Military Occupational Classification and Structure - U.S. Army

(4) CW5 must—
(a) Meet qualifications described in paragraph f(3).
(b) Complete the Warrant Officer Senior Staff Course (WOSSC).
g. Duties.
(1) WO1/CW2 see MOS 915A.
(2) CW3 performs duties described in paragraph g(1).
(3) CW4—
(a) Performs duties described in paragraph g(2).
(b) Not used.
(4) CW5—
(a) Performs duties described in paragraph g(3).
(b) Develops technical concepts and doctrine.
(c) Is proponent level personnel systems integrator.
(d) Provides leadership guidance, technical expertise and direction
to supported elements, staff agencies and commanders at all
levels of the U.S. Army.
h. Grading and position titles. Authorized position titles are provided
in tables 6-2 and 6-3. The following grades are used to code
positions into one of four definable skill levels: W2 equals WO1/
CW2; W3 equals CW3; W4 equals CW4; and W5 equals CW5. The
grades are listed in the following standards of grade tables:
(1) Table 8-915D-1. Standards of grade TOE/MTOE.
(2) Table 8-915D-2. Standards of grade TDA.
8–96. Military Occupational Specialty 915E—Support
Maintenance Technician
a. Licensing/certification requirement. None.
b . P r e r e q u i s i t e s . D e m o n s t r a t e d p r o f i c i e n c y i n M O S 9 1 5 A o r
915D.
c. MOS 915E. MOS 915E is a nonaccession MOS. The warrant
officer feeder MOSs are 915A or 915D.
d. Associated SQI.
(1) 0—No special qualifications.
(2) 7—Parachutist.
(3) 8—Instructor.
(4) T—Transition (personnel only).
(5) Z—Research, Development, Test, and Evaluation Technician.
e. Associated ASI.
(1) 6M—Mobilization and Demobilization Operations.
(2) 6P—Master Fitness Trainer.
f. Qualifications.
(1) CW2 W01/CW2 must see MOS 915A.
(2) CW3 must—
(a) Meet qualifications described in paragraph f(1).
(b) Complete the MOS 915E Warrant Officer Advanced Course.
(3) CW4 must—
(a) Meet qualifications described in paragraph f(2).
(b) Complete the Warrant Officer Staff Course (WOSC).
(4) CW5 must—
(a) Meet qualifications described in paragraph f(3).
( b ) C o m p l e t e d t h e W a r r a n t O f f i c e r S e n i o r S t a f f C o u r s e
(WOSSC) and be certified by the proponent.
g. Duties.
(1) W01/CW2 see MOS 915A.
(2) CW3—
(a) Performs duties described in paragraph g(1).
(b) Manages Direct Support (DS) and General Support (GS) level
repair of automotive equipment.
(c) Manages work flow to subordinates.
(d) Ensures quality of work performed through inspections and
test of outgoing equipment.
(e) Establishes maintenance and repair schedules based on equipment
density, unit mission, and availability of parts, tools, and
personnel.
(f) Establishes internal administrative procedures to requisition,
r e c e i v e , i s s u e , a n d s t o r e t o o l s , p a r t s , p u b l i c a t i o n s , a n d P O L
products.
( g ) I n s t r u c t s a n d m o n i t o r s s t u d e n t s i n s e r v i c e s c h o o l
environment.
122 DA PAM 611–21 • 31 March 1999
(h) Diagnoses complex malfunctions in automotive equipment
and instructs personnel on such repair.
(i) Establishes and enforces a shop fire and safety program per
applicable regulations.
(j) Manages disposal of used POL products.
(k) Writes and updates internal maintenance shop SOPs.
(3) CW4—
(a) Performs duties described in paragraph g(2).
(b) Acts as technical advisor to Brigade/Group level commanders
and staffs.
(c) Operates within the research and development area of wheel
vehicles and light, medicum, and heavy track vehicles.
( d ) S u p e r v i s e s s u p p o r t m a i n t e n a n c e q u a l i t y a s s u r a n c e / q u a l i t y
control operations.
(4) CW5—
(a) Performs duties described in paragraph g(3).
(b) Develops technical concepts and doctrine.
( c ) P e r f o r m s d u t i e s a s p r o p o n e n t l e v e l p e r s o n n e l s y s t e m s
integrator.
(d) Provides leadership, guidance, technical expertise and direction
to supported elements, staff agencies and commanders at all
levels of the U.S. Army.
h. Grading and position titles. Authorized position titles are provided
in appendixes B and C. The following grades are used to code
positions into one of four definable skill levels: W2 equals WO1
and CW2; W3 equals CW3; W4 equals CW4; and W5 equals CW5.
The grades are listed in the following standards of grade tables:
(1) Table 8-915E-1. Standards of grade TOE/MTOE.
(2) Table 8-915E-2. Standards of TDA.
8–97. Area of Concentration 916—High-to-Medium
Altitude Air Defense (HIMAD) Systems
There is one warrant officer specialty within this AOC. The skills
and knowledge required to qualify for this specialty is necessary to
provide the technical expertise to maintain and repair the Army’s
high-to-medium air defense systems.
8–98. Military Occupational Specialty 916A—High-to-
Medium Air Defense (HIMAD) Direct Support/General
Support Maintenance Technician
a. Licensing/certiification requirement. None.
b. Prerequisites. DA Cir 601 series.
c. MOS 916A. MOS 916A is an accession MOS. The enlisted
feeder MOSs are 24H, 24K, 27H, 27J, 27K, and 27X.
d. Associated SQI.
(1) 0—No special qualifications.
(2) 7—Parachutist.
(3) 8—Instructor.
(4) T—Transition (personnel only).
(5) Z—Research, Development, Test, and Evaluation Technician.
e. Associated ASI.
(1) 6M—Mobilization and Demobilization Operations.
(2) 6D—PATRIOT Direct Support/General Support Maintenance
Technician.
(3) 6P—Master Fitness Trainer.
f. Qualifications.
(1) WO1/CW2 must—
( a ) C o m p l e t e t h e H I M A D S y s t e m s W a r r a n t O f f i c e r B a s i c
Course.
(b) Have normal vision correctable to 20/20; normal color discrimination
and hearing per AR 40-501; and full use of both hands.
(2) CW3 must—
(a) Meet the qualifications outlined in paragraph f(1).
(b) Completed the Ordnance Warrant Officer Advanced Course.
(3) CW4 must—
(a) Meet the qualifications outlined in paragraph f(2).
(b) Complete the Warrant Officer Staff Course (WOSC).
(4) CW5 must—
(a) Meet the qualifications outlined in paragraph f(3).
(b) Complete the Warrant Officer Senor Staff Course (WOSSC).
g. Duties.