Spaenaur

AVK Industrial Products
Produits Industriels «AVK»
Inch
Pouces
C
INSERT A-K KNURLED THREADED INSERTS
STEEL C-1010/C-1008
FINISH: Zinc/Yellow Dichromate per ASTM-B633 Type 2 FE/ZN
with Clear Protective Coating.
SPAENAUR Reserves the Option to Substitute Cad/Yellow Dichromate
per QQ-P-416 Type 2, Class 2 with Clear Protective Coating.
FEATURES:
• High torque-out values resists spinning due to cross-threading or overtightening.
• High pull-out values - very hard to pull out of thin material due to large “bubble”
on the backside.
• Blind installation - no access to backside required.
• Wide grip range - one length does the job of numerous other inserts.
• Nearly flush - no need to countersink or dimple due to very slight head protrusion.
• Installs after surface finish - tool will not mar parent material.
• Portable high speed tooling - put installation tool at any convenient location on
assembly line.
A multi purpose threaded insert with exceptionally strong torque-out and pull-out characteristics. Especially
effective in very thin, as well as, thick sheet metal in both blind and open applications. The axial knurl is first
forced into the parent material and then upset over the backside to engage the knurl into the parent material
providing very high resistance to spinning. The “bubble” of material over the backside provides very high pullout
loads.
Additional MATERIALS and FINISHES available
APPLICATION
ALUMINUM
5056
BRASS
270/260
MONEL
400
Clear Protective
Coating
Cad Plate per QQP 416
Type 1, Class 3
with Clear Protective
Coating
Clear Protective Coating
Also Available - CLOSED END INSERTS
To order A-K INSERTS
see facing page.
Priced Singly
A-K SERIES INSERTS
ASSORTMENT
805-663
ASSORTIMENT
Shipping Weight: 5.3 kg (11.6 lbs.)
A-L SERIES INSERTS
ASSORTMENT
ASSORTIMENT
805-664
Shipping Weight: 5.4 kg (11.8 lbs.)
Each Assortment also contains
10 Conversion Kits from 6-32
to 3/8-24 thread size.
Furnished in LARGE SIZE Steel drawer which
will fit into Slide Racks shown on page A3.
Both Assortments contain 16 sizes — 331 pieces,
the only difference being the Insert Series.
CONTENTS OF ASSORTMENTS Thread Size Grip Range Ass't.
A-K INSERTS A-L INSERTS In Inches In Inches Qty.
215-051 215-071 6-32 .020-.080 25
215-052 215-072 8-32 .020-.080 25
215-053 215-073 10-24 .020-.130 25
215-054 215-074 10-32 .020-.130 25
215-055 215-075 1/4-20 .027-.165 20
215-056 215-076 1-4-28 .027-.165 20
215-057 215-077 5/16-18 .027-.165 10
215-058 215-078 5/16-24 .027-.150 10
215-059 215-079 3/8-16 .027-.150 10
215-060 215-080 3/8-24 .027-.150 10
215-061 215-081 6-32 .080-.130 25
215-062 215-082 8-32 .080-.130 25
215-063 215-083 10-24 .130-.225 25
215-064 215-084 10-32 .130-.225 25
215-065 215-085 1/4-20 .165-.260 20
215-066 215-086 1/4-28 .165-.260 20
TAA170 TAA170 Installation Tool 1
CATALOG 13
C170
02 May 02