Spaenaur

Draw Latches
Cliquets d'attelage
Flexible Draw Latches
T-Handle Style
with Stainless Steel Hardware
071 Series
SPAENAUR No.
097-814
Mfr. #37-10-071-20
071 Series
4 holes, Ø 3.6 (.141) for three Ø 3 mm (.125)
rivets or M3 (No. 5) screws plus alignment lug.
HANDLE
Alternate: Weld keeper and bracket in place.
KEEPER
STYLE F RIVET BRACKET
47.8
(1.88)
12.7
(.50)
75 when latched
(2.94)
11.9
(.47)
24.2
(.95)
Alternate
mounting
position
Material and Finish
071, 086 and 100 Series
HANDLE: EPDM Rubber, black.
BRACKET: 302 stainless steel, passivated.
RIVET: 302 stainless steel, passivated
KEEPER F-Style: 302/304 stainless steel,
passivated.
19
(.75)
1.6
(.06)
8.7
(.34)
Product Strength Guidelines
071 Series
Average clamping force: 38.7 N (8.7 lbs.)
Average ultimate load: 142 N (32 lbs.)
L
COVER
ALIGNMENT
LUG
12.7
(.50)
31.8
(1.25)
15.9
(.63)
2 (.08)
FRAME
086 Series
Average clamping force: 49 N (11 lbs.)
Average ultimate load: 285 N (64 lbs.)
086 Series
HANDLE
T-Handle Latch assembled when shipped.
KEEPER
STYLE F
RIVET
BRACKET
Also available with Reversed
Keeper and Steel Zinc Plated
Hardware - Special Order.
Priced Singly
62
(2.44)
11.1
(.44)
31.8
(1.25)
31.8
(1.25)
4 holes, Ø 5.2 (.203) mount with four
5 mm (.1875) rivets or M5 (No. 10)
screws. Alternate: Weld keeper and
bracket in place.
102 when latched 16.6
(4.00)
(.656)
Alternate
mounting
position
SPAENAUR No.
097-815
Mfr. #37-10-086-20
086 Series
CATALOG 13
COVER
2
(.08)
18.3
(.72)
38.1
(1.50)
22.2
(.88)
2.4 (.09)
12.7
(.50)
FRAME
millimeter (inch)
Dimensions without tolerances
are for reference only.
Continued…
L156