Spaenaur

Inch
Pouces
Screw Anchors (Winged)
For use in hollow walls. (Can also be used in solid walls.)
Screw and Nailin Anchors
Tampons «Nailin» et Tampons Vis
The screw anchor is made of tough, impervious polypropylene, and, when used with a
stainless steel screw, becomes a corrosion-proof fastening. It will take any sheet metal screw
from #8 to #10.
When you tighten the screw, the wings of the screw anchor form two reverse angles that won’t give, wiggle, or pull out.
When you remove the screw, the screw anchor stays in place for re-use. It's the simplest, most rugged, most versatile
and fastest anchor you can use in hollow walls—and it’s economical too.
C
INSTALLS 1-2-3 Just drill a 5/16"
hole. Squeeze the screw
anchor flat, and push into hole.
Tap flush with wall.
Put the fixture in place, insert the
screw, and tighten until it feels
secure.
SPAENAUR Anchor Wall Drill Unit
No. Size Thickness Diameter Package
058-010 Mini 1/8" 5/16" 100
058-007 Short 3/8" 5/16" 100
058-008 Medium 1/2" 5/16" 100
058-009 Long 5/8" 5/16" 100
ANCHOR REQUIRED WORK MINIMUM
SIZE SCREW LENGTH THICKNESS SCREW LENGTH
MINI 1-1/8"
SHORT 1-1/4"
MEDIUM 1-3/8"
LONG 1-1/2"
Hollow Wall Application Chart
+ =
+ =
+ =
+ =
+ =
ZINC ALLOY NAILIN ANCHORS
Steel Nail
Zinc Plated
Unit
Package
100
P.C. 102
Head Shoul- Ex- Work Weight
SPAENAUR Drill Head Thick- der pansion Overall Thick- Lbs. Per Holding Power
No. Size Size & Dia. Dia. ness Length Length Length ness 1000 Lbs. Concrete
EX-2802 3/16" x 7/8" (3/16") 13/32" 1/8" 1/4" 5/8" 1" 0-1/4" 4-3/4 400
EX-2808 1/4" x 1" #12 (1/4") 1/2" 1/8" 1/4" 3/4" 1-1/8" 0-1/4" 18 820
EX-2814 1/4" x 1-1/4" #12 (1/4") 9/16" 1/8" 1/2" 3/4" 1-5/8" 1/4" x 1/2" 22-1/2 960
EX-2820 1/4" x 1-1/2" #12 (1/4") 9/16" 1/8" 3/4" 3/4" 1-7/8" 1/2" x 3/4" 25-1/2 1150
CATALOG 13
For Steel Toggle Nuts see page C160.
Visit us on the web at . . .
www.spaenaur.com
Tel: 1-800-265-8772 Fax: 519-744-0818
C149
23 July 02