Spaenaur

.093" 2,36 mm Connector Housings
Logements des raccords
NYLON
Rated
94V-2
1
cir.
3191 Series
2
cir.
3
circuits
4
cir.
Current Rating: 250 V.A.C. or 600 V.A.C.
6
cir.
Inch
Pouces
9
cir.
Connector Circuit Grid Patterns
.264" (6,71 mm) grid spacing
Unit Package 10 12
cir.
See Page G71 for
Dimensional Information 3191.
15
cir.
G
Receptacle Plug Electrical Receptacle Plug Electrical
Available only
Available only
without with without Max. Max. without with without Max. Max.
Circuits Mounting Ears Mounting Ears Mounting Ears Amps. Volts Circuits Mounting Ears Mounting Ears Mounting Ears Amps. Volts
SPAENAUR No.
SPAENAUR No.
1 700-003 700-002 12 600 6 700-011 700-010 9 600
2 700-005 700-004 12 600 9 700-013 700-012 8 600
3 700-007 700-006 11 600 12 700-015 700-014 7 600
4 700-009 700-008 9 600 15 700-017 700-016 6 600
.093" (2,36 mm) Diameter
Terminals
.093" (2,36 mm) Diameter,
Terminal Information
SPAENAUR No's. (six-digit)
.010" Brass, Crimp Type
Tin Plated
Wire Insulation Wire Insulation
Size Diameter Model No. Size Diameter Model No.
14-20
.065/.160 1189 - Female
22-24 (a)
.050/.070 2871 - Female
(1,65/4,06) 1190 - Male (1,27/1,78) 2870 - Male
18-22
.060/.120 1381 - Female .030/.060 1433 - Female
24-30
(1,52/3,05) 1380 - Male (0,76/1,52) 1434 - Male
(a) For fire retardant insulated wire.
Female Terminals
Finish Form Dimple 1189-F 1381-F 2871-F 1433-F
Tin Loose Yes 700-503 700-505
Specifications - Electrical:
Resistance - MV voltage drop per
amp, ±10%: ● 1st engagement 3.0 ●
10th engagement 3.1 Probe about 1"
(2,54 cm) from crimp barrel on 18
AWG stranded wire. Voltage drop
includes mated terminals and both
crimps. Brass material and tin plating.
High Voltage Test - Withstands 1500
volts RMS applied between adjacent
terminals for 60 seconds mounted in
all housings.
Temperature Rise/Operating Range -
30° maximum for all connectors at
maximum rated current.
Temperature range - 40°C to 105°C
Current Rating - Amperage rating up
to 12 amps on some sizes.
G70
26 Mar 04
Mfr. #HT - 2038
876-483 Extractor Tool
(for removing .093" Terminals)
Hand-Crimp
Tool
Mfr. #63811-1000
Please order by SPAENAUR No's.
Mechanical:
Terminal Crimp Strength -
Minimum pull-out force in
pounds (kilograms) for
AWG wire sizes:
14-35 (15,9) 24-8 (3,63)
16-30 (13,6) 26-5 (2,27)
18-20 (9,07) 28-3 (1,36)
20-15 (6,80) 30-2 (0,91)
22-10 (4,54)
Male Terminals
Finish Form 1190-M 1380-M 2870-M 1434-M
Tin Loose 700-502 700-504
C - Insulation Crimp Area
Engage/Disengage Forces -
Standard terminal of .010" (0,25
mm) stock 70/30 brass. Average
engage/disengage forces in plug/
receptacle connector with +30%
tolerance in pounds (kilograms) by
circuit:
1-circuit 3.5/2.75 (1,59/1,25)
2 -circuit 7.0/5.5 (3,18/2,50)
3-circuit 9.5/8.26 (4,77/3,75)
4-circuit 14.0/11.02 (6,36/5,00)
5-circuit 17.5/13.7 (7,95/6,24)
6-circuit 21.0/16.5 (9,53/7,50)
9-circuit 31.5/24.8 (14,30/11,24)
12-circuit 42.0/33.07 (19,06/15,00)
15-circuit 52.5/41.3 (23,84/18,73)
876-482
For installing .093 terminals
Unit Pkg. 200
Hand-Crimp Tool
B - Conductor Crimp area
Hand Tools
Priced Singly
CATALOG 13