Spaenaur

Inch
Pouces
RED HEAD WEDGE ANCHORS
Hex Nut and Flat Washer
RED HEAD ® Wedge Anchors
Cales d'ancrage «RED HEAD ® »
HEAVY-DUTY
CONCRETE ANCHORS
CATALOG 13
CARBON STEEL - Zinc Plated
DESCRIPTION MAX. MIN. 4000 PSI CONCRETE Installation
MATERIAL
SPAENAUR DRILL OVERALL Approx.
EMBED- PULLOUT* SHEAR*
†
THICKNESS
Torque
No. SIZE LENGTH THRD. LGTH (to be fastened) MENT (LBS.) (LBS.) (Ft. Lbs.)
102-276 1/4" 1-3/4" 3/4" 3/8"
102-277 1/4" 2-1/4" 1-1/4" 7/8" 1-1/8" 1780 1400 8
102-278 1/4" 3-1/4" 2-1/4" 1-7/8"
102-279 3/8" 2-1/4" 1-1/8" 3/8"
102-280 3/8" 2-3/4" 1-5/8" 7/8"
102-281 3/8" 3" 1-3/4" 1-1/8" 1-1/2" 2240 2620 25
102-282 3/8" 3-3/4" 2-1/2" 1-7/8"
102-283 3/8" 5" 3-3/4" 3-1/8"
102-284 1/2" 2-3/4" 1-1/4" 1/8"
102-285 1/2" 3-3/4" 2-1/4" 1"
102-286 1/2" 4-1/4" 2-3/4" 1-1/2" 2-1/4" 5100 4760 55
102-287 1/2" 5-1/2" 3" 2-3/4"
102-288 1/2" 7" 4-1/2" 4-1/4"
102-289 5/8" 3-1/2" 1-3/4" 1/8"
102-290 5/8" 4-1/4" 2-1/2" 1"
102-291 5/8" 5" 3-1/4" 1-5/8"
102-292 5/8" 6" 4-1/4" 2-5/8" 2-3/4" 7180 7120 90
102-293 5/8" 7" 5-1/4" 3-5/8"
102-294 5/8" 8-1/2" 5-3/4" 5-1/8"
102-295 3/4" 4-1/4" 1-3/4" 1/4"
102-296 3/4" 4-3/4" 2-1/4" 3/4"
102-297 3/4" 5-1/2" 3" 1-1/2"
102-298 3/4" 6-1/4" 3-3/4" 2-1/4" 3-1/4" 10840 13720 175
102-299 3/4" 7" 4-1/2" 3"
102-300 3/4" 8-1/2" 5-3/4" 4-1/2"
102-301 3/4" 10" 5-3/4" 6"
102-302 1" 6" 2-1/2" 1/2"
102-303 1" 9" 2-1/2" 3-1/2"
4-1/2" 20180 22820 300
Carbon steel anchor expansion clips are made of Type 18-8 Stainless Steel.
304 STAINLESS STEEL
(See Note)
DESCRIPTION MAX. MIN. 4000 PSI CONCRETE Installation
SPAENAUR DRILL OVERALL Approx. MATERIAL EMBED- PULLOUT* SHEAR*
†
THICKNESS
Torque
No. SIZE LENGTH THRD. LGTH. (to be fastened) MENT (LBS.) (LBS.) (Ft. Lbs.)
102-805 1/4" 2-1/4" 1-1/4" 7/8" 1-1/8" 1780 1400 8
102-806 3/8" 2-3/4" 1-5/8" 7/8"
102-807 3/8" 3-3/4" 2-1/2" 1-1/8" 1-1/2" 2240 2620 25
102-808 3/8" 5" 3-3/4" 1-7/8"
102-809 1/2" 2-3/4" 1-1/4" 7/8"
102-810 1/2" 4-1/4" 2-3/4" 1-1/8" 2-1/4" 5100 4760 55
102-811 1/2" 7" 4-1/2" 4-1/4"
102-812 5/8" 5" 3-1/4" 1-5/8"
102-813 5/8" 7" 5-1/2" 3-5/8"
2-3/4" 1780 7120 90
† Drill Size is same as Anchor Thread Size - UNC.
*Ultimate load capacity in 4,000 PSI stone aggregate concrete. Ultimate pullout and
shear loads are indicated for the depth of embedment in concrete shown in the
“Minimum Embedment” column.
Safe working loads for single installations under static loading should not exceed 25%
of the ultimate load capacity.
For extreme low temperature applications, use stainless steel anchors.
Comes complete with washers and nuts.
Red Head’s Wedge Anchor is easy to
use. Anchor bolt, carbide bit and hole
size are all the same. Heavy-duty and
versatile, the Wedge Anchor is nonbottom
bearing, so precise hole depth
or clean-out is not always required. A
one-piece stainless steel expanding clip
assures full expansion for rugged, dependable
holding strength.
APPLICATIONS:
Structural applications of all types. Ideal
for fastening electrical, heating, ventilating,
air conditioning and plumbing
systems to concrete. Other applications
include tilt-up construction, pipe
hanging, in-plant machinery mountings,
storage racks, warehouse equipment,
highway rails, posts and guard apparatus.
Numerous distinct applications for
stainless steel models.
VARIATIONS:
Zinc-plated Carbon Steel - Standard
anchor for all structural, in-plant and
highway uses indicated in the Applications
section. Zinc-plated in accordance
with Federal specifications QQ-
Z-325C, Type II, Class 3.
304 Stainless Steel - For protection in
humid, highly corrosive and acidic environments.
Used extensively in architecture
to mount aluminum and stainless
steel window frames and curtain
walls.
Bolt Body - Type 304 Stainless Steel
Nut, Washer and Expansion Clip -
Type 18-8 Stainless Steel.
APPROVALS:
Meets or exceeds U.S. Government
G.S.A. Specifications FF-S-325
Group II, Type 4 Class I.
Underwriters Laboratories
Factory Mutual
Note: Other Sizes in 304 S.S. are
available, also 316 S.S. available in
some sizes.
®
A Registered Trade Mark of ITW Canada Inc.
C
For Unit Package Quantity see Price List.
Tel: 1-800-265-8772 Fax: 519-744-0818
C157
24 Nov 03