Spaenaur

CATALOG 13
Inch
Pouces
PLIERS
for INTERNAL-
TYPE RINGS
REGULAR SIZE - FOR MOST POPULAR RING SIZES
T-445 . . Internal Snap Ring Pliers T-446 . . External Snap Ring Pliers
For INTERNAL
Rings
up to approx.
2" housing
diameter
Pliers 6-5/8" long.
Complete with one T-447 Point Assortment,
5 pairs. Packed Singly
These tools are designed to supplement
the T-445 and T-446. By
LARGE SIZE - FOR MORE RANGE
using the different types and sizes of interchangeable points, the mechanic now has a wider
range of applications, both automotive and industrial. Pliers each 9-3/8" long with firm-grip
handles, automatic ratchet-locking device built into handle.
T-455 . . Internal Snap Ring Pliers T-456 . . External Snap Ring Pliers
Pliers 9-3/8" long.
For INTERNAL Rings 2-7/16" to 3" housing
diameter. Complete with one T-457 Point
Assortment, 3 pairs. Packed Singly.
INTERCHANGEABLE POINTS ASSORTMENTS
T-447 - for use in pliers T-445 T-457 - for use in Pliers T-455
and T-446 and T-456
P.C. 876
5 pairs points in plastic box.
One pair each of the following:
Point dia. - .039", angle 15°
Point dia. - .047", angle 15°
Point dia. - .074", angle 15°
Point dia. - .039", angle 45°
Point dia. - .047", angle 90°
Internal
Retaining Ring
Pliers
Assortments
Packed Singly
MAJOR and SUPER MAJOR Sizes - For the REALLY BIG ONES
External
Retaining Ring
Pliers
T-3000 T-3100
for Ring Sizes
for Ring Sizes
3.50"-9.50" 2.75"-9.75"
876-756 876-757
for Ring Sizes
for Ring Sizes
6.25"-10.00" 6.75"-10.00"
Priced Singly
Effortless Single-
Handed Assembly
PLIERS
for EXTERNAL-
TYPE RINGS
For EXTERNAL
Rings up to approx.
1-1/2" shaft dia.
Pliers 6-5/8" long
Complete with one T-447 Point Assortment,
5 pairs. Packed Singly
For EXTERNAL Rings 1-1/2" to 4-1/2" shaft
diameter. Complete with one T-457 Point
Assortment, 3 pairs. Packed Singly.
Plastic storage box containing 1 pair of jaw
plate screws and 1 pair each of the following:
Point dia. - .108", angle 15°
Point dia. - .108", angle 45°
Point dia. - .123", angle 45°
Priced Singly
876-523 TIPS ONLY for use with Pliers T-3000 & T-3100 Unit Pkg. 1 Set - 2 Tips
876-767 TIPS ONLY for use with Pliers 876-756 & 876-757 Unit Pkg. 1 Set - 2 Tips
Note: Applicator Tools for RADIAL
Assembly on page E135.
One pliers for internal snap rings; another for external. Using
different types and sizes of interchangeable points, a wide range of
application is provided. Hexagonal points are automatically aligned
and secured in hexagonal shaped jaws, secured by a round head
screw in each tempered jaw plate...they cannot twist. Points are
highest quality tool steel, accurately machined and tempered.
Pliers 9-3/8" long.
INTERCHANGEABLE POINTS
Order by COMPLETE type number as listed below.
SERIES T-449P
For use in either T-445, T-446, or T-446X. Hex shapes
automatically aligned and locked in hex jaws of pliers.
Can’t turn! Tips ground with slight reverse taper for
more secure grip in ring hole.
TYPE
NO.
Tel: 1-800-265-8772 Fax: 519-744-0818
.039 point identified by plain shank.
.047 point identified by one notch on shank.
.074 point identified by two notches on shank.
.090 point identified by three notches on shank.
T-449P-039-15
(Point diameter .039", angle 15°)
T-449P-047-15
(Point diameter .047", angle 15°)
T-449P-074-15
(Point diameter .074", angle 15°)
15° Angle
45° Angle
90° Angle
Retaining Ring Tools
Outils à bagues de retenue
Includes 1 pair
of each size
listed at right
T-449P-039-45
(Point diameter .039", angle 45°)
T-449P-047-45
(Point diameter .047", angle 45°)
T-449P-074-45
(Point diameter .074", angle 45°)
T-449P-090-45
(Point diameter .090", angle 45°)
T-449P-039-90
(Point diameter .039", angle 90°)
T-449P-047-90
(Point diameter .047", angle 90°)
T-449P-074-90
(Point diameter .074", angle 90°)
Unit Package – 1 pair of one type.
Interchangeable
Points Set
T-448
for Internal / External
Snap Ring Pliers
Set includes:
Dia. Angle
.039" 15°
.047" 15°
.074" 15°
.039" 45°
.047" 45°
.074" 45°
.039" 90°
.047" 90°
.074" 90°
Set Priced Singly
SERIES T-459P
For T-455 and T-456. Hex shaped - cannot twist
because they are automatically aligned and secured
in hex jaws of the pliers. A round head screw on each
tempered jaw plate locks points in place. Point tips are
ground with slight reverse taper for more secure grip
in ring holes.
T-459P-108-15 (Point diameter .108", angle 15°)
T-459P-108-45 (Point diameter .108", angle 45°)
T-459P-123-45 (Point diameter .123", angle 45°)
.108" Point identified by plain shank
.123" Point identified by one notch on shank
Unit Package: 1 pair of one type.
E151
E