Easy_Smart_Configuration_Utility_UG_1478226831098y

Recommendations

Info

Easy Smart Configuration Utility User Guide 4. Click Finish to complete. Figure 2-16 Uninstall Complete Return to CONTENTS 13
Easy Smart Configuration Utility User Guide Chapter 3 System The System module is mainly for system configuration of the switch, including seven submenus: System Info, IP Setting, User Account, Backup and Restore, System Reboot, System Reset and Firmware Upgrade. 3.1 System Info On this page you can view the system information and define the device description. Choose the menu System→System Info to load the following page. ‣ System Info Figure 3-1 System Information Device Description: MAC Address: IP Address: Subnet Mask: Default Gateway: Firmware Version: Hardware Version: Displays the device model number. Displays the MAC address of the switch. Displays the system IP address of the switch. The default system IP is 192.168.0.1 and you can change it appropriate to your needs. Displays the subnet mask of the switch. Displays the default gateway of the switch. Displays the installed software version number. Displays the installed device hardware version number. 14
Page 1 and 2: User Guide Easy Smart Configuration
Page 3 and 4: Easy Smart Configuration Utility Us
Page 15: Easy Smart Configuration Utility Us
Page 19 and 20: Choose the menu System→User Accou
Page 45: Easy Smart Configuration Utility Us

Easy_Smart_Configuration_Utility_UG_1478226831098y

Create successful ePaper yourself

Delete template?

Save as template?