Spaenaur

B
Torx ® Tamper-Resistant Screws
Vis antivols Torx ®
TORX TAMPER-RESISTANT
BUTTON HEAD
Type F
Case-Hardened
STEEL
Zinc Plated
THREAD-CUTTING
SCREWS
Also suitable for use as machine
screws in pre-threaded holes.
Inch
Pouces
SPAENAUR Type F Head Torx Unit
Recess
No. Screw Size Style Size Pkg.
381-201 8-32 x 3/4" 100
381-202 8-32 x 1" TR15 100
381-206 10-24 x 3/8" Button
100
381-207 10-24 x 5/8"
Head
100
381-208 10-24 x 1" TR25 100
TORX
381-204 10-32 x 1/2" 100
381-205 10-32 x 3/4" Tamper-
100
381-209 1/4"-20 x 3/4" Resistant
100
381-210 1/4"-20 x 1" TR27 100
381-211 1/4"-20 x 1-1/2" 100
TORX ® TAMPER-RESISTANT BITS and DRIVERS for Recessed Tamper-Resistant Screws
The tamper-resistant TORX drive has a post in the centre of its recess which requires a specially mated
driver to remove the fastener. Unauthorized removal is prevented.
Torx
Recess
Size
SPAENAUR NUMBERS LISTED BELOW
HAND DRIVER *INSERT BIT KEY WRENCH
Approx. with integral Bit 1/4" Hex - 1" long Short Arm drilled both ends
O/A Lgth. and plastic handle ▲5/16" Hex - 1-1/4" long Alloy Steel
TR7 5-7/8" 876-1704 — —
TR8 5-7/8" 876-1705 876-890 —
TR9 5-7/8" 876-1706 876-891 —
TR10 5-7/8" 876-1707 876-348 876-1785
TR15 6-7/8" 876-345 876-349 876-1786
TR20 6-7/8" 876-1708 876-823 876-1787
TR25 7-3/4" 876-346 876-350 876-1788
TR27 8" 876-347 876-351 876-1789
TR30 8-1/2" 876-1709 876-892 876-1790
TR40 8-1/2" 876-1710 876-893 876-1791
TR45 8-1/2" 876-1711 ▲876-1792 —
TR50 8-1/2" — ▲876-1793 —
*Not for use with power driver.
See pages B132 and
B133 for screws.
(Hollow handle
for storing bits.)
NOTE: SPANNER and TORX "Tamper Resistant"
tools, are NOT guaranteed against overtorque,
misuse, breakage or wear.
All Bits and Tools
Priced Singly.
Spaenaur
(Bits not included.)
No. Magnetic Driver Handles
876-129 for 1/4" hex bits shown in chart.
876-130 for 5/16" hex bits shown in chart.
Visit us on the web at . . .
www.spaenaur.com
CATALOG 13
B134
19 May 04