Spaenaur

More documents

Recommendations

Info

Inch Pouces 'POP' PowerLink 30 A Revolutionary Rivet Tool Includes wrench and four nose-pieces to set 3/32",1/8", 5/32" and 316" dia. 'Pop' Rivets. These pieces are out of the way improving access and preventing torn pockets. • A jam free front-end design. • • • A shorter nose housing for the back pocket. An innovative latch design keeps handles closed without cumbersome chains or wires. An overall design to minimize friction, improving performance and provide longevity. • A shorter grip opening ergonomically. designed for one hand operation. • • A Grips cover the length of the lever and body. Innovative soft handles are contoured to fit the hand. • Recessed rib design eliminates pinch points. “Pop” Riveter - Spare Parts Riveteuse “Pop” - pièces de rechange patented compound link design does the work for you. SPAENAUR No. 876-1815 Ergonomic Hand Rivet Tool. 50% easier to use than any rivet tool on the market. See chart on E30 for rivets that can be set by PowerLink 30. POWERLINK 30 REPLACEMENT PARTS <strong>Spaenaur</strong> No. Description 876-1823 (A) Body 876-1824 (B) Handle 876-1825 (C) Latch 876-1826 (D) Link 876-1827 (E) Jaw Carrier E CATALOG 13 All items on this page Priced Singly. KITS must be purchased as a complete set. 876-1819 Nosepiece KIT includes: (F) 1 Nosepiece (3/32") (G) 1 Nosepiece (1/8") (H) 1 Nosepiece (5/32") (J) 1 Nosepiece (3/16") (K) 1 Wrench 876-1820 Jaw Service KIT includes: (L) 1 Retaining Screw (M) 1 Jaw Pusher Spring (N) 1 Jaw Pusher (P) 2 Jaws (Q) 1 Cap 876-1821 Fulcrum Pin KIT includes: (R) 1 Handle Return Spring (S) 2 Fulcrum Pins (T) 2 Bushings (U) 2 Retaining Rings 876-1822 Handle Grip KIT includes: (V) 1 Body Grip (W) 1 Handle Grip Tel: 1-800-265-8772 Fax: 519-744-0818 E33 01 Aug 02
Riveting Tools Outils de rivetage 360° Swivel Head Inch and Metric Pouces et Métrique Rivet, Nut & Anchor Riveting Tools 876-1000 Inch Tool 877-1000 Metric Tool E Both tools come complete for installing Rivets, Wall Anchors, and AO, AT and AW Inserts. In Handy Plastic Case Priced Singly Installs RIVETS 876-1000 877-1000 Inch Tool complete. Metric Tool complete. Replacement parts are in stock at SPAENAUR. 876-1016 2.4 mm (3/32") Nose Piece 876-1016 3/32" Nose Piece * Available but not inlcluded in kit. 876-1017 1/8" Nose Piece 876-1018 5/32" Nose Piece 876-1019 3/16" Nose Piece 876-1020 2 Piece Jaws 876-1021 Spring 876-1009 #4-40 Draw Bar/Fixing Screw 876-1010 #8-32 Draw Bar/Fixing Screw 876-1011 #10-24 Draw Bar/Fixing Screw * 876-1556 #10-32 Draw Bar/Fixing Screw 876-1012 1/4"-20 Draw Bar/Fixing Screw 876-1014 Draw Pipe and Fastener 876-1015 Sleeve Seat 876-1022 2 Wrench Set 876-1022 2 Wrench Set draw bar head Installs WALL ANCHORS 876-1017 3.2 mm (1/8") Nose Piece 876-1018 4.0 mm (5/32") Nose Piece 876-1019 4.8 mm (3/16") Nose Piece 876-1020 2 Piece Jaws 876-1021 Spring 877-1001 M3 x 0.50 Pitch Draw Bar/Fixing Screw 877-1002 M4 x 0.70 Pitch Draw Bar/Fixing Screw 877-1003 M5 x 0.80 Pitch Draw Bar/Fixing Screw 877-1004 M6 x 1.00 Pitch Draw Bar/Fixing Screw 876-1014 Draw Pipe and Fastener 876-1015 Sleeve Seat draw bar head Installs THREADED INSERTS Not recommended for AK, AL, AH or Rivet Nut type Inserts. draw bar head sleeve seat sleeve draw pipe CATALOG 13 fastener draw bar sleeve seat nose piece fixing screw E34 04 Sept 01
Page 1:
- ISO 9001 CATALOG 13 ~1 SPAENAUR A
Page 4 and 5:
, ' '· I . ~ I l " .•. 4 .... ,
Page 6 and 7:
Nous sommes pret a vous servir •
Page 8 and 9:
It's Easy to Buy from Spaenaur How
Page 10 and 11:
Assortments and Storage Products As
Page 12 and 13:
Inch Pouces LARGE SIZE Assortments
Page 14 and 15:
Inch Pouces EMPTY PLASTIKITS 176-E
Page 16 and 17:
Inch and Metric Pouces et Métrique
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
(*814-498T) *Replacement Insert Tra
Page 42 and 43:
(*814-698T) (*Replacement Insert Tr
Page 44 and 45:
Plastic Compartment Boxes Boîtes p
Page 46 and 47:
... DRAWER CABINETS continued Heavy
Page 48 and 49:
... DRAWER CABINETS continued Heavy
Page 50 and 51:
Heavy Duty Welded Steel STORAGE BIN
Page 52 and 53:
Storage Units In addition to a wide
Page 54 and 55:
Heavy Duty Welded Steel Storage Bin
Page 56 and 57:
Durham Literature Racks provide a c
Page 58 and 59:
Tool Storage Systems Système d'emm
Page 60 and 61:
Storage/Assortment Cases Trousse d'
Page 62 and 63:
Storage Cases Méthode d'emmagasina
Page 64 and 65:
SCREWS & BOLTS (General Data) Donn
Page 66 and 67:
B “LONG-LOK” «Long-Lok» LOCKI
Page 68 and 69:
B Machine Screws - Slot Drive Vis m
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Assortments Assortiments Inch Pouce
Page 76 and 77:
Assortments • Plastikits Plastiki
Page 78 and 79:
Machine Screws - Slot Drive Vis mé
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Nylon Metal-Core Screws Vis en nylo
Page 92 and 93:
B Machine Screws - Phillips Drive V
Page 94 and 95:
B Assortments - Machine Screws Asso
Page 96 and 97:
Page 98 and 99:
Machine Screws Square Socket Drive
Page 100 and 101:
B Machine Screws Combination Sq. So
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
B Regular Size ASSORTMENTS ASSORTIM
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
B Threaded Inserts for Wood Pièces
Page 134 and 135:
• Joint Connector Nuts Écrous po
Page 136 and 137:
Wood Screws - Slot Drive Vis à boi
Page 138 and 139:
B Wood Screws - Slot Drive Vis à b
Page 140 and 141:
Wood Screws - Square Socket Drive V
Page 142 and 143:
B Wood Screws - Square Socket Drive
Page 144 and 145:
B Wood Screws - Torx ® Drive Vis
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
B Concrete Fastening System Inch Sy
Page 154 and 155:
B Concrete Fastening System Systèm
Page 156 and 157:
Inch Pouces SPECIAL ASSORTMENT ASSO
Page 158 and 159:
Inch Pouces Hardened STEEL Inch Siz
Page 160 and 161:
CATALOG 13 Inch Pouces Hardened STE
Page 162 and 163:
CATALOG 13 Inch Pouces ASS'T. DIA.
Page 164 and 165:
CATALOG 13 Inch Pouces INCH Sizes N
Page 166 and 167:
Metric Métrique TORX ® DRIVE - Ta
Page 168 and 169:
Inch Pouces SPECIAL ASSORTMENT - AS
Page 170 and 171:
Inch Pouces Hardened STEEL ZINC PLA
Page 172 and 173:
Inch Pouces 410 HEX WASHER HEAD L P
Page 174 and 175:
Inch Pouces TEKS ® Self-Drilling S
Page 176 and 177:
Inch Pouces STAINLESS STEEL TAPPING
Page 178 and 179:
Inch Pouces Priced Singly ASSORTMEN
Page 180 and 181:
Inch Pouces Thread-Cutting Screws V
Page 182 and 183:
Inch Pouces RECOMMENDED PILOT HOLE
Page 184 and 185:
CATALOG 13 Inch Pouces FLORTORX SCR
Page 186 and 187:
CATALOG 13 Inch Pouces STEEL SPAENA
Page 188 and 189:
CATALOG 13 Inch and Metric Pouces e
Page 190 and 191:
CATALOG 13 Inch Pouces SECURITY HEX
Page 192 and 193:
Inch Pouces SECURITY PHILLIPS DRIVE
Page 194 and 195:
Inch Pouces TORX ® TAMPER-RESISTAN
Page 196 and 197:
CATALOG 13 Inch Pouces Machine Scre
Page 198 and 199:
Page 200 and 201:
Inch Pouces STEEL PHILLIPS DRIVE (C
Page 202 and 203:
Inch Pouces STEEL “SEMS” Machin
Page 204 and 205:
Inch Pouces STEEL Case-hardened to
Page 206 and 207:
Metric Métrique STEEL “SEMS” A
Page 208 and 209:
Metric Métrique Automotive and Spe
Page 210 and 211:
B Bumper-Bar Bolts Boulons de barre
Page 212 and 213:
Self-Clinching Fasteners Attaches a
Page 214 and 215:
B Self-Clinching Studs Goujons auto
Page 216 and 217:
B Weld Screws Vis à souder E G 120
Page 218 and 219:
B Weld Screws Vis à souder 120° R
Page 220 and 221:
Weld Pins Goupille à souder ® Inc
Page 222 and 223:
B Hexagon Cap Screws Boulons de pr
Page 224 and 225:
B HEXAGON Cap Screws Boulons de pr
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Heavy Hex Structural Bolts Boulons
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
B L • 9 ® Fastening System Syst
Page 238 and 239:
B HEXAGON Bolts Boulons HEXAGONAUX
Page 240 and 241:
B L • 9 ® Fastening System Syst
Page 242 and 243:
L • 9 ® Fastening System Systèm
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
HEXAGON Cap Screws Boulons de préc
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Torque Data - 1960 Series ® Donné
Page 272 and 273:
CATALOG 13 Inch ® Pouces continued
Page 274 and 275:
Inch Pouces ® Assortments Assortim
Page 276 and 277:
B Hex Socket Cap Screws Vis à têt
Page 278 and 279:
Hex Socket Cap Screws Vis à tête
Page 280 and 281:
Hex Socket Cap Screws Boulons de pr
Page 282 and 283:
Page 284 and 285:
B Hex Socket Cap Screws Boulons de
Page 286 and 287:
Page 288 and 289:
A B Hex Socket Set Screws Vis de pr
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
B Hex Socket Cap Screws Boulons de
Page 300 and 301:
Page 302 and 303:
B “PELLETIZED” Hex Socket Cap S
Page 304 and 305:
Page 306 and 307:
Hex Socket Shoulder Screws Vis à
Page 308 and 309:
B Countr-Bor Screws Vis «Countr-Bo
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Metric Métrique Hex Socket Cap Scr
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Metric Métrique DIN 7991 Fully Thr
Page 332 and 333:
Hex Socket Cap Screws Vis à 6 pans
Page 334 and 335:
CATALOG 13 Metric Métrique ALLOY S
Page 336 and 337:
Metric Métrique METRIC BLUE ® HIG
Page 338 and 339:
Metric Métrique Cross-Drilled Hex
Page 340 and 341:
Metric Métrique Hex Nuts Écrous h
Page 342 and 343:
Metric Métrique METRIC BLUE ® HIG
Page 344 and 345:
Inch Pouces ALLOY STEEL DIA. THD. L
Page 346 and 347:
Inch Pouces STEEL Not Plated CUP PO
Page 348 and 349:
Inch Pouces Hex Socket Set Screws V
Page 350 and 351:
Inch Pouces NYLON TIP - BOUT DE NYL
Page 352 and 353:
Inch Pouces HEX SOCKET SET SCREWS w
Page 354 and 355:
CATALOG 13 Inch Pouces NYLON (Natur
Page 356 and 357:
Metric Métrique METRIC SLOTTED GRU
Page 358 and 359:
Metric Métrique CUP POINT A2 STAIN
Page 360 and 361:
Metric Métrique FLAT POINT DIAMETE
Page 362 and 363:
Metric Métrique STEEL Not Plated P
Page 364 and 365:
Inch Pouces Threads BA - British As
Page 366 and 367:
CATALOG 13 Inch Pouces See page B89
Page 368 and 369:
Inch Pouces STEEL GRADE 5 NOT PLATE
Page 370 and 371:
CATALOG 13 Metric Métrique METRIC
Page 372 and 373:
Inch Pouce Steel ELEVATOR BOLTS Not
Page 374 and 375:
Inch Pouce STEEL Plow Bolts No. 3 R
Page 376 and 377:
Inch Pouce U-Bolts Boulons en U CAT
Page 378 and 379:
Inch Pouce 304 STAINLESS STEEL EYE
Page 380 and 381:
CATALOG 13 Metric Métrique Regular
Page 382 and 383:
Inch Pouces Rod Ends with Bearings
Page 384 and 385:
Inch Pouces STAINLESS STEEL WROUGHT
Page 386 and 387:
Inch Pouces STAINLESS STEEL Type 30
Page 388 and 389:
Inch Pouces HOOK Fitting Drop Forge
Page 390 and 391:
Inch Pouces 18-8 STAINLESS STEEL TH
Page 392 and 393:
Metric Métrique MALLEABLE IRON WIN
Page 394 and 395:
Page 396 and 397:
B Threaded Rods Tiges filetées STE
Page 398 and 399:
Threaded Rods Tiges filetées Inch
Page 400 and 401:
Non-ferrousThreaded Rods Tiges file
Page 402 and 403:
Threaded Rod Tiges filetées Metric
Page 404 and 405:
Threaded Studs Goujons filetées In
Page 406 and 407:
Tool Post Screws Vis pour étrier I
Page 408 and 409:
B T-Slot & Flange Nuts Écrous et
Page 410 and 411:
T-Slot Bolts & Nuts Boulons et écr
Page 412 and 413:
Washers Rondelles Metric Métrique
Page 414 and 415:
Nuts, Inserts & Internally Threaded
Page 416 and 417:
Inch Pouces INCH CAP SCREW SIZES ST
Page 418 and 419:
CATALOG 13 Inch Pouces COUPLING NUT
Page 420 and 421:
Inch Pouces ASME/ANSI B18.2.2 CORRO
Page 422 and 423:
Metric Métrique ISO Metric Propert
Page 424 and 425:
Metric Métrique 10 ISO Metric Prop
Page 426 and 427:
Metric Métrique HEXAGON LOW NUTS C
Page 428 and 429:
Metric Métrique HEXAGON LOW NUTS C
Page 430 and 431:
Metric Métrique Slotted Hexagon Nu
Page 432 and 433:
Inch Pouces Slip-on ® Lock Nut Uni
Page 434 and 435:
Metric Métrique Hexagon Nuts Écro
Page 436 and 437:
Metric Métrique STEEL Metric Sizes
Page 438 and 439:
Inch Pouces STEEL Cadmium Plated HU
Page 440 and 441:
Page 442 and 443:
Inch Pouces Nylon Insert Hex Locknu
Page 444 and 445:
Inch Pouces Hexagon Nuts Écrous he
Page 446 and 447:
Metric Métrique NYLON INSERT HEX L
Page 448 and 449:
Metric Métrique Nylon Insert Lockn
Page 450 and 451:
Inch Pouces STEEL TOP DISTORTION, P
Page 452 and 453:
Inch Pouces STEEL REGULAR FLANGE SI
Page 454 and 455:
Page 456 and 457:
Inch Pouces LOCKING FEATURE F 45°
Page 458 and 459:
Page 460 and 461:
Inch Pouces ®˜ Locknuts Écrous i
Page 462 and 463:
Inch Pouces ® Weld Nuts Écrous à
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Inch Pouces Wing Nuts Écrous à or
Page 470 and 471:
Metric Métrique Wing Nuts Écrous
Page 472 and 473:
Page 474 and 475:
Metric Métrique METRIC - CAP and D
Page 476 and 477:
Inch Pouces T-NUTS PLAIN STEEL Roun
Page 478 and 479:
Page 480 and 481:
Inch Pouces CAPPED and SOLID ONE PI
Page 482 and 483:
Inch Pouces ® Security Hardware Qu
Page 484 and 485:
Inch Pouces Rapid Assembly Post and
Page 486 and 487:
Tinnerman ® Section Index Index po
Page 488 and 489:
CATALOG 13 Tel: 1-800-265-8772 Fax:
Page 490 and 491:
Tinnerman ® brand fasteners Attach
Page 492 and 493:
Inch Pouces Tinnerman ® brand fast
Page 494 and 495:
Inch Pouces FLAT-TYPE and Zip-on Fi
Page 496 and 497:
Inch Pouces J-TYPE Fasteners C X P
Page 498 and 499:
Inch Pouces J-TYPE Fasteners C X P
Page 500 and 501:
Inch Pouces U-TYPE Fasteners C X P
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Inch Pouces U-TYPE Fasteners (Speci
Page 512 and 513:
Inch Pouces U-TYPE Fasteners (Speci
Page 514 and 515:
Inch Pouces STANDARD NUT RETAINERS
Page 516 and 517:
Inch Pouces STANDARD NUT RETAINERS
Page 518 and 519:
Inch Pouces U-TYPE NUT RETAINERS A
Page 520 and 521:
Inch Pouces PUSH-ON TYPE Fasteners
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Inch Pouces TUBULAR TYPE Fasteners
Page 534 and 535:
Inch Pouces TUBULAR TYPE Fasteners
Page 536 and 537:
Inch Pouces DART TYPE Fasteners (Sp
Page 538 and 539:
Inch Pouces U-TYPE Fasteners (Stand
Page 540 and 541:
Inch Pouces SPECIAL PURPOSE Fastene
Page 542 and 543:
Inch Pouces CABLE, WIRE, ROD & TUBE
Page 544 and 545:
Inch Pouces CAP TYPE PUSH-ON Plasti
Page 546 and 547:
Page 548 and 549:
Metric Métrique Tinnerman ® brand
Page 550 and 551:
Inch Pouces Spring Nuts Écrous à
Page 552 and 553:
Page 554 and 555:
Push-On Hex Nuts Écrous hexagonale
Page 556 and 557:
Page 558 and 559:
CATALOG 13 Inch Pouces Design 1 Des
Page 560 and 561:
Page 562 and 563:
Inch Pouces Screw Anchors (Winged)
Page 564 and 565:
Inch Pouces NYLON ANCHORS Use with
Page 566 and 567:
CATALOG 13 Inch Pouces 1. Place #2
Page 568 and 569:
CATALOG 13 Inch Pouces EXPANDET ®
Page 570 and 571:
Inch Pouces RED HEAD WEDGE ANCHORS
Page 572 and 573:
Metric Métrique Projection Bolt Ty
Page 574 and 575:
Inch Pouce Bolt not included. ALLOY
Page 576 and 577:
CATALOG 13 Inch Pouces ••• ad
Page 578 and 579:
Inch Pouces Self-Clinching Nuts Sel
Page 580 and 581:
Metric Métrique PEM ® Self-Clinch
Page 582 and 583:
Page 584 and 585:
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
Page 592 and 593:
Page 594 and 595:
Page 596 and 597:
Inch and Metric AVK Industrial Prod
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
CATALOG 13 Inch Pouces See chart on
Page 604 and 605:
CATALOG 13 Inch Pouces See chart on
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Rivet Nut/Stud Power Tools Outils p
Page 612 and 613:
C Fasteners Attaches Design 1 Screw
Page 614 and 615:
Dodge ® Inserts Piéces filetées
Page 616 and 617:
Barb-Sert ® «Barb-Sert ® » Inch
Page 618 and 619:
C "E-Z Lok" Press Inserts Douilles
Page 620 and 621:
C Rivet Nuts Écrous à Rivets Blin
Page 622 and 623:
C Rivet Nut Header Tools Écrous Ri
Page 624 and 625:
Rivet Nuts Écrous à Rivets Metric
Page 626 and 627:
C Rivet Nut Header Tools Écrous no
Page 628 and 629:
Page 630 and 631:
General Application Procedures Mode
Page 632 and 633:
C Thread Repair Inserts Pièces fil
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Thread Repair Inserts Pièces filet
Page 642 and 643:
Washers Rondelles Flat Washers Rond
Page 644 and 645:
Inch Pouces Steel Fender Washers Lo
Page 646 and 647:
Inch Pouces cont'd. Additional Stee
Page 648 and 649:
Inch Pouces “STANDARD” 316 Stai
Page 650 and 651:
“STANDARD” SPAENAUR No. BOLT SI
Page 652 and 653:
CATALOG 13 Inch Pouces SPAENAUR No.
Page 654 and 655:
Metric Métrique ~DIN 125B ~ ISO 70
Page 656 and 657:
CATALOG 13 Metric Métrique Metric
Page 658 and 659:
Metric Métrique Metric Flat Washer
Page 660 and 661:
Metric Métrique DIN 1440 ~ DIN EN
Page 662 and 663:
Metric Métrique Sealing Rings Anne
Page 664 and 665:
Inch Pouces Stainless - Aluminum -
Page 666 and 667:
Metric Métrique Spring (Split) Loc
Page 668 and 669:
Page 670 and 671:
Page 672 and 673:
Inch Pouces ASSORTMENT ASSORTIMENT
Page 674 and 675:
Metric Métrique METRIC STYLES DIN
Page 676 and 677:
Metric Métrique Tooth Lockwasher A
Page 678 and 679:
VIBRATION PROOF FASTENERS R Data Sh
Page 680 and 681:
Page 682 and 683:
Predictable performance for rated l
Page 684 and 685:
INTRODUCTION TO COST-SAVING, SPACE-
Page 686 and 687:
Dynamic Loading & Fatigue Life Dyna
Page 688 and 689:
CATALOG 13 The tolerances shown on
Page 690 and 691:
CATALOG 13 Nominal Dia. Bolt stress
Page 692 and 693:
CATALOG 13 Inch Pouces …Continued
Page 694 and 695:
CATALOG 13 Inch Pouces AK Series FO
Page 696 and 697:
CATALOG 13 Metric Métrique Priced
Page 698 and 699:
Metric Métrique NOMENCLATURE P = l
Page 700 and 701:
Page 702 and 703:
Page 704 and 705:
Page 706 and 707:
Inch Pouces LIVE LOAD FLANGE AND GA
Page 708 and 709:
Inch Pouces WAVE SPRING TENSION WAS
Page 710 and 711: Metric Métrique Spring Tension Was
Page 712 and 713: Inch Pouce Rubber Washers Rondelles
Page 714 and 715: CATALOG 13 Inch Pouce NYLTITE ROLLE
Page 716 and 717: CATALOG 13 Inch Pouce Material: 6/6
Page 718 and 719: Inch and Metric Pouce et Métrique
Page 720 and 721: Inch Pouce SHIM RINGS WITH KEYWAY S
Page 722 and 723: CATALOG 13 Inch Pouce BLUE TEMPERED
Page 724 and 725: Inch Pouce Steel - Zinc Plated Unit
Page 726 and 727: Inch Pouce Steel - Zinc Plated Unit
Page 728 and 729: Inch Pouce ALIGNING SHIMS FOR START
Page 730 and 731: Solid Steel Rivets Rivets pleins en
Page 732 and 733: Solid Aluminum Rivets Rivets solide
Page 734 and 735: Solid Tinners’ Rivets Rivets soli
Page 736 and 737: Steel Shallow Tubular Rivets Rivets
Page 738 and 739: Steel Tubular Rivets Rivets tubulai
Page 740 and 741: E Steel Tubular Rivets Rivets tubul
Page 742 and 743: E Split Rivets Rivets fendu Split R
Page 744 and 745: Shallow Tubular Rivets Rivets tubul
Page 746 and 747: Pop ® Rivets Rivets «Pop ® » AL
Page 748 and 749: Pop ® Rivets Rivets «Pop ® » AL
Page 750 and 751: E Pop ® Rivets Rivets «Pop ® »
Page 752 and 753: Inch Pouces STEEL Dome Head Open-en
Page 754 and 755: Inch Pouces Pop ® Rivets Rivets «
Page 756 and 757: Inch Pouces Priced Singly ASSORTMEN
Page 758 and 759: CATALOG 13 Inch Pouces POP ® 5000
Page 762 and 763: Inch Pouces 360° Swivel Head SPAEN
Page 764 and 765: Inch Pouces Structural — Self-plu
Page 766 and 767: Inch Pouces “Cherry” Rivet Pull
Page 768 and 769: CATALOG 13 Inch Pouces Nominal SPAE
Page 770 and 771: Inch Pouces ALUMINUM UNIT G L PACKA
Page 772 and 773: Inch Pouces UNIT PACKAGE 500 RIVETS
Page 774 and 775: Inch Pouces Nylon Drive Rivets High
Page 776 and 777: Inch Pouces Cotter Pins Goupilles f
Page 778 and 779: We source from 1,200 domestic and i
Page 780 and 781: Metric Métrique Metric Cotter Pins
Page 782 and 783: Metric Métrique Metric Cotter Pins
Page 784 and 785: Inch Pouces Hitch Pin Clips Agrafes
Page 788 and 789: Metric Métrique Hitch Pin Clips Ag
Page 790 and 791: Metric Métrique 301/302 Stainless
Page 792 and 793: Metric Métrique Metric Type B Spri
Page 794 and 795: Inch Pouces Hair Pin Cotters Goupil
Page 798 and 799: Inch Pouces FAST-POSITIVE SAFETY LO
Page 800 and 801: Inch and Metric Pouces et Métrique
Page 802 and 803: Metric Métrique Safety Lynch Pins
Page 804 and 805: CATALOG 13 Metric Métrique Lynch P
Page 806 and 807: Inch Pouces C D B E STYLE A to 7/16
Page 808 and 809: CATALOG 13 Inch Pouces STEEL Materi
Page 810 and 811:
Inch Pouces Quick Release Pins Quic
Page 812 and 813:
Inch Pouces C-1008/C-1018 Grade STE
Page 814 and 815:
Inch Pouces 300 Series STAINLESS ST
Page 816 and 817:
Inch Pouces P.C. 699 STEEL DROP FOR
Page 818 and 819:
Page 820 and 821:
Metric Métrique Dowel Pins Goupill
Page 822 and 823:
Metric Métrique Dowel Pins Goupill
Page 824 and 825:
Inch Pouces Taper Pins Goupilles co
Page 826 and 827:
Taper Pins Goupilles coniques Metri
Page 828 and 829:
Taper Pins Goupilles coniques Metri
Page 830 and 831:
Dowel Pins Goupilles cylindriques M
Page 832 and 833:
Spring Tension Pins Goupilles tende
Page 834 and 835:
Page 836 and 837:
Page 838 and 839:
Coiled Spring Pins Goupilles à res
Page 840 and 841:
Page 842 and 843:
Page 844 and 845:
E Woodruff Keys Clavettes «Woodruf
Page 846 and 847:
E Shaft Keys Clés d’arbre SHAFT
Page 848 and 849:
Machine Key Stock Barres à clés R
Page 850 and 851:
E Drill Rod Rounds Acier en rondin
Page 852 and 853:
Steel Rounds Barres rondes STEEL CO
Page 854 and 855:
E Shaft Collars and Couplings Annea
Page 856 and 857:
Internal - Retaining Rings - Extern
Page 858 and 859:
Page 860 and 861:
E Retaining Rings - External Bagues
Page 862 and 863:
E Retaining Rings - Internal Bagues
Page 864 and 865:
Page 866 and 867:
Page 868 and 869:
E Retaining Rings - Internal Bagues
Page 870 and 871:
Page 872 and 873:
Inch Pouces Crimp-on Retainers Bagu
Page 874 and 875:
Metric Métrique DIN 6799 Retaining
Page 876 and 877:
CATALOG 13 Inch Pouces PLIERS for I
Page 878 and 879:
Inch Pouces Retaining Ring Tools Ou
Page 880 and 881:
F Furniture Glides Patins pour pied
Page 882 and 883:
Furniture Glides Patins pour pieds
Page 884 and 885:
Leg Levelers Patins pour pieds de m
Page 886 and 887:
Furniture Glides Patins pour pieds
Page 888 and 889:
Thread Adapters Adaptateurs de file
Page 890 and 891:
F Furniture Glides Patins pour pied
Page 892 and 893:
Corrugated Fasteners / Mending Plat
Page 894 and 895:
F Catches / Swivel Plates Fermeture
Page 896 and 897:
Clips & Hangers, Etc. Pinces & croc
Page 898 and 899:
Hose, Tube and Wiring Components Co
Page 900 and 901:
Inch Pouces LS: 9/16" (14 mm) wide
Page 902 and 903:
Metric Métrique ® Heavy Duty Hose
Page 904 and 905:
Metric Métrique Hose Clamps Collie
Page 906 and 907:
Inch Pouces ASSORTMENT ASSORTIMENT
Page 908 and 909:
Inch Pouces 2-EAR CLAMP ASSORTMENTS
Page 910 and 911:
Inch Pouces SPRING-GRIP HOSE CLAMPS
Page 912 and 913:
Inch Pouces Colour: Natural, Clear
Page 914 and 915:
Inch Pouces Miniature Nylon Fitting
Page 916 and 917:
Inch Pouces Miniature Barbed Tees D
Page 918 and 919:
Inch Pouces QUICK DISCONNECT LUER F
Page 920 and 921:
Inch Pouces C-973 White Nylon HOSE
Page 922 and 923:
Inch Pouces Locking Cable Ties Coll
Page 924 and 925:
Inch Pouces Tubing & Wiring Fastene
Page 926 and 927:
Inch Pouces Tubing & Wiring Fastene
Page 928 and 929:
Inch Pouces Lightweight - Insulated
Page 930 and 931:
Inch Pouces “HALF” CLIPS W Tubi
Page 932 and 933:
Inch Pouces T-CLIPS Fastening Syste
Page 934 and 935:
Inch Pouces TM Braided Expandable S
Page 936 and 937:
CATALOG 13 Metric Métrique ASSORTM
Page 938 and 939:
Inch Pouces Steel ROUND STEEL SPACE
Page 940 and 941:
Inch Pouces NYLON 6/6 Printed Circu
Page 942 and 943:
Metric Métrique METRIC Threaded He
Page 944 and 945:
CATALOG 13 Metric Métrique Steel /
Page 946 and 947:
Solderless and Soldering Terminals
Page 948 and 949:
Insulated Solderless Terminals Born
Page 950 and 951:
Insulated Solderless Terminals Coss
Page 952 and 953:
Solderless Terminals Cosses sans so
Page 954 and 955:
Assortments / Tools Assortiments /
Page 956 and 957:
G Heat Shrink Connectors Connecteur
Page 958 and 959:
Battery Terminals Terminaux de Batt
Page 960 and 961:
Wiring Lugs & Splices Ergots et Ép
Page 962 and 963:
G Connector Housings .093"/.062" Lo
Page 964 and 965:
.062" (1,58 mm) Connector Housings
Page 966 and 967:
.093" 2,36 mm Connector Housings Lo
Page 968 and 969:
KK ® Modular Interconnecting Syste
Page 970 and 971:
For the Electronics Engineer! Pour
Page 972 and 973:
For the Electronics Engineer! Pour
Page 974 and 975:
Fittings, Springs and Auto Trim Har
Page 976 and 977:
Inch Pouces Plug Buttons Bouchons F
Page 978 and 979:
Inch Pouces High Thrust Air Nozzles
Page 980 and 981:
Inch Pouces STRAIGHT THREAD MAGNETI
Page 982 and 983:
Metric Métrique DIN 906 Hexagon So
Page 984 and 985:
Inch Pouces HEX. 5/8" 1/4" All Fitt
Page 986 and 987:
Inch Pouces STAINLESS STEEL INCH Gr
Page 988 and 989:
Metric Métrique M1 LUBRICATING NIP
Page 990 and 991:
Inch Pouces STEEL INCH Sizes See Pa
Page 992 and 993:
Inch Pouces Utility Spring Assortme
Page 994 and 995:
CATALOG 13 Inch Pouces *Sizes avail
Page 996 and 997:
Inch Pouces Moulding Fasteners Atta
Page 998 and 999:
Inch Pouces Moulding Fasteners Atta
Page 1000 and 1001:
Inch Pouces " MB-81 (4728594) 1 "
Page 1002 and 1003:
Inch Pouces Clips & Fasteners Pince
Page 1004 and 1005:
Inch Pouces THROTTLE ROD CLIPS Clip
Page 1006 and 1007:
Inch Pouces Auto Glass Shop Items A
Page 1008 and 1009:
Inch Pouces C-1089 Windshield Revea
Page 1010 and 1011:
Inch Pouces Headlight Adjusting Scr
Page 1012 and 1013:
Inch Pouces Headlamp Screws, etc. -
Page 1014 and 1015:
Inch Pouces NYLON - License Fastene
Page 1016 and 1017:
Inch Pouces FLEXIBLE CLEAR “VINYL
Page 1018 and 1019:
Nylon 6/6 Hole Plugs Bouchons insta
Page 1020 and 1021:
Anti-Vibration Mounts Amortisseurs
Page 1022 and 1023:
J Anti-Vibration Mounts Amortisseur
Page 1024 and 1025:
Bolt-on Vibration Mounts and Bumper
Page 1026 and 1027:
Page 1028 and 1029:
J Anti-Vibration Mounts Amortisseur
Page 1030 and 1031:
Page 1032 and 1033:
Page 1034 and 1035:
Anti-vibration Leveling Mounts Amor
Page 1036 and 1037:
Anti-vibration Leveling Mounts Amor
Page 1038 and 1039:
Page 1040 and 1041:
Page 1042 and 1043:
Page 1044 and 1045:
Tube Caps Chapeaux de tubes Inch Po
Page 1046 and 1047:
Tube Caps Chapeaux de tubes Inch Po
Page 1048 and 1049:
J Tapered Caps & Plugs Chapeaux et
Page 1050 and 1051:
Pull Plugs Bouchons à tirette Inch
Page 1052 and 1053:
Snap-In Plugs Type 1 & 2 Bouchons i
Page 1054 and 1055:
J Nylon Plug Buttons Bouchons en ny
Page 1056 and 1057:
Standard Threaded Caps Capuchons no
Page 1058 and 1059:
Threaded Pipe Plugs Bouchons filet
Page 1060 and 1061:
J Decorative Screw Cover Caps Capuc
Page 1062 and 1063:
Mushroom and Stem Bumpers Butoirs t
Page 1064 and 1065:
Rubber Bumpers — General Purpose
Page 1066 and 1067:
Plug Bumpers Butoirs bouchons Mater
Page 1068 and 1069:
Plug Bumpers Butoirs bouchons Inch
Page 1070 and 1071:
Rubber Bumpers Boutoirs en caoutcho
Page 1072 and 1073:
J Crutch, Stool and Furniture Tips
Page 1074 and 1075:
Rubber Washers Rondelles en Caoutch
Page 1076 and 1077:
Inch Pouces Material: Hardness: Col
Page 1078 and 1079:
CATALOG 13 Inch Pouces " " " " C B
Page 1080 and 1081:
Inch Pouces Bell-Mouth Nylon Strain
Page 1082 and 1083:
Page 1084 and 1085:
Inch Pouces Material: SBR unless ot
Page 1086 and 1087:
CATALOG 13 Inch Pouces …Continued
Page 1088 and 1089:
Inch Pouces Miscellaneous Rubber It
Page 1090 and 1091:
Inch Pouces Plastic Knobs Boutons e
Page 1092 and 1093:
Page 1094 and 1095:
Page 1096 and 1097:
Inch Pouces Plastic Handles Poigné
Page 1098 and 1099:
Inch Pouces Plastic Handles Poingé
Page 1100 and 1101:
a C L H Inch Pouces CRANK HANDLE Fe
Page 1102 and 1103:
J Plastic Knobs Boutons en plastiqu
Page 1104 and 1105:
O-Ring Seals Joints toriques «O-Ri
Page 1106 and 1107:
Page 1108 and 1109:
O-Ring Seals of Viton Joints toriqu
Page 1110 and 1111:
J O-Ring Seals Joints toriques «O-
Page 1112 and 1113:
Page 1114 and 1115:
Rubber and Plastic Extrusions Extru
Page 1116 and 1117:
Inch Pouce Extruded Channels Canaux
Page 1118 and 1119:
Inch Pouce "WEDGE-TITE" WEDGE INSER
Page 1120 and 1121:
Inch Pouce Extruded Special Shapes
Page 1122 and 1123:
Inch Pouce Extruded Special Shapes
Page 1124 and 1125:
Inch Pouce Door Seals Collants (por
Page 1126 and 1127:
Inch Pouce DUAL DUROMETER SPONGE AN
Page 1128 and 1129:
Inch Pouce Trim Bordures QUICKEDGE
Page 1130 and 1131:
Inch Pouce Flexible Weatherstrips B
Page 1132 and 1133:
Inch Pouce Channel Lining and Weath
Page 1134 and 1135:
Inch Pouce Substance & Structure Th
Page 1136 and 1137:
Inch Pouce STICKER-TITE Self-Sealin
Page 1138 and 1139:
Inch Pouce P.V.C. “SEAL-KING” (
Page 1140 and 1141:
Inch Pouces Wrap ® ’n Seal Indus
Page 1142 and 1143:
Page 1144 and 1145:
Page 1146 and 1147:
Inch Pouces VINYL SOFT-FOOT ANTI-F
Page 1148 and 1149:
Inch Pouces L U X U R F O A M “LU
Page 1150 and 1151:
Multi-Purpose Handles & Locks Poign
Page 1152 and 1153:
Page 1154 and 1155:
L Multi-Purpose Handles & Locks Poi
Page 1156 and 1157:
Universal Door Handles Poignées de
Page 1158 and 1159:
Page 1160 and 1161:
Page 1162 and 1163:
Quarter-Turn Cabinet Latches Poign
Page 1164 and 1165:
Multi-Purpose Handles and Locks Poi
Page 1166 and 1167:
Catches Loquets MAGNETIC CATCH and
Page 1168 and 1169:
Clamp Fasteners Agrafes à bascule
Page 1170 and 1171:
Page 1172 and 1173:
Page 1174 and 1175:
Page 1176 and 1177:
Page 1178 and 1179:
Page 1180 and 1181:
Page 1182 and 1183:
L Push Button Fastener Attache pous
Page 1184 and 1185:
50F Quarter Turn Fastener Attache
Page 1186 and 1187:
L Quarter Turn Fasteners Attaches
Page 1188 and 1189:
Quarter Turn Fasteners Attaches à
Page 1190 and 1191:
Door Hardware Items Articles de qui
Page 1192 and 1193:
Page 1194 and 1195:
Page 1196 and 1197:
L Multi-Purpose Handles & Cams Poig
Page 1198 and 1199:
Padlockable Handle Poignée verroui
Page 1200 and 1201:
Door Hardware Quincaillerie pour le
Page 1202 and 1203:
L Door Hardware Items Articles de q
Page 1204 and 1205:
Latches Loquets ® Inch Pouces SLEE
Page 1206 and 1207:
Latches Loquets Push Latch ® Inch
Page 1208 and 1209:
Latches Loquets Inch Pouces This st
Page 1210 and 1211:
Slam Latches Cliquets à claquer Fl
Page 1212 and 1213:
Slam Latches Cliquets à claquer In
Page 1214 and 1215:
Slam Latches Cliquets à claquer Ba
Page 1216 and 1217:
Slam Latches Cliquets à claquer Th
Page 1218 and 1219:
Cab Door Hardware Quincaillerie pou
Page 1220 and 1221:
Cab Door Hardware Quincaillerie pou
Page 1222 and 1223:
Flush-Mounted Paddle Handle Latches
Page 1224 and 1225:
L Van Door Hardware Quincaillerie p
Page 1226 and 1227:
Van Door Hardware Quincaillerie pou
Page 1228 and 1229:
Page 1230 and 1231:
Page 1232 and 1233:
Page 1234 and 1235:
Page 1236 and 1237:
Van Hardware Quincaillerie pour fou
Page 1238 and 1239:
Folding Seat Brackets and Step Appu
Page 1240 and 1241:
Van Hardware Qunicaillerie pour fou
Page 1242 and 1243:
"Reach-in" Refrigerator Locks Serru
Page 1244 and 1245:
Page 1246 and 1247:
Page 1248 and 1249:
Cam Lift Hinges Pentures de relevag
Page 1250 and 1251:
Strap Hinges Pentures en acier HEAV
Page 1252 and 1253:
Steel Strap Hinges Pentures en acie
Page 1254 and 1255:
Steel Hinges Charnières en acier I
Page 1256 and 1257:
Steel Hinges Charnières en acier D
Page 1258 and 1259:
Plastic Hinges Charnières en plast
Page 1260 and 1261:
Hinges Charnières 2-29/32" (74 mm)
Page 1262 and 1263:
L Continuous Hinges Charnières con
Page 1264 and 1265:
Hinges Charnières Inch Pouces Hing
Page 1266 and 1267:
Hood Clamps Attache-capots NOTE: De
Page 1268 and 1269:
Hood Fastener Straps Attaches à sa
Page 1270 and 1271:
We Are Proud To Represent …the Le
Page 1272 and 1273:
Adjustable Grip Latches Cliquets à
Page 1274 and 1275:
T-handle Latch Mid-size series 10
Page 1276 and 1277:
INSTALLATION FOR SPRING COMPRESSION
Page 1278 and 1279:
CATALOG 13 Single-hole Mount Large
Page 1280 and 1281:
Lift and Turn ® Latches Cliquets
Page 1282 and 1283:
Flush Sealed Latch • Use in NEMA-
Page 1284 and 1285:
Grabber Door Catch Mounts inside yo
Page 1286 and 1287:
CATALOG 13 Slam-action Keylatch-in
Page 1288 and 1289:
Paddle Latches Miniature Size • I
Page 1290 and 1291:
; ; ;;; CATALOG 13 Pocket Pull ® F
Page 1292 and 1293:
CATALOG 13 Concealed Pulls • A pu
Page 1294 and 1295:
Dual Lock ® Butt-Joint Panel Latch
Page 1296 and 1297:
;;; Soft Latch ® Draw Latch • Al
Page 1298 and 1299:
Over-centre Draw Latch Assembly - S
Page 1300 and 1301:
Versa Latch ® Tension Latch Small
Page 1302 and 1303:
Adjustable Draw Latch Multiple size
Page 1304 and 1305:
~~UTHCd Designer Series Draw Latch
Page 1306 and 1307:
Draw Latches Cliquets d'attelage 10
Page 1308 and 1309:
Link Lock ® Rotary Action Latch La
Page 1310 and 1311:
Link Lock ® Rotary Action Latch Sm
Page 1312 and 1313:
Concealed Hinges… Provide good lo
Page 1314 and 1315:
CATALOG 13 Metal Lift-Off Hinges
Page 1316 and 1317:
Friction Adjustable Hinges For free
Page 1318 and 1319:
Swell Latches Heavy Duty Version
Page 1320 and 1321:
Swell Action Latches • Latches in
Page 1322 and 1323:
Series 82 Selection Guide To select
Page 1324 and 1325:
Series 82 Sealing Washer Cupped Qua
Page 1326 and 1327:
Quarter Turn Fasteners Attaches à
Page 1328 and 1329:
Spring Loaded Plunger • Provides
Page 1330 and 1331:
VELCRO ® Fasteners Attaches «VELC
Page 1332 and 1333:
Page 1334 and 1335:
Page 1336 and 1337:
VELCRO ® Buckles and Hardware Bouc
Page 1338 and 1339:
VELCRO ® Buckles and Hardware Bouc
Page 1340 and 1341:
M Slide Fasteners Fermetures à gli
Page 1342 and 1343:
Bungee Cords Corde élastique Inch
Page 1344 and 1345:
Elastic Cable / TowStraps and Rope
Page 1346 and 1347:
M Hardware - for Shockcord, etc. Qu
Page 1348 and 1349:
Rubber Tie-downs Fixations en caout
Page 1350 and 1351:
Tie-Downs Fixations PROTECT YOUR IN
Page 1352 and 1353:
Inch Pouces SYNTHETIC ROPE IN HANDY
Page 1354 and 1355:
Inch Pouces Needles, etc. Aiguilles
Page 1356 and 1357:
Page 1358 and 1359:
Metric Métrique Delrin 500 Strap B
Page 1360 and 1361:
Metric Métrique Metric Self-lockin
Page 1362 and 1363:
Metric Métrique Metric SNAP CATCH
Page 1364 and 1365:
Inch Pouces Plastic Buckles & Faste
Page 1366 and 1367:
Inch Pouces SNAP FASTENERS Flanged
Page 1368 and 1369:
Inch Pouces Fastener Tools Outils d
Page 1370 and 1371:
Inch Pouce Fabric & Leather Fastene
Page 1372 and 1373:
CATALOG 13 Inch Pouce SHEET BRASS G
Page 1374 and 1375:
M Standardized Brass Eyelets Oeille
Page 1376 and 1377:
Upholsterers’ Tools Outils de tap
Page 1378 and 1379:
Upholsters’ Tools Outils de tapis
Page 1380 and 1381:
Upholstery Tufting Buttons Boutons,
Page 1382 and 1383:
Cushion Springs and Clips Ressorts
Page 1384 and 1385:
Decorative Upholstery Nails Clous d
Page 1386 and 1387:
Stainless Steel Nails Clous en acie
Page 1388 and 1389:
Metal Rings Anneaux métalliques SP
Page 1390 and 1391:
M Metal “Dee” Rings and Clips A
Page 1392 and 1393:
M Hardware Miscellaneous Quincaille
Page 1394 and 1395:
Snaps, Hooks, etc. Mousquetons, cro
Page 1396 and 1397:
Buckles, Snaps, Hooks, etc. Boucles
Page 1398 and 1399:
Wire Rope Clips, Clamps, Thimbles a
Page 1400 and 1401:
Wire Rope Câble métallique Inch P
Page 1402 and 1403:
Inch Pouces Grade 30 Clevis Slip Ho
Page 1404 and 1405:
Quick Connecting Links Maillon à b
Page 1406 and 1407:
Plastic Chain and Attachments Chaî
Page 1408 and 1409:
Hazet ® Tools Outils Hazet ® Nut
Page 1410 and 1411:
® Hex Nut-Drivers Functional dimen
Page 1412 and 1413:
® Double Open-End Wrenches ISO 108
Page 1414 and 1415:
® Combination Box and Open-End Wre
Page 1416 and 1417:
® Double-Hex Box Wrenches DIN 897,
Page 1418 and 1419:
® Flat Chisels Chrome-Vanadium Mat
Page 1420 and 1421:
® Grip Pliers Especially designed
Page 1422 and 1423:
® Pullers Special Steel Galvanized
Page 1424 and 1425:
® Offset Screwdrivers DIN 5200 Chr
Page 1426 and 1427:
® Screwdrivers For Slotted Screws
Page 1428 and 1429:
® Stud Extractors Chrome-Vanadium
Page 1430 and 1431:
® Hex Socket Chrome-Vanadium 1/4"
Page 1432 and 1433:
® 167 x 97 x 37 mm 1/4" Socket Set
Page 1434 and 1435:
® 6 Point Sockets 3/8 inch 6 Point
Page 1436 and 1437:
® Phillips Socket Sockets Chrome-V
Page 1438 and 1439:
® 3/8 inch 344 x 188 x 56 mm 6 Poi
Page 1440 and 1441:
® 6 Point Sockets DIN 3124, ISO 27
Page 1442 and 1443:
® Speeder DIN 3122, ISO 3315 Chrom
Page 1444 and 1445:
® Spark Plug Socket with Universal
Page 1446 and 1447:
® XZN Sockets 1/2 inch Sockets Chr
Page 1448 and 1449:
® 320 x 128 x 58 mm Hex Sockets 1/
Page 1450 and 1451:
® Ratchet Head Chrome-Vanadium 3/4
Page 1452 and 1453:
® Extensions DIN 3123, ISO 3316 Ch
Page 1454 and 1455:
® Diagonal Cutters Special Steel F
Page 1456 and 1457:
® Lockring Pliers Spring Steel Rev
Page 1458 and 1459:
® Automatic Wire Stripper For soli
Page 1460 and 1461:
® Ball Peen Hammers Chrome-Vanadiu
Page 1462 and 1463:
® Hex Head Wrench Set DIN 911, ISO
Page 1464 and 1465:
® Screwdriver Bits Screwdriver Bit
Page 1466 and 1467:
® CATALOG 13 Adapters Chrome-Vanad
Page 1468 and 1469:
® Standard Torque Wrench SYSTEM 50
Page 1470 and 1471:
® Trimming Knife (protected by des
Page 1472 and 1473:
Hand Tools Outils portatifs Allen
Page 1474 and 1475:
Page 1476 and 1477:
Page 1478 and 1479:
CATALOG 13 Inch Pouces KEY FIT TABL
Page 1480 and 1481:
Metric Métrique HEX KEYS Metric DI
Page 1482 and 1483:
Metric Métrique DIN 911 METRIC HEX
Page 1484 and 1485:
Inch Pouces Key Wrenches of ALLOY S
Page 1486 and 1487:
Eliminator Socket Sets «Eliminator
Page 1488 and 1489:
Page 1490 and 1491:
Page 1492 and 1493:
Torque Wrenchs Clefs á torsion Inc
Page 1494 and 1495:
Socket Sets Ensembles de douilles S
Page 1496 and 1497:
Socket Sets Ensembles de douilles M
Page 1498 and 1499:
Socket Sets Ensembles de douilles S
Page 1500 and 1501:
Super Palmster «Super Palmster» S
Page 1502 and 1503:
P Hex Bits Mèches hexagonales Inse
Page 1504 and 1505:
TORX ® DRIVE Bits Mèches «TORX
Page 1506 and 1507:
Screwdrivers Tournevis Inch Pouces
Page 1508 and 1509:
Insert Bit Kit Trousse d'embouts In
Page 1510 and 1511:
Screwdrivers Tournevis A wide range
Page 1512 and 1513:
Screwdrivers Tournevis Screwdriver
Page 1514 and 1515:
Uni-Driver ® «Uni-Driver ® » RA
Page 1516 and 1517:
P Straight Shank Jobbers’ Drills
Page 1518 and 1519:
High Speed Drills Forets rapides en
Page 1520 and 1521:
P Rotary Masonry Drill Forets rotat
Page 1522 and 1523:
Countersinks Fraises Countersinks y
Page 1524 and 1525:
High Speed Straight Shank Jobbers
Page 1526 and 1527:
Jobbers’ Straight Shank Twist Dri
Page 1528 and 1529:
Twist Drills For Wood Forets hélic
Page 1530 and 1531:
Extra Long Twist Drills Forets extr
Page 1532 and 1533:
Twist Drills With Morse Taper Shank
Page 1534 and 1535:
Masonry Drills Forets pour maçonne
Page 1536 and 1537:
Precisions - Countersinks Fraise de
Page 1538 and 1539:
Milling Cutters Fraises Metric Mét
Page 1540 and 1541:
Reamers Alésoirs Metric Métrique
Page 1542 and 1543:
Reamers Alésoirs Metric Métrique
Page 1544 and 1545:
Reamers Alésoirs METRIC QUICK ACTI
Page 1546 and 1547:
CATALOG 13 STD. SET TYPE 0420 Taper
Page 1548 and 1549:
Inch Pouces Tap Terminology Termino
Page 1550 and 1551:
CATALOG 13 Inch Pouces TAPS HIGH SP
Page 1552 and 1553:
Page 1554 and 1555:
Metric Métrique STRAIGHT FLUTE MET
Page 1556 and 1557:
Metric Métrique STRAIGHT FLUTE MET
Page 1558 and 1559:
Metric Métrique Hand or Machine Ta
Page 1560 and 1561:
Inch Pouces Pipe Taps and Dies Tara
Page 1562 and 1563:
Metric Métrique Round Dies Écrous
Page 1564 and 1565:
Metric Métrique METRIC FINE THREAD
Page 1566 and 1567:
CATALOG 13 Metric Métrique METRIC
Page 1568 and 1569:
Inch and Metric Pouce et Métrique
Page 1570 and 1571:
Page 1572 and 1573:
Page 1574 and 1575:
Inch Pouce Feeler Gauges Jauges d'
Page 1576 and 1577:
Page 1578 and 1579:
Inch Pouce Measuring Devices Dispos
Page 1580 and 1581:
Page 1582 and 1583:
Page 1584 and 1585:
Metric Métrique Adjustable Spanner
Page 1586 and 1587:
CATALOG 13 Metric Métrique DIN 181
Page 1588 and 1589:
CATALOG 13 Metric Métrique A/F SPA
Page 1590 and 1591:
Inch Pouces Box Wrenches 12 Point,
Page 1592 and 1593:
Page 1594 and 1595:
Inch Pouces Identification Tools Ou
Page 1596 and 1597:
CATALOG 13 Inch Pouces A WHOLE TOOL
Page 1598 and 1599:
Inch Pouces Locking "C" Clamps Brid
Page 1600 and 1601:
Inch Pouce SPAENAUR No. 876-381 Hea
Page 1602 and 1603:
Inch Pouces Toggle Action Clamps Ag
Page 1604 and 1605:
Inch Pouces RED HEAD PUSH-PULL TYPE
Page 1606 and 1607:
Inch Pouces Professional Hacksaw St
Page 1608 and 1609:
Inch Pouces NEEDLE FILE SET File se
Page 1610 and 1611:
TYPE 1 For Use with METAL, STAINLES
Page 1612 and 1613:
Wire Wheel Brushes Use on Angle Gri
Page 1614 and 1615:
Hammers Marteaux Ballpeen Hammer St
Page 1616 and 1617:
Hammers Marteaux Round Face Bumping
Page 1618 and 1619:
Body Shop Tools Outils pour atelier
Page 1620 and 1621:
Page 1622 and 1623:
Page 1624 and 1625:
® P reverse action joint rivet for
Page 1626 and 1627:
High Performance Plier for the Prof
Page 1628 and 1629:
Page 1630 and 1631:
Page 1632 and 1633:
Page 1634 and 1635:
Page 1636 and 1637:
Page 1638 and 1639:
Page 1640 and 1641:
Special Selection for the Electroni
Page 1642 and 1643:
Page 1644 and 1645:
Page 1646 and 1647:
Page 1648 and 1649:
ULLMAN DEVICES ® Magnet Pick-up To
Page 1650 and 1651:
ULLMAN DEVICES ® UTILITY PACKING H
Page 1652 and 1653:
ULLMAN DEVICES ® Inch Pouces MAGNE
Page 1654 and 1655:
Loctite ® Products Produits Loctit
Page 1656 and 1657:
Cyanoacrylate Adhesives Adhésifs d
Page 1658 and 1659:
CATALOG 13 Loctite offers a complet
Page 1660 and 1661:
Thread Sealing Scellage des filets
Page 1662 and 1663:
Threadlocking Blocage de filets CAT
Page 1664 and 1665:
Coatings Revêtements CATALOG 13 CO
Page 1666 and 1667:
CATALOG 13 Spaenaur Mfg. Product No
Page 1668 and 1669:
Page 1670 and 1671:
Page 1672 and 1673:
Flooring & Grout Couvre-sols & coul
Page 1674 and 1675:
Gasketing and Sealing Matériaux d'
Page 1676 and 1677:
CATALOG 13 Spaenaur Mfr. Temp. Prod
Page 1678 and 1679:
Wearing Compounds Composés d'usure
Page 1680 and 1681:
Cleaners Agents de nettoyage CLEANE
Page 1682 and 1683:
CATALOG 13 PRISM Surface Insensitiv
Page 1684 and 1685:
Comparative Charts Tableau de compa
Page 1686 and 1687:
Metric System of Measurements Syst
Page 1688 and 1689:
Torque Conversion Chart Tableau de
Page 1690 and 1691:
R Thread Size Comparison Chart Tabl
Page 1692 and 1693:
Inch Series Head Dimension Chart Di
Page 1694 and 1695:
TAPPING SCREWS Selector Guide Guide
Page 1696 and 1697:
R Approximate Hole Sizes in Sheet M
Page 1698 and 1699:
Corrosion Guide Guide de corrosion
Page 1700 and 1701:
Corrosion Guide Guide de corrosion
Page 1702 and 1703:
Plastics Properties Chart Tableau d
Page 1704 and 1705:
DIN/ISO Illustrated Index Index ill
Page 1706 and 1707:
Page 1708 and 1709:
Page 1710 and 1711:
Page 1712 and 1713:
Page 1714 and 1715:
Standard Terms and Conditions of Sa
Page 1716 and 1717:
APPLICATION FOR CREDIT FAX FORM TO
Page 1718 and 1719:
Version 1.5 April 2, 2015 RAMPA ©
Page 1720 and 1721:
Version 1.5 April 2, 2015 INSERTS L
Page 1722 and 1723:
Version 1.5 April 2, 2015 RAMPA-INS
Page 1724 and 1725:
Page 1726 and 1727:
Page 1728 and 1729:
Version 1.5 April 2, 2015 RAMPA-REP
Page 1730 and 1731:
Version 1.5 April 2, 2015 RAMPA-CON
Page 1732 and 1733:
Version 1.5 April 2, 2015 VX SELECT
Page 1734 and 1735:
Version 1.5 April 2, 2015 RAMPA-FLA
Page 1736 and 1737:
Version 1.5 April 2, 2015 CAP NUTS
Page 1738 and 1739:
Version 1.5 April 2, 2015 CROSS DOW
Page 1740 and 1741:
Version 1.5 April 2, 2015 TOOLS RAM
Page 1742 and 1743:
Version 1.5 April 2, 2015 RAMPA-ALL
Page 1744 and 1745:
Version 1.5 April 2, 2015 7 8 9 10
Page 1746 and 1747:
Version 1.5 April 2, 2015 ABOUT US
Page 1748 and 1749:
Inch Pouce U-Bolt with Nuts Low Car
Page 1750 and 1751:
RoHS Compliant and Legacy Part Numb
Page 1752 and 1753:
Page 1754 and 1755:
Page 1756 and 1757:
Page 1758 and 1759:
Page 1760 and 1761:
Page 1762 and 1763:
Page 1764 and 1765:
Page 1766 and 1767:
Page 1768 and 1769:
Page 1770 and 1771:
Page 1772 and 1773:
Page 1774 and 1775:
Page 1776 and 1777:
Page 1778 and 1779:
Page 1780 and 1781:
Page 1782 and 1783:
Page 1784 and 1785:
Page 1786 and 1787:
Page 1788 and 1789:
Page 1790 and 1791:
Page 1792 and 1793:
Page 1794 and 1795:
Page 1796 and 1797:
Page 1798 and 1799:
Page 1800 and 1801:
Page 1802 and 1803:
Page 1804 and 1805:
Page 1806 and 1807:
Page 1808 and 1809:
Page 1810 and 1811:
Page 1812 and 1813:
Page 1814 and 1815:
Page 1816 and 1817:
Page 1818 and 1819:
Page 1820 and 1821:
Page 1822 and 1823:
Page 1824 and 1825:
Page 1826 and 1827:
Page 1828 and 1829:
Page 1830 and 1831:
Page 1832 and 1833:
Page 1834 and 1835:
Page 1836 and 1837:
Page 1838 and 1839:
Page 1840 and 1841:
Page 1842 and 1843:
Page 1844 and 1845:
Page 1846 and 1847:
Page 1848 and 1849:
Page 1850 and 1851:
Page 1852 and 1853:
Page 1854 and 1855:
Page 1856 and 1857:
Page 1858 and 1859:
Page 1860 and 1861:
Page 1862 and 1863:
Page 1864 and 1865:
Page 1866 and 1867:
Page 1868 and 1869:
Page 1870 and 1871:
Page 1872 and 1873:
Page 1874 and 1875:
Page 1876 and 1877:
Page 1878 and 1879:
Page 1880 and 1881:
Page 1882 and 1883:
Page 1884 and 1885:
Page 1886 and 1887:
Page 1888 and 1889:
Page 1890 and 1891:
Page 1892 and 1893:
Page 1894 and 1895:
Page 1896 and 1897:
Page 1898 and 1899:
Page 1900 and 1901:
Page 1902 and 1903:
Page 1904 and 1905:
Page 1906 and 1907:
Page 1908 and 1909:
Page 1910 and 1911:
Page 1912 and 1913:
Page 1914 and 1915:
Page 1916 and 1917:
Page 1918 and 1919:
Page 1920 and 1921:
Page 1922 and 1923:
Page 1924 and 1925:
Page 1926 and 1927:
Page 1928 and 1929:
Page 1930 and 1931:
Page 1932 and 1933:
Page 1934 and 1935:
Page 1936 and 1937:
Page 1938 and 1939:
Page 1940 and 1941:
Page 1942 and 1943:
Page 1944 and 1945:
Page 1946 and 1947:
Page 1948 and 1949:
Page 1950 and 1951:
Page 1952 and 1953:
Page 1954 and 1955:
Page 1956 and 1957:
Page 1958 and 1959:
Page 1960 and 1961:
Page 1962 and 1963:
Page 1964 and 1965:
Page 1966 and 1967:
Page 1968 and 1969:
Page 1970 and 1971:
Page 1972 and 1973:
Page 1974 and 1975:
Page 1976 and 1977:
Page 1978 and 1979:
Page 1980 and 1981:
Page 1982 and 1983:
Page 1984 and 1985:
Page 1986 and 1987:
Page 1988 and 1989:
Page 1990 and 1991:
Page 1992 and 1993:
Page 1994 and 1995:
Page 1996 and 1997:
Page 1998 and 1999:
Page 2000 and 2001:
Page 2002 and 2003:
Page 2004 and 2005:
Page 2006 and 2007:
Page 2008 and 2009:
Page 2010 and 2011:
Page 2012 and 2013:
Page 2014 and 2015:
Page 2016 and 2017:
Page 2018 and 2019:
Page 2020 and 2021:
Inch Pouce cedar deck screws - squa
Page 2022 and 2023:
SAVE big over LOCTITE ® , with VIB
Page 2024:
~~ SPAENAUR Head Office & Main Dist
show all

Spaenaur

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?