Shielding paints - YSHIELD Europe

Updated: December 2012 50-60 dB, GSM1800 vs. DECT eff. 20-30 dB.
Page 72
EMR - PROTECTION
Power supply: 9 V NiMH battery, average time of operation: 8 hours, Low-Batt. indication, auto-power-off-function, mains adaptor, battery charger
EMR-Meters / High-frequency 7/8
Service-specific frequency filter FF6E
Recommended for: HF E 35C, HF E 59B
The service specific filters always only show the preset radio service, and
suppress all other frequencies.
Evaluates each radio service separately
Additional features as compared to the FF6:
The 50-60 dB suppression of unwanted frequencies is unequalled in this
product segment. It allows for a precise analysis of the selected frequency
ranges.
With its additional filters for TETRA-BOS, DVB-T, as well as high and low
pass combinations applied at 1100 MHz this filter is especially suited for
our E-type measuring devices (as from 27 MHz).
To be connected between the antenna cable and the antenna input socket
of the measuring device (by the operator).
Cascadable with all amplifiers and attenuators.
Also allows for a broadband measurement without additional transmission
loss, which means the filter can remain attached to the device.
Perfectly shielded against interferences.
Possible exposures to sheath currents on the cable behind the filter can be
additionally suppressed with the help of a free of charge modification of
your HF-device.
Scope of delivery: filter, Rg58 coaxial cable, tightening aid, manual, charger.
Technical data:
Frequency Range: ALL / GSM9 / GSM18 / DECT / UMTS / WLAN / HP11/ TP11 /TETRA / DVB-T
Accuracy: Typical suppression of unwanted frequencies: > 50-60 dB, GSM1800 vs. DECT eff. 20-30 dB.
Power supply: 9 V NiMH battery, average time of operation: 8 hours, Low-Batt. indication, auto-power-off-function, mains adaptor, battery charger
- 16 -