10.12.2012 Views

Chapter 8. Replacing FRUs - CNET Content Solutions

Chapter 8. Replacing FRUs - CNET Content Solutions

Chapter 8. Replacing FRUs - CNET Content Solutions

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

58 Hardware Maintenance Manual<br />

Diagnostic Error Code FRU/Action<br />

001-024-XXX<br />

System Addressing test failure<br />

System board<br />

001-025-XXX<br />

System Checksum Value error<br />

001-026-XXX<br />

System FLASH data error<br />

001-027-XXX<br />

System Configuration/Setup error<br />

001-032-XXX<br />

System Device Controller failure<br />

001-034-XXX<br />

System Device Buffer Allocation failure<br />

001-035-XXX<br />

System Device Reset condition detected<br />

001-036-XXX<br />

System Register error<br />

001-038-XXX<br />

System Extension failure<br />

001-039-XXX<br />

System DMI data structure error<br />

001-040-XXX<br />

System IRQ failure<br />

001-041-XXX<br />

System DMA failure<br />

001-195-XXX<br />

System Test aborted by user<br />

001-196-XXX<br />

System test halt, error threshold exceeded<br />

1. Flash the system. See “Updating<br />

(flashing) BIOS from a CD-ROM or<br />

diskette” on page 786<br />

2. System board<br />

1. Flash the system. See “Updating<br />

(flashing) BIOS from a CD-ROM or<br />

diskette” on page 786<br />

2. System board<br />

1. Run Setup<br />

2. Flash the system. See “Updating<br />

(flashing) BIOS from a CD-ROM or<br />

diskette” on page 786<br />

3. System board<br />

System board<br />

1. Reboot the system<br />

2. Flash the system. See “Updating<br />

(flashing) BIOS from a CD-ROM or<br />

diskette” on page 786<br />

3. Run memory test<br />

4. System board<br />

System board<br />

System board<br />

1. Adapter card<br />

2. System board<br />

1. Flash the system. See “Updating<br />

(flashing) BIOS from a CD-ROM or<br />

diskette” on page 786<br />

2. System board<br />

1. Power-off/on system and re-test<br />

2. System board<br />

1. Power-off/on system and re-test<br />

2. System board<br />

Information only<br />

Re-start the test, if necessary<br />

1. Press F3 to review the log file<br />

2. Re-start the test to reset the log file

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!