Spaenaur

Version 1.5 April 2, 2015
RAMPA-INSERTS TYPE B (TYPES: IB, SCREW IN)
STEEL ZINC PLATED AND PLAIN STEEL
Inch and Metric/Pouces et Metrique
These are manufactured to DIN 7965 and are slotted with a full internal thread for easy automatic insertion.
RAMPA-INSERTS TYPE B
Internal Thread
Size (d)
O.D. (D) Length (L) Finish PKG. QTY. SPAENAUR #
1/4-20 12 mm 12 mm Zinc 50 625-A20-2T
1/4-20 12 mm 10 mm Zinc 50 625-A53-2Y
1/4-20 12 mm 15 mm Zinc 50 625-A54-2C
3/8-16 18.5 mm 18 mm Zinc 25 625-A56-2T
3/8-16 18.5 mm 25 mm Zinc 25 625-A57-2K
5/16-18 14 mm 15 mm Zinc 50 625-A21-2K
5/16-18 14 mm 18 mm Zinc 50 625-A55-2N
8-32 8 mm 8 mm Zinc 50 625-A51-2A
10-24 10 mm 12 mm Zinc 50 625-A52-2P
M4 8 mm 8 mm Zinc 50 625-A46-1W
M5 10 mm 12 mm Zinc 50 625-A47-1M
M6 12 mm 10 mm Zinc 50 625-A48-1X
M6 12 mm 12 mm Zinc 50 625-A17-1N
M6 12 mm 15 mm Zinc 50 625-A18-1T
M8 14 mm 15 mm Zinc 50 625-A19-1K
M8 14 mm 18 mm Zinc 50 625-A49-1A
M10 18.5 mm 15 mm Zinc 25 625-A50-1X
RAMPA-INSERTS TYPE BL
STEEL ZINC PLATED
Metric/Metrique
Suitable for heavy duty applications. Featuring a threaded blind hole, they are not slotted and a type 515 driver is
recommended for installation. With tap on end for heavy duty applications, and use with viscous materials.
RAMPA-INSERTS TYPE BL
Internal Thread
Overall Length Internal Thread
O.D. (D)
Size (d)
(L)
Length (L1)
PKG. QTY. SPAENAUR #
M12 22 mm 60 mm 24 mm 5 625-A58-1W
M12 22 mm 80 mm 24 mm 5 *625-A59-1M
M12 22 mm 100 mm 24 mm 5 *625-A60-1W
M16 25 mm 60 mm 24 mm 5 625-A61-1M
M16 25 mm 80 mm 24 mm 5 *625-A62-1X
M16 25 mm 100 mm 24 mm 5 *625-A63-1A
* Indicates product meets European Technical Approval No. ETA-12/0481 certification for holding strength
For insert tools see pages 23 - 25
Refer to the RAMPA Pre-bore Reference Chart at the end of this document.
www.spaenaur.com • service@spaenaur.com • Tel: 1-800-265-8772 • Tel: 519-744-3521 • Fax: 519-744-0818
5