Spaenaur

Swell Latches
Heavy Duty Version
• Accommodates misalignment
between door and frame
• Latches in any frame thickness,
blind application, glass or plastic
• Resists vibration
Material and Finish
HANDLE: Die cast zinc, black powder coated.
SHAFT: Brass, black organic coating.
PIN: 303 Stainless steel, passivated with black oxide coating.
NUT: Nylon, black.
WASHER: Acetal, black.
BUSHING: SBR rubber, black.
General Purpose Latches
Cliquets pour bessoins général
Ø 19
(.75)
16
(.63)
HANDLE AND SHAFT
SUB-ASSEMBLY
6.4 (.25) MAX
DOOR OR OUTER PANEL
WASHER
Frame
Thickness
FRAME
BUSHING
NUT
SHAFT
5/16-24 Thread
57
(2.25)
55
(2.16)
SPAENAUR No.
097-410
Mfr. #19-14-10
Priced Singly
13 (.50)
63 (2.48)
(OPEN)
Installation
1. Prepare shaped hole in door or outer panel and
round hole in frame.
DOOR OR
OUTER PANEL
Ø 8 +0.1
-0.0
+.004
(.316 )
- .000
FRAME
28 (1.10)
(LATCHED)
1.2 (.05)
29.3 (1.15)
(LATCHED)
33.6 (1.32)
(OPEN)
Product Strength Guidelines
Frame Thickness Rated Load* (Short Term)
1.2 to 3.2 (.05 to .13) 330 N (75 lbs.)
3.2 to 4.8 (.13 to .19) 660 N (150 lbs.)
4.8 to 6.4 (.19 to .25) 550 N (125 lbs.)
6.4 (.25) and Up 220 N (50 lbs.)
2. With handle in open position insert shaft through washer
then hole in door. Pass bushing over shaft and secure
with nylon nut.
NYLON NUT
WASHER
*Latches should not be loaded continuously at
values near to the short term rated load.
BUSHING
L
6.5 +0.1
-0.0
+.004
- .000
(.257 )
Ø K
OPTIONAL: Round hole
installation. CAUTION!! Handle orientation
will shift with use and loosen.
HANDLE AND SHAFT
SUB-ASSEMBLY
CATALOG 13
Frame Thickness
Ø K
( )
+0.5
-0.0 +.031
-.000
1.2 to 3.2 (.05 to .13) 19 (.750)
3.2 to 4.8 (.13 to .19) 19.5 (.766)
4.8 to 6.4 (.19 to .25) 20 (.781)
6.4 (.25) and Up 20.5 (.797)
MAX. misalignment
between LC ’s of panel
hole and frame hole.
0.9 (.035)
1.1 (.045)
1.3 (.050)
1.5 (.060)
3. Adjust nylon nut to provide adequate expansion of the
bushing when the handle is lowered.
millimeter (inch)
Dimensions without tolerances are for
reference only.
Latch should not be operated at temperatures below 0°C (32°F).
Tel: 1-800-265-8772 Fax: 519-744-0818
L169