Easy_Smart_Configuration_Utility_UG_1478226831098y
Easy Smart Configuration Utility User Guide The setting figure will be shown as below: Figure 2-9 Switch Setting You can configure the switch’s Device Description, DHCP Setting, IP Address, Subnet Mask and Default Gateway on this page. The login User Name and Password are required to complete the configuration. By default, they are both admin. When the switch IP Address is not in the same subnet with host IP Address, it can be discovered by the utility, but you cannot login the utility management page. Therefore, it needs to set the switch IP Address in the same subnet with host IP Address, which allows you to login the utility management page and configure the switch. Clicking Apply can only make the new configurations effective before the switch is rebooted. If you want to keep the configurations effective even the switch is rebooted, please select the checkbox behind Save Config. 2.5 Refresh Click Refresh in Figure 2-7 to restart the switch discovering process. 9
Easy Smart Configuration Utility User Guide 2.6 Utility Features Overview You can select a switch and click or double click its corresponding entry to log on to the switch for further configuration. Please ensure that host IP address and switch IP address must be in the same subnet. Figure 2-10 Discovered Switch Enter the User Name and Password to login the configuration interface. They are both admin by default. You can select Remember Me to remember the User Name and Password. Figure 2-11 Login 10
- Page 1 and 2: User Guide Easy Smart Configuration
- Page 3 and 4: Easy Smart Configuration Utility Us
- Page 5 and 6: Easy Smart Configuration Utility Us
- Page 7 and 8: Easy Smart Configuration Utility Us
- Page 9 and 10: Easy Smart Configuration Utility Us
- Page 11: Easy Smart Configuration Utility Us
- Page 15 and 16: Easy Smart Configuration Utility Us
- Page 17 and 18: Easy Smart Configuration Utility Us
- Page 19 and 20: Choose the menu System→User Accou
- Page 21 and 22: Easy Smart Configuration Utility Us
- Page 23 and 24: Easy Smart Configuration Utility Us
- Page 25 and 26: Easy Smart Configuration Utility Us
- Page 27 and 28: Easy Smart Configuration Utility Us
- Page 29 and 30: Easy Smart Configuration Utility Us
- Page 31 and 32: Easy Smart Configuration Utility Us
- Page 33 and 34: Easy Smart Configuration Utility Us
- Page 35 and 36: Easy Smart Configuration Utility Us
- Page 37 and 38: Easy Smart Configuration Utility Us
- Page 39 and 40: Easy Smart Configuration Utility Us
- Page 41 and 42: Easy Smart Configuration Utility Us
- Page 43 and 44: Easy Smart Configuration Utility Us
- Page 45: Easy Smart Configuration Utility Us
<strong>Easy</strong> <strong>Smart</strong> <strong>Configuration</strong> <strong>Utility</strong> User Guide<br />
The setting figure will be shown as below:<br />
Figure 2-9 Switch Setting<br />
You can configure the switch’s Device Description, DHCP Setting, IP Address, Subnet Mask<br />
and Default Gateway on this page. The login User Name and Password are required to<br />
complete the configuration. By default, they are both admin.<br />
When the switch IP Address is not in the same subnet with host IP Address, it can be<br />
discovered by the utility, but you cannot login the utility management page. Therefore, it needs<br />
to set the switch IP Address in the same subnet with host IP Address, which allows you to login<br />
the utility management page and configure the switch.<br />
Clicking Apply can only make the new configurations effective before the switch is rebooted. If<br />
you want to keep the configurations effective even the switch is rebooted, please select the<br />
checkbox behind Save Config.<br />
2.5 Refresh<br />
Click Refresh in Figure 2-7 to restart the switch discovering process.<br />
9