445.00 48984 0.5 8.8 100 x 100 1 113.00 48985 0.5 19.8 150 x 150 1 121.00 THOMAPLAST ® II - 2015 23
Semi-Finished Products - Plastics Foils (0.002 - 2.0 mm) Item Thickness Weight Dimensions Unit Price mm g mm piece EURO 48986 0.5 72.5 300 x 300 1 351.00 48987 0.5 220 600 x 600 1 719.00 THOMAFOIL-PVDF Film - metallized Product specification • Excellent UV resistance • Good beta and gamma radiation resistance • Good resistance to alcohols, fats and oils, halogenes, alkalis, acids; not stable to ketones, aromatic hydrocarbons Technical specification • Material: PVDF (polyvinylidene fluoride), Al-metallized on both sides, piezoelectric • Temperature range: -40 to +160 °C, for a short time +220 °C • Density: 1.76 g/cm 3 • Dielectric constant: 8.4 at 1 MHz • Piezocoefficients: d31 biaxial 50 pC x N -1 ; d32 uniaxial 18; biaxial 8 pC x N -1 ; d33 uniaxial 2; biaxial 8 pC x N -1 • Surface resistivity: 10 2 Ohm/cm 2 Glass Fabric THOMAPLAST ® -Glass Fabric Film - aluminium-coated Application area • Thermal insulating, heat shielding function Product specification • Aluminium-coated on one side • Resistant to oils, fats, solvent and organic acids Technical specification • Material: glass fibre, made of EC 9 filament yarn, textured • Temperature range: -10 to +450 °C, for a short time +550 °C • Weight: approx. 1.07 kg/m 2 Item Thickness Dimensions Unit Price mm mm piece EURO 302295 1.6 500 x 500 1 94.00 302296 1.6 1,000 x 1,000 1 200.00 Item Thickness Weight Dimensions Unit Price mm g mm piece EURO 48991 0.025 0.11 50 x 50 1 462.00 48992 0.025 0.441 100 x 100 1 784.00 48993 0.025 0.993 150 x 150 1 1,589.00 THOMAFOIL-TPX Film Product specification • Moderate UV resistance • Good resistance to alcohols, halogens, fats and oils, ketones, conc. acids, alkalis Technical specification • Material: TPX (polymethylpentene) • Density: 0.835 g/cm 3 • Temperature range: 0 to +115 °C • Water absorption: 0.1 % in 24 h THOMAPLAST ® -Glass Fabric Film - silicone-coated Application area • Insulation of solenoids • Layer insulation in motor and transformer production • Insulating foil in chemical engineering, laboratory technology, electrical engineering and machine building Product specification • High diagonal flexibility and lower elongation in machine direction, thus wide application spectrum. • Very close meshed and extremely fine yarn structure. • Coated with silicone rubber under pressure on both sides, so that the silicone permeates the meshes of the fabric thus ensuring a strong bonding. • Wide temperature spectrum in the positive and negative range • Remarkable tearing strength • Easy to cut • Very good adhesive repellent properties Item Thickness Weight Dimensions Unit Price mm g mm piece EURO 48966 0.5 9.4 150 x 150 1 100.00 48967 0.5 37.6 300 x 300 1 192.00 24 THOMAPLAST ® II - 2015
- Page 673 and 674: Separation Technology - Screen Clot
- Page 675 and 676: Separation Technology - Screen Clot
- Page 677 and 678: Separation Technology - Screen Clot
- Page 679 and 680: Separation Technology - Frits, Elue
- Page 681 and 682: Separation Technology - Frits, Elue
- Page 683 and 684: Separation Technology - Prefilters
- Page 685 and 686: Separation Technology - Prefilters
- Page 687 and 688: Separation Technology - Prefilters
- Page 689 and 690: Separation Technology - Filter Modu
- Page 691 and 692: Separation Technology - Filter Hous
- Page 693 and 694: Separation Technology - Filter Hous
- Page 695 and 696: Separation Technology - Filter Hous
- Page 697 and 698: Separation Technology - Fine Filter
- Page 699 and 700: Reichelt Chemietechnik GmbH + Co. E
- Page 701 and 702: Reichelt Chemietechnik GmbH + Co. E
- Page 703 and 704: Content: Semi-Finished Products pag
- Page 705 and 706: Semi-Finished Products - Elastomers
- Page 707 and 708: Semi-Finished Products - Elastomers
- Page 709 and 710: Semi-Finished Products - Elastomers
- Page 711 and 712: Semi-Finished Products - Elastomers
- Page 713 and 714: Semi-Finished Products - Glass Fibr
- Page 715 and 716: Semi-Finished Products - Metals Tec
- Page 717 and 718: Semi-Finished Products - Elastomers
- Page 719 and 720: Semi-Finished Products - Plastics F
- Page 721 and 722: Semi-Finished Products - Plastics F
- Page 723: Semi-Finished Products - Plastics F
- Page 727 and 728: Semi-Finished Products - Glass Fabr
- Page 729 and 730: Semi-Finished Products - Metals Ite
- Page 731 and 732: Semi-Finished Products - Metals Pro
- Page 733 and 734: Semi-Finished Products - Elastomers
- Page 735 and 736: Semi-Finished Products - Elastomers
- Page 737 and 738: Semi-Finished Products - Elastomers
- Page 739 and 740: Semi-Finished Products - Elastomers
- Page 741 and 742: Semi-Finished Products - Elastomers
- Page 743 and 744: Semi-Finished Products - Elastomers
- Page 745 and 746: Semi-Finished Products - Elastomers
- Page 747 and 748: Semi-Finished Products - Elastomers
- Page 749 and 750: Semi-Finished Products - Elastomers
- Page 751 and 752: Semi-Finished Products - Elastomers
- Page 753 and 754: Semi-Finished Products - Foam Rubbe
- Page 755 and 756: Semi-Finished Products - Foam Rubbe
- Page 757 and 758: Semi-Finished Products - Foam Rubbe
- Page 759 and 760: Semi-Finished Products - Foam Rubbe
- Page 761 and 762: Semi-Finished Products - Foam Rubbe
- Page 763 and 764: Semi-Finished Products - Plastics P
- Page 765 and 766: Semi-Finished Products - Plastics I
- Page 767 and 768: Semi-Finished Products - Plastics T
- Page 769 and 770: Semi-Finished Products - Plastics I
- Page 771 and 772: Semi-Finished Products - Plastics T
- Page 773 and 774: Semi-Finished Products - Ceramic, S
Semi-Finished Products - Plastics<br />
Foils (0.002 - 2.0 mm)<br />
Item Thickness Dimensions Unit Price<br />
mm mm piece EURO<br />
300160 0.1 600 x 600 1 75.00<br />
300161 0.2 600 x 600 1 79.00<br />
300162 0.5 600 x 600 1 106.00<br />
300163 1 600 x 600 1 170.00<br />
300164 1.5 600 x 600 1 219.00<br />
300165 2 600 x 600 1 273.00<br />
300166 2.5 600 x 600 1 294.00<br />
300167 3 600 x 600 1 313.00<br />
300168 0.5 1,200 x 1,200 1 298.00<br />
300169 1 1,200 x 1,200 1 467.00<br />
300170 1.5 1,000 x 1,000 1 701.00<br />
300171 2 1,000 x 1,000 1 833.00<br />
300172 2.5 1,200 x 1,200 1 1,022.00<br />
300173 3 1,200 x 1,200 1 1,039.00<br />
THOMAPLAST ® -PTFE Film (virgin) -<br />
self-adhesive on one side<br />
Product specification<br />
• Made of sliced PTFE and coated with silicone adhesive<br />
• Excellent electrical properties<br />
• Strongly anti-adhesive surface<br />
• Good chemical resistance<br />
• High abrasion resistance<br />
• Low friction, outstanding resistance to heat<br />
• Outstanding matching to uneven surfaces<br />
• Physical-chemical properties:<br />
Due to its physical-chemical properties outstandingly suitable for<br />
lining of containers and conveying systems in the areas of chemistry,<br />
mechanical engineering and vehicle building. Very well suited for curved<br />
surfaces occurring for instance in mould making. Due to special<br />
antiadhesive properties easy mould release with sticky materials such<br />
as PUR, epoxy, and phenolic resin.<br />
Technical specification<br />
• Material: PTFE (polytetrafluoroethylene)<br />
• <strong>Co</strong>lour: grey<br />
• Adhesive: silicone (covered with corrugated yellow liner)<br />
• Adhesive layer: approx. 0.045 mm<br />
• Max. temperature: +150 °C<br />
• Elongation at break: at least 270 %,<br />
with thickness >0.25 mm up to 300 %<br />
Length Price<br />
Item Width Thickness<br />
Tensile Adhesive<br />
strength strength 1<br />
mm mm N/cm N/cm m EURO<br />
17844 500 0.13 53 5.6 1 79.00<br />
17845 500 0.13 53 5.6 3 213.00<br />
Length Price<br />
Item Width Thickness<br />
Tensile Adhesive<br />
strength strength 1<br />
mm mm N/cm N/cm m EURO<br />
17846 500 0.13 53 5.6 5 276.00<br />
17847 500 0.13 53 5.6 10 442.00<br />
17849 2 500 0.13 53 5.6 20 694.00<br />
17860 500 0.25 96 5.9 1 125.00<br />
17861 500 0.25 96 5.9 3 338.00<br />
17862 500 0.25 96 5.9 5 438.00<br />
17863 500 0.25 96 5.9 10 701.00<br />
17865 2 500 0.25 96 5.9 20 1,102.00<br />
17868 500 0.5 184 6.8 1 206.00<br />
17869 500 0.5 184 6.8 3 555.00<br />
17870 500 0.5 184 6.8 5 720.00<br />
17871 500 0.5 184 6.8 10 1,151.00<br />
17873 2 500 0.5 184 6.8 20 1,808.00<br />
17876 1,000 0.13 53 5.6 1 158.00<br />
17877 1,000 0.13 53 5.6 3 426.00<br />
17878 1,000 0.13 53 5.6 5 552.00<br />
17879 1,000 0.13 53 5.6 10 883.00<br />
17881 2 1,000 0.13 53 5.6 20 1,387.00<br />
17892 1,000 0.25 96 5.9 1 251.00<br />
17893 1,000 0.25 96 5.9 3 676.00<br />
17894 1,000 0.25 96 5.9 5 877.00<br />
17895 1,000 0.25 96 5.9 10 1,402.00<br />
17897 2 1,000 0.25 96 5.9 20 2,203.00<br />
17900 1,000 0.5 184 6.8 1 411.00<br />
17901 1,000 0.5 184 6.8 3 1,110.00<br />
17902 1,000 0.5 184 6.8 5 1,439.00<br />
17903 1,000 0.5 184 6.8 10 2,302.00<br />
17905 2 1,000 0.5 184 6.8 20 3,616.00<br />
1<br />
at 90° peel resistance 2 Delivered in 2 reels of 10 meter<br />
THOMAFOIL-PVDF Film<br />
Product specification<br />
• Excellent UV resistance<br />
• Good beta and gamma radiation resistance<br />
• Good resistance to alcohols, fats and oils, halogenes, alkalis, acids;<br />
not stable to ketones, aromatic hydrocarbons<br />
Technical specification<br />
• Material: PVDF (polyvinylidene fluoride), piezoelectric<br />
• Temperature range: -40 to +160 °C, for a short time +220 °C<br />
• Density: 1.76 g/cm 3<br />
• Dielectric strength: 150 kV/mm<br />
• Dielectric constant: 8.4 at 1 MHz<br />
• Piezocoefficients: d31 biaxial 50 pC x N -1 ; d32 uniaxial 18;<br />
biaxial 8 pC x N -1 ; 33 uniaxial 2; biaxial 8 pC x N -1<br />
<br />
Item Thickness Weight Dimensions Unit Price<br />
mm g mm piece EURO<br />
48978 0.009 0.01 25 x 25 1 151.00<br />
48979 0.009 0.04 50 x 50 1 284.00<br />
48980 0.009 0.158 100 x 100 1 435.00<br />
48981 0.028 0.028 50 x 50 1 128.00<br />
48982 0.028 0.11 100 x 100 1 318.00<br />
48983 0.028 0.44 200 x 200 1 445.00<br />
48984 0.5 8.8 100 x 100 1 113.00<br />
48985 0.5 19.8 150 x 150 1 121.00<br />
THOMAPLAST ® II - 2015 23