Spaenaur

General Purpose Latches
Cliquets pour bessoins général
Swell Action Latches
Light Duty Version
• Accommodates misalignment
between door and frame
• Latches in any frame thickness,
blind application, glass, plastic or
metal
• Resists vibration
• Sound deadening
R 2.4 (.09)
DOOR
Material and Finish
HANDLE, WASHER and ACORN
NUT: Nylon, black.
TEE SHAFT: Glass filled nylon,
black.
BUSHING: SBR Rubber, black.
FRAME
RATED AND
ULTIMATE LOAD
ACORN NUT
M6 THREAD
39
(1.53)
;;;
;;;
;;;
;;;
;;;
16.7
(.66)
HANDLE/TEE
SHAFT SUB-
ASSEMBLY
11.5 (.45)
39 (1.53)
1.5 (.06) TO 4.8 (.19)
BUSHING
23 (.91) OPEN
L
Use Adjustment
Door Thickness Washer? Required?
1.7±0.2 (.07±.01) Yes No
1.9 to 2.3 (.08 to .09) Yes Yes
2.5±0.2 (.10±.01) No No
2.7 to 4.8 (.11 to .19) No Yes
SPAENAUR No.
097-408
Mfr. #19-54-01
Priced Singly
Panel Preparation
OPTIONAL RECESSED DOOR PREPARATION:
11.5±0.5 (.45±.02) DEEP
18±0.5
(.71±.02)
56±0.5
(2.20±.02)
3.4±0.5
R TYP.
(.13±.02)
5.2±0.5
(.20±.02)
Ø13.7±0.3 (.54±.01) for frame
thickness up to 3.2 (.13)
Ø14.1±0.3 (.56±.01) for frame
thickness 3.2 (.13) to 4.8 (.19)
Ø 6.7±0.3
(.26±.01)
millimeter (inch)
Dimensions without
tolerances are for reference
only.
DOOR
OPTIONAL FLATS
+0.1 +.004
5.2 -0.0 (.205 -.000 )
Installation
1. Prepare hole in door as shown. Optional flats in door preparation will
prevent latch rotation.
2. Prepare hole frame as shown.
3. With handle in open (unlatched) position, insert tee shaft through
door, then slide washer (if required) over the tee shaft.
4. Slide bushing over tee shaft and secure with acorn nut. For “No
Adjustment” door thickness, run nut until fully seated on tee shaft
[0.5 N•m (4.5 in.lbs.) Max. Torque]. For other door thickness, adjust
nut for satisfactory latching action.
FRAME
5. Check the free expanded
diameter of bushing. When
latched, but not engaged in
frame, bushing diameter
should be 15.5 (.61) minimum
to 16.5 (.65) maximum.
;;;;;
;;;;;
;;;;;
ACORN NUT
HANDLE AND SHAFT
SUB-ASSEMBLY
BUSHING
USE WASHER
PROVIDED
WHEN
REQUIRED
CATALOG 13
L170
02 Oct 01