Spaenaur

Inch and Metric
Pouces et Métrique
A-H
SERIES
OPEN END
STYLE
INSERT
THREADED HEX INSERT
AVK Industrial Products
Produits Industriels «AVK»
STEEL C-1010/C-1008
FINISH: Zinc/Yellow Dichromate per ASTM-B633 Type 2 FE/ZN
with Clear Protective Coating.
SPAENAUR Reserves the Option to Substitute Cad/Yellow
Dichromate per QQ-P-416 Type 2, Class 2 with Clear Protective
Coating.
FEATURES:
• Exceptional resistance to spinning due to cross threading or overtightening.
Permits the use of “thread locking screws”.
• Blind installation - no access is needed to the backside.
• High quality finish resists corrosion.
• Installs before or after the parent material has been finished.
• Portable high speed tooling for use anywhere in the assembly line.
• Strong accurate internal rolled threads.
• Made in the USA.
C
The A-H Series Insert features a hexagonal body producing very high resistance to spinning when installed in a hex
hole. It will maintain a high resistance to spinning even when the attached part does not come in contact with the
insert. It is ideal for applications where SPC is being implemented. This blind threaded insert, like AVK’s other blind
threaded inserts, also features very high pull-out loads.
INCH SERIES (All Dimensions in Inches)
HD
SPAENAUR Thread Manufacturer’s Grip *Hole D ±.010 HH L IL Unit
No. Size No. Range Size A/F Max. ±.025† ± .003 ± .015 Max. Pkg.
215-124 #6-32 AHS4-632-80
.020-.080 .250 .249 .375 .027 .385 .295
100
215-125 #8-32 AHS4-832-80 100
215-126 #10-24 AHS4-1024-130 .020-.130 .281 .280 .390 .027 .435 .275 100
215-127 #10-32 AHS4-1032-130 100
215-128 1/4-20 AHS4-420-165 100
.027-.165 .375 .374 .510 .030 .585 .400
215-129 1/4-28 AHS4-428-165 100
215-130 5/16-18 AHS4-518-150 .027-.150 .685 .530 50
215-135 5/16-18 AHS4-518-312 .150-.312 .845 .515 50
215-131 5/16-24 AHS4-524-150 .500 .499 .655† .035 50
215-132 3/8-16 AHS4-616-150 .027-.150 .685 .530 50
215-133 3/8-24 AHS4-624-150 50
CATALOG 13
METRIC SERIES (All Dimensions in Millimetres)
±0.25
±0.64◆ ±0.08 ±0.38
216-066 M4 x 0.7 AHS4-470-2.0 .50-2.0 6.35 6.35 9.53 0.68 9.78 7.49 100
216-068 M6 x 1.0 AHS4-610-4.2 .70-4.2 9.53 9.50 12.96 0.76 14.86 10.16 100
216-069 M8 x 1.25 AHS4-8125-3.8 .70-3.8 12.70 12.70 16.64◆ 0.89 17.40 13.46 50
216-070 M10 x 1.50 AHS4-1015-3.8 .70-3.8 12.70 12.70 16.64◆ 0.89 17.40 13.46 50
NOTES: *HEX HOLE TOLERANCE +.004" to -.000" (+0.10 to -0.00 mm)
INCH SERIES THREADS ARE CLASS 2B.
METRIC SERIES THREADS ARE CLASS 6H.
INTERNAL THREAD LOCKING FEATURES AVAILABLE.
USE RECOMMENDED TOOLING FOR SATISFACTORY INSTALLATION.
The A-H SERIES INSERTS use the same tools as the A-K / A-L / AO SERIES INSERTS on pages C176-C179, C193.
See page C174 for
AVK Test Data.
Tel: 1-800-265-8772 Fax: 519-744-0818
C169
10 Apr 03