Spaenaur

B
Drop Forged Eye Bolts
Boulons à oeil matricé
SHOULDER TYPE
E
B318
09 Sep 03
EYE BOLTS
D
C
A
SHANKS FULL THREADED
TO WITHIN 1/8" - 3/8"
OF SHOULDER.
B
Class 2A (UNC-2A)
(COARSE THREAD)
WARNING:
APPLIES TO
EYE BOLTS & EYE NUTS
Safe working load is drastically
reduced when loading at an angle.
Loading must never be made at an
angle greater than 45° from bolt or
nut centreline.
Note:
Plane of the Eye
F
FORGED / 1030 STEEL / HEAT TREATED
Self-Coloured
(In Inches) (D) (F)
(A) (B) (C) Nom (E) Centre Unit
SPAENAUR Thread Shank Eye Eye Overall Of Eye To Pkg.
No. Size Length I.D. O.D. Length Shoulder Qty.
EYB-3 1/4-20 1.00 0.50 0.94 2.20 0.70 10
EYB-4 1/4-20 1.00-1.06 0.69-0.81 1.19 2.22-2.53 0.69-0.81 10
EYB-5 5/16-18 1.125 .625 1.19 2.50 0.875 10
EYB-6 5/16-18 1.12-1.19 0.81-0.94 1.44 2.66-2.97 0.88-1.00 10
EYB-7 3/8-16 0.75 1.00 1.69 2.81 1.20 10
EYB-8 3/8-16 1.25 0.75 1.44 2.97 1.00 10
EYB-9 3/8-16 1.25-1.38 0.94-1.06 1.69 3.09-3.47 1.06-1.19 10
EYB-10 7/16-14 1.38-1.50 1.00-1.12 1.81 3.41-3.78 1.19-1.31 10
EYB-11 1/2-13 1.50 1.00 1.94 3.75 1.28 5
EYB-12 1/2-13 1.50-1.62 1.12-1.25 2.12 3.81-4.19 1.31-1.44 5
EYB-13 9/16-12 1.75-1.88 1.31-1.44 2.56 4.56-4.94 1.59-1.72 5
EYB-14 5/8-11 1.75-1.88 1.31-1.44 2.56 4.56-4.94 1.59-1.72 5
EYB-15 3/4-10 2.00-2.12 1.44-1.56 2.81 5.06-5.50 1.72-1.91 5
EYB-16 7/8-9 2.25-2.38 1.56-1.69 3.19 5.75-6.19 2.03-2.22 1
EYB-17 1-8 2.50-2.62 1.69-1.81 3.56 6.44-6.88 2.22-2.41 1
EYB-18 1-1/8-7 2.75-2.88 1.94-2.06 4.06 7.31-7.75 2.59-2.78 1
EYB-19 1-1/4-7 3.00-3.12 2.12-2.25 4.44 8.00-8.44 2.84-3.03 1
EYB-20 1-1/2-6 3.50-3.62 2.44-2.56 5.19 9.22-9.72 3.19-3.44 1
EYB-40 1-3/4-5 3.75-3.88 2.75-3.00 6.00 10.50-11.12 3.88-4.12 1
EYB-41 2-4-1/2 4.00-4.12 3.06-3.44 6.88 11.53-12.22 4.25-4.50 1
-Special Stock Sizes -
024-044= 1/4-20 2.00 0.50 0.94 3.19 0.75 10
024-022● 1/2-13 6.00 1.00 1.938 8.00 1.25 5
024-002† 1/2" dia. 3.25 1.00 1.88 5.19 — 5
EYB-22* 1/2" dia. 6.00 1.00 1.88 8.31 1.38 5
EYB-21* 5/8" dia. 1.63 1.41 2.50 4.63 1.70 5
Self-coloured finish except:
= No. 024-044 Hot Galvanized
Finish. 1" Thread Length.
• Hot Galvanized Finish.
2" Thread Length.
Plain Pattern (Straight Shank) Eyebolt
Showing Rated Capacity in lbs. at 0° (for ref. only)
Rated Cap.
Nominal
Size
in lbs.
0 degrees
1/4 400
5/16 680
3/8 1,000
7/16 1,380
1/2 1,840
9/16 2,370
5/8 2,940
3/4 4,340
7/8 6,000
1 7,880
1-1/8 9,920
1-1/4 12,600
1-1/2 18,260
1-3/4 24,700
2 32,500
2-1/2 52,000
† 024-002 Unthreaded &
No Shoulder
* No. EYB-21 & EYB-22
Unthreaded
Inch
Pouce
Shoulder Pattern Eyebolt
Showing Rated Capacity in lbs. at 0° and 45°
(for ref. only)
Nominal Rated Capacity in lbs.
Size 0 degrees 45 degrees
1/4 400 NR
5/16 680 NR
3/8 1,000 220
7/16 1,380 330
1/2 1,840 520
9/16 2,370 700
5/8 2,940 890
3/4 4,340 1,310
7/8 6,000 1,910
1 7,880 2,630
1-1/8 9,920 3,840
1-1/4 12,600 4,125
1-1/2 18,260 6,040
1-3/4 24,700 8,250
2 32,500 10,910
NR - no rating
All Eye Bolts and Eye Nuts, whether in blanks or fully machined, as shown on pages B318 to B320, are covered by
our standard warranty. The warranty becomes VOID whenever modifications are made or further machining is done
by the buyer, also in cases where these items are subject to an angular lift or pull.
CATALOG 13