Spaenaur

Chain & Accessories
Chaîne et accessoires
Inch
Pouces
Grade 30 Chain Low Carbon Steel
Design Factor 4:1
Approximate
Spaenaur WLL Unit Pkg. Weight (lbs.)
No. Trade Size (lbs.) Quantity Per Foot
121-720 1/8" 375 1000' 0.19
121-721 3/16" 590 750' 0.30
121-722 1/4" 1,040 350' 0.52
Grade 70 Transport Chain
Boron Manganese Heat Treated Steel
Never exceed
working load limit
of chain!
Minimum
Spaenaur WLL Unit Pkg. Weight (lbs.)
No. Trade Size (lbs.) Quantity Per Foot
121-723 5/16" 4,700 275' 0.93
121-724 3/8" 6,600 200' 1.42
M
Grade 30 & Grade 70 Chains Must Not Be Used For Overhead.
Standard Lever Load Binder
• Forged Steel - quench and tempered. • Ball and socket swivel
joints at hook assemblies permit a straight line pull. • Do not
operate load binder while you or anyone else is standing on the
load. • Tighten handle in a downward manner. • Do not use handle
extension for tightening. • Secure position of binder by wrapping the
loose end of chain around the handle and tighten chain. • Always
stay “clear” of the handle as it could snap back. • Do not close your
hand around the handle. • Inspect binder prior to use and discard in
case of signs of wear.
Weight
Dimensions (Inches)
Spaenaur Chain Each Take WLL NBS
No. Size (lbs.) A B C D E F G Up (lbs.) (lbs.)
121-725 5/16 - 3/8" 7.00 24.13 22.13 17.88 16.00 10.38 10.38 0.05 4.25 5,400 19,000
Lever Load Binder 121-743 same as above except recoilless type.
Warning: Never exceed working load limit! Failure to follow instructions can result in serious injury!
Chain & Bolt Cutter
Cutting Capacity:
1/2" for Grade 30 Chain
3/8" for Grade 70 Chain
Length: 42"
Weight: 18-20 lbs.
Blade Material:
Alloy Steel, Satin Finish.
Adjustable Blade Clearance.
Suitable For Mild Steels Only!
Spaenaur No.
876-300
CATALOG 13
These tools are sharp and should be used with caution! Using them beyond the
stated capacity or on other products will damage the blades and the tool!
M74-1
See following page for chain accessories