05.02.2017 Views

Autodata - Diagnostic Trouble Codes Fault locations and probable causes - 2004 edition

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Engine management<br />

<strong>Trouble</strong> code identification<br />

<strong>Fault</strong> location<br />

Probable cause<br />

PI101<br />

Incorrectly programmed ECM, EEPROM error, ECM<br />

Wiring, blower motor relay 1<br />

PI109 I Engine coolant blower motor relay 2 - operation Wiring, blower motor relay 2<br />

PI110 I Air conditioning Wiring, AC temperature sensors control module,<br />

AC control module, multifunction control module, ECM<br />

PI112<br />

PI1 35<br />

PI 138<br />

PI169<br />

I<br />

Fuel pressure - control<br />

I 3rd piston cut-off solenoid<br />

Fuel pressure control sdenoid<br />

Engine control module (ECM) - injector control -<br />

capacitor 1<br />

Engine control module (ECM) - injector control -<br />

capacitor 2<br />

Engine control module (ECM) - extended engine<br />

Wiring, fuel system pressure sensor, fuel pressure<br />

control solenoid, fuel system, ECM<br />

Wiring, 3rd piston cut-off solenoid, ECM<br />

- --<br />

Wiring, fuel pressure control solenoid, ECM<br />

Wiring, ECM<br />

Wiring, ECM<br />

Wiring, relay module, ECM<br />

PI402 I Exhaust gas recirculation (EGR) solenoid Wiring, EGR solenoid, ECM<br />

PI403<br />

PI404<br />

Engine coolant heater<br />

Engine control module (ECM) - glow plug control<br />

modulelengine coolant heater relay - control<br />

Wiring, engine coolant heater relay, ECM<br />

Wiring, glow plug control module, engine coolant heater<br />

relay, ECM<br />

PI408 Engine coolant heater - control Wiring, incorrectly programmed ECM, battery,<br />

EEPROM error<br />

-- - --<br />

PI511 1 Engine control module (ECM) - sup5<br />

~.<br />

voltage Wiring, battery, ignition switch, ECM<br />

~<br />

PI517 Alarm systemlcentral locking control module - Wiring, incorrectly programmed<br />

programming<br />

PI519<br />

PI 521<br />

PI606<br />

Engine control module (ECM) - engine coolant<br />

blower motor control<br />

Clutch pedal position (CPP) switch<br />

Malfunction indicator lamp (MIL)<br />

Engine control module (ECM) - sensor<br />

reference voltage incorrect<br />

Wiring, engine coolant blower motor relay, ECM<br />

Wiring, CPP switch, VSS, ECM<br />

Wiring, MIL, ECM<br />

Wiring, ECM<br />

~1614<br />

-<br />

Engine control module (ECM):<br />

I reference voltage incorrect .<br />

CMP sensor Wiring, ECM<br />

/<strong>Autodata</strong> I Engme<br />

management 499

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!