Catalogue ATEX-compliant geared motors - Lenze

1
Y Cross-reference
Y Result
General
Example order
1. Specify Atex category/zone.
Y General information, explosion protection (chapter 1)
Example: Atex category 3D/zone 22
2. Dimension the drive system.
Y Drive dimensioning, dimensioning (chapter 2)
3. Specify the type designation and ratio.
Y Product key (fold-out page),
selection table (chapter 3-7)
Y Gearbox type, gearbox size, number of stages,
example:
GST 07 - 2
Drive design, (motor frame size) drive size,
ratio
Example: M, 100C12, i=44,500
4. Specify the output design.
Y Product key (fold-out page),
Drive dimensioning, gearbox designs (chapter 2)
Y Solid shaft with keyway, without foot, with centring
ring, with 200 mm round flange (V, C, K)
5. Specify the mounting position and the position of the
system blocks.
Y Product key (fold-out page)
Example: Mounting position A
Terminal box position 5
6. Specify the colour.
Y Drive dimensioning, gearbox designs (chapter 2)
Example: Paint RAL 7012 (basalt grey)
7. Specify the gearbox options.
Y Drive dimensioning, gearbox designs (chapter 2)
Example: Breather elements
1-12 G-motion atex en 06/2011