Easy_Smart_Configuration_Utility_UG_1478226831098y
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Easy</strong> <strong>Smart</strong> <strong>Configuration</strong> <strong>Utility</strong> User Guide<br />
Figure 6-6 802.1Q VLAN PVID Setting<br />
The following entries are displayed on this screen:<br />
‣ 802.1Q VLAN PVID Setting<br />
Select:<br />
Port:<br />
PVID:<br />
LAG:<br />
Select the desired port for configuration. It is multi-optional.<br />
Displays the port number.<br />
Enter a PVID number for the port. When adding the tag header<br />
to the received untagged packet, the switch will automatically<br />
uses this PVID value as the VLAN ID of the added tag.<br />
Displays the LAG to which the port belongs.<br />
Note:<br />
1. 802.1Q VLAN should be enabled before setting PVID.<br />
2. You can go to Switching→LAG page to configure the LAG status of the port.<br />
Return to CONTENTS<br />
34