Spaenaur

Hand or Machine Taps
Taraud à la main ou mécanique
Metric
Métrique
STRAIGHT FLUTE
METRIC TAPS
ISO 529
METRIC COARSE THREAD
RIGHT HAND
CARBON STEEL
Straight Flute Taps are available single or in sets.
No. 1 STARTING TAP
No. 2 MIDDLE TAP
No. 3 FINISHING TAP
Note: Taps No. 1, No. 2 & No. 3 are commonly referred to as
TAPER, PLUG & BOTTOMING TAPS.
Nominal Tap Recommended #1 #2 #3 Set of 3
DIA. PITCH Square End DRILL Starting Tap Middle Tap Finishing Tap Taps
mm mm A/F mm mm SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No.
M2.3 0.4 2.24 1.9 — 874-1412 — 874-1433
M3 0.5 2.5 2.5 — — — —
M3.5 0.6 2.8 2.9 874-1399 874-1414 — —
M4.5 0.75 3.55 3.75 874-1401 — 874-1426 874-1436
M7 1.0 5.6 6 — 874-1417 874-1427 —
M9 1.25 7.1 7.75 874-1405 874-1418 874-1428 —
M18 2.5 11.2 15.5 — — — 874-1443
M33 3.5 18 29.5 — — — 874-1448
STRAIGHT FLUTE TAPS - RIGHT HAND
METRIC FINE THREAD
CARBON STEEL
P
Nominal Tap Recommended #1 #2 #3 Set of 2
DIA. PITCH Square End DRILL Starting Tap Middle Tap Finishing Tap Taps
mm mm A/F mm mm SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No.
M9 1.0 7.1 8 874-1450 — 874-1454 —
M24 1.5 14 22.5 — — — 874-1456
All Taps Priced Singly.
CATALOG 13
P88
24 Feb 04