Spaenaur

C
RED HEAD ® Sleeve Anchors
Manchons d'ancrage «RED HEAD ® »
MEDIUM-DUTY CONCRETE
AND MASONRY ANCHORS
Comes complete with washers and nuts.
The Sleeve Anchor - Red Head’s most
versatile, medium-duty expansion anchor.
● Versatile application
● Head styles for every application
● Pre-assembled for easy installation
● Anchor can be installed through object to be
fastened
● Six-rib sleeve design assures holding power
of expansion device
● Filler sleeve eliminates galling between
red sleeve and tapered bolt head
APPLICATIONS:
Sleeve expansion device allows anchor to
be used in cement block, thin wall or solid
concrete, brick or stone. Flat head
variations are particularly useful for
anchoring door and window frames and
other architectural material. Excellent for
anchoring electrical systems, transformers,
cable trays, radiant heating units, and
partitions, as well as cabinets, shelves,
wood sleepers, duct straps, theatre seats,
fire extinguishers, and tying wire.
ACORN
NUT
HEX
NUT
FLAT
HEAD
HEAD TYPES
THRE-
SHOLD
FLAT
HEAD
ROUND
HEAD
TIE
WIRE
304 STAINLESS STEEL
SLEEVE ANCHORS
Caustic and high-humidity environments can
literally eat up carbon steel anchors,
weakening them, and shortening service life.
Once started, corrosion infects adjoining
materials and causes contamination
problems in such applications as the chemical
and food industries.
When you specify Red Head stainless steel
anchors for use in caustic environments, you
are likely to prevent a lot of future maintenance
problems in any corrosive environment.
Type 304 Stainless Steel Materials:
Anchor bolt - Type 304 stainless
Expansion and filler sleeves - Type 302 stainless
Also available in Hex Nut Style 1/4"-5/8" Dia.
316 Stainless Steel available as special order.
®
A Registered Trade Mark of ITW Canada Inc.
Hex Nut Head
Illustrated
EFFECTIVE MAX. Unit
HEAD SPAENAUR DRILL ANCHOR MATERIAL PULLOUT* SHEAR* Pkg.
TYPE No. SIZE ▲LENGTH THICKNESS (LBS.) (LBS.) Qty.
Acorn 102-250 1/4" 1-3/8" 1/4" 50
Tapped
2100 1620
Through 102-251 1/4" 2-1/4" 1-1/8"
50
102-252 5/16" 1-1/2" 1/4" 50
2600 2400
102-253 5/16" 2-1/2" 1-1/4"
50
102-254 3/8" 1-7/8" 3/8"
3100 3040
50
Hex
Nut
Head
Flat
Head
Slot or
Phillips
Drive
(our
option)
102-255 3/8" 3" 1-1/2"
50
102-256 1/2" 2-1/4" 3/8" 25
102-257 1/2" 3" 1-1/8" 4400 5000 25
102-258 1/2" 4" 2-1/8" 25
102-259 5/8" 2-1/4" 1/4" 25
102-260 5/8" 3" 1" 25
102-261 5/8" 4-1/4" 2-1/4"
6120 8080
10
102-262 5/8" 6" 4" 10
102-263 3/4" 4" 1-3/4" 5
8090 13100
102-264 3/4" 6-1/4" 4"
5
102-265 1/4" 1-3/8" 1/4" 50
102-266 1/4" 2-1/4" 1-1/8" 50
2100 1620
102-267 1/4" 3-1/8" 2"
50
102-268 1/4" 4" 2-7/8" 50
102-270 3/8" 2-7/8" 1-3/8" 50
102-271 3/8" 4" 2-1/2" 50
3100 3040
102-272 3/8" 5" 3-1/2"
50
102-273 3/8" 6" 4-1/2" 50
FHT 102-274 1/4" 2-1/4" 1-1/8" 2100 1620 50
TW 102-275 5/16" 1-1/2" 9/32" Eye 2000 500 50
FHT = Flat Head Threshold
(Head #10-3/8" Dia.)
TW = Tie Wire
304 STAINLESS STEEL
EFFECTIVE MAX. Unit
SPAENAUR DRILL ANCHOR MATERIAL PULLOUT* SHEAR* Pkg.
HEAD No. SIZE ▲LENGTH THICKNESS (LBS.) (LBS.) Qty.
Flat
Slot or
Phillips Dr.
(our option)
RED HEAD SLEEVE ANCHORS
CARBON STEEL - Zinc Plated
102-800 1/4" 2-1/4" 1-1/8" 1613 1751 10
102-802 3/8" 2-7/8" 1-1/2" 2597 2872 5
102-803 3/8" 4" 2-3/4" 2597 2872 5
Round 102-804 1/4" 2" 7/8" 1613 1751 10
*Ultimate load capacity in 4000 PSI
concrete. Capacities are for carbon steel
versions only.
Safe working loads for single installations
under static loading should not exceed
25% of the ultimate load capacity.
Inch
Pouces
THREAD
DRILL SIZE
SIZE UNC
1/4" 3/16"
5/16" 1/4"
3/8" 5/16"
1/2" 3/8"
5/8" 1/2"
3/4" 5/8"
CATALOG 13
C156
21 Nov 03
See page C158 for
Sleeve Anchor Assortment.