Reversing FreeRTOS on embedded devices

More documents

Recommendations

Info

The entry point - Interrupt Vector Table (IVT) This table contains the addresses of the routines that will handle some of the interrupts. This table is located at offset 0x00. http://www.st.com/content/ccc/resource/technical/document/programming_manual/fc/90/ c7/17/a1/44/43/89/DM00051352.pdf/files/DM00051352.pdf/jcr:content/translations/en.DM00051352.pdf 32 RECON 2017 Brussels
The entry point – IVT raw • Contents of the 0x00 offset of a <strong>FreeRTOS</strong> image 33 RECON 2017 Brussels
Page 1 and 2: Reversing
Page 3 and 4: About us - Vladan • Senior Managi
Page 5 and 6: Why? • Recent project challenges
Page 7 and 8: …To Embedded • Usually around s
Page 9 and 10: Tools of choice • IDA Pro • Cap
Page 11 and 12: Main constraints • Limited amount
Page 13 and 14: Software Requirements • Needs to
Page 15 and 16: Supported high level functionalitie
Page 17 and 18: FreeRTOS main comp
Page 19 and 20: ̶ ̶ ̶ Security Features overview
Page 21 and 22: ̶ ̶ Sample application • Sample
Page 23 and 24: Application architecture C O R E Bu
Page 25 and 26: Run // LED connected to GPIO port P
Page 27 and 28: What is next? • Now we have creat
Page 29 and 30: Reverse engineering on embedded sys
Page 31: The entry point • STM32 has some
Page 35 and 36: The entry point - Reset Handler Now
Page 37 and 38: Reverse engineering on STM32F0 •
Page 39 and 40: IDA Plugin - Functions manipulating
Page 41 and 42: Reverse engineering on STM32F0 •
Page 43 and 44: Critical code decoding and listing
Page 45 and 46: Interesting registers 45 RECON 2017
Page 47: THANK YOU

Reversing FreeRTOS on embedded devices

Create successful ePaper yourself

Delete template?

Save as template?