Spaenaur

Inch and Metric
Pouces et Métrique
STEEL
C-1010 or C-1110
A-T
AVK Industrial Products
Produits Industriels «AVK»
INSERT
KNURLED THREADED INSERTS
FINISH: CAD PLATE PER QQ-P-416 TYPE 1 CLASS 3
C
OPEN END STYLE
INCH SERIES (All Dimensions in Inches)
SPAENAUR Thread Manufacturer's D HD L IL HOLE DEPTH Unit
No. Size No. Max. ±.005 ±.015 Max. Min. Pkg.
215-101 #4-40 ATS2-440 .1875 .211 .370 .205 .400 100
215-102▲ #6-32 ATS2-632 .2185 .240 .370 .205 .400 100
215-103*■ #8-32 ATS2-832 .2495 .269 .370 .205 .400 100
215-104 #10-24 ATS2-1024 .2805 .306 .370 .205 .400 100
215-105 #10-32 ATS2-1032 .2805 .306 .370 .205 .400 100
215-106 1/4-20 ATS2-420 .3745 .400 .515 .275 .540 100
215-107 1/4-28 ATS2-428 .3745 .400 .515 .275 .540 100
215-108 5/16-18 ATS2-518 .4995 .528 .615 .325 .640 50
215-109 5/16-24 ATS2-524 .4995 .528 .615 .325 .640 50
215-110 3/8-16 ATS2-616 .5615 .588 .745 .390 .770 50
215-111 3/8-24 ATS2-624 .5615 .588 .745 .390 .770 50
215-112 1/2-13 ATS2-813 .7485 .800 .935 .485 .960 50
215-113 1/2-20 ATS2-820 .7485 .800 .935 .485 .960 50
*215-800 304 Stainless Steel (U.P. Q. 50) ▲215-302 6061-T6 Aluminum, Cad. Pltd. ■ 215-303 6061-T6 Aluminum, Cad. Pltd.
CATALOG 13
(All Dimensions in Millimetres)
216-055• M3x0.5 ATS2-350 4.75 5.36 9.40 5.21 10.16 100
216-056 M4x0.7 ATS2-470 6.32 6.83 9.40 5.21 10.16 100
216-057† M5x0.8 ATS2-580 7.12 7.77 9.40 5.21 10.16 100
216-058 M6x1.0 ATS2-610 9.51 10.16 13.08 6.99 13.72 100
216-059 M8x1.25 ATS2-8125 12.69 13.41 15.62 8.26 16.26 100
216-060 M10x1.5 ATS2-1015 14.26 14.94 18.92 9.91 19.56 50
216-061 M12x1.75 ATS2-12175 19.01 20.32 23.75 12.32 24.38 50
• 216-800 304 Stainless Steel - U.P.Q. 50 †216-801 304 Stainless Steel - U.P.Q. 50
NOTE: 1. USE AVK RECOMMENDED TOOLING FOR SATISFACTORY INSTALLATIONS.
2. INTERNAL THREADS ARE MANUFACTURED OVERSIZE DUE TO THE MECHANICAL FUNCTION OF THE INSERTS AND ARE
NOT GAUGEABLE BEFORE OR AFTER INSTALLATION. HOWEVER, THEY ARE ALWAYS COMPATABLE WITH CLASS A2/A3 SCREWS.
HOLE SIZE
VS.
MATERIAL
THICKNESS
The proper hole size varies
with the thickness of the
parent material. Refer to the
hole size chart at right. We
recommend testing the
inserts before finalizing the
hole size. Standard hole
size tolerances are acceptable
but do not go below
nominal size.
METRIC SERIES ±0.13 ±0.38
MATERIAL THICK. .030-.090 .091-.124 .125-.186 .187 & OVER
THREAD SIZE Drill Decimal Drill Decimal Drill Decimal Drill Decimal
#4-40 3/16 .1875 #10 .1935 #10 .1935 #9 .1960
#6-32 7/32 .2188 #2 .2210 #1 .2280 #1 .2280
#8-32 1/4 .2500 “F” .2570 17/64 .2656 17/64 .2656
#10-24 9/32 .2812 “L” .2900 “L” .2900 19/64 .2969
#10-32 9/32 .2812 “L” .2900 “L” .2900 19/64 .2969
1/4-20 3/8 .3750 3/8 .3750 “W” .3860 25/64 .3906
1/4-28 3/8 .3750 3/8 .3750 “W” .3860 25/64 .3906
5/16-18 1/2 .5000 1/2 .5000 33/64 .5156 33/64 .5156
5/16-24 1/2 .5000 1/2 .5000 33/64 .5156 33/64 .5156
3/8-16 9/16 .5625 9/16 .5625 37/64 .5781 37/64 .5781
3/8-24 9/16 .5625 9/16 .5625 37/64 .5781 37/64 .5781
1/2-13 3/4 .7500 49/64 .7656 25/32 .7810 51/64 .7970
1/2-20 3/4 .7500 49/64 .7656 25/32 .7810 51/64 .7970
M3x0.5 3/16 .1875 #10 .1935 #10 .1935 #9 .1960
M4x0.7 1/4 .2500 “F” .2570 17/64 .2656 17/64 .2656
M5x0.8 9/32 .2812 “L” .2900 “L” .2900 19/64 .2969
M6x1.0 3/8 .3750 3/8 .3750 “W” .3860 25/64 .3906
M8x1.25 1/2 .5000 1/2 .5000 33/64 .5156 33/64 .5156
M10x1.5 9/16 .5625 9/16 .5625 37/64 .5781 37/64 .5781
M12x1.75 3/4 .7500 49/64 .7656 25/32 .7810 51/64 .7970
Tel: 1-800-265-8772 Fax: 519-744-0818
C181