Spaenaur

L
Slam-action Latches
Cliquets à action claquante
Corrosion Resistant Push Lock
• Push the door to latch
• Push the button to unlatch
• Optional Ejector Spring
helps prevent rattles
• Locking or non-locking
• With or without Pull Tab
STYLE A B C D Ref.
Latch only
Latch with
pull tab
EJECTOR SPRING,optional,
order separately.
Max. door
thickness
12.7
(.500)
10.5
(.415)
32±1.5
(1.25±.06)
29.5±1.5
(1.16±.06)
17±1.5
(.66±.06)
14.5±1.5
(.57±.06)
40
(1.57)
37
(1.47)
SPAENAUR No. Keylock Non-keylock
With Pull Tab in line with Latching Pawl. 097-420 097-421
Mfr. #93-303 Mfr. #93-304
With Pull Tab perpendicular to Latching Pawl. — —
Latch only - without pull tab 097-422 097-423
Mfr. #93-307 Mfr. #93-308
Ejector spring (if required)
15
(.60)
PAWL
24±1.5
(.94±.06)
16±1.5
Ø 29
(.63±.06)
(1.13)
Ø 19
(.74) 25
Ø
(.98)
MAX. door
thickness
(see table)
A
B FRAME
location if
adjustable keeper
is not used
C alternate
keeper
position
D
KEEPER: (supplied)
Mount keeper with
two M3 or No. 6
screws (not supplied).
Non-locking Locking 1"-20 thread
BUTTON
Locks are keyed alike.
Different key codes
LOCKWASHER
are available.
Call for details.
Optional Pull Tabs
Black Nylon
25±0.4
(1.000+.000 )
-.032
23 +0.1
-0.7
(.907 +.000 )
-.032
097-084
Mfr. #93- 21-301-14
Special Order
32 (1.25) across flats
MOUNTING NUT
097-083
Mfr. #93- 21-302-14
Material and Finish
HOUSING: Glass reinforced nylon, black.
PAWL: Acetal, black.
KNOB and KNOB PLUG: Polyester, black.
LOCK PLUG: Glass reinforced acetal, black.
CAM: Glass reinforced nylon/silicone,
black.
INTERNAL SPRINGS: 302 Stainless steel,
natural.
PULL TAB: Nylon, black.
MOUNTING NUT: Glass reinforced nylon,
black.
LOCKWASHER: 302 Stainless steel,
passivated.
KEEPER: 304 Stainless steel, passivated.
EJECTOR SPRING: 1065 steel, black
organic coating.
Strength Guidelines
Maximum working load:
530 N (120 lbs.)
Ultimate load:
690 N (155 lbs.)
Items with SPAENAUR No's Stocked
- Other Styles delivery 2-3 weeks.
Pull Tab In-line with
latching pawl
1. 2. 3. 4.
KEEPER
SOUTHCO
EDGE
OF DOOR
Pull Tab Perpendicular
to latching pawl
EDGE
OF DOOR
9.5±0.2 (.375±.010)
hole centers for
mounting keeper.
29.5 (1.16)
In-line with
latching pawl
32
(1.25)
;; yy
45.3REF.
(1.78)
2.4
(.09)
Perpendicular to
latching pawl
18
(.71)
REF.
Installation
1. Prepare panel and frame.
2. Insert latch through Pull Tab
(optional) and into hole.
3. Add lockwasher and mounting nut.
4. Install keeper and adjust for
proper latching.
CATALOG 13
+0.2
22.2 -0.0
(.875 +.010)
-.000
+0.2
25.5
Ø -0.1
+.010
(1.000 -.000 )
16±1.5
(.63±.06)
24±1.5
(.94±.06)
FRAME
7.9 N•m (70 in.- lbs.) max.
tightening torque for
mounting nut.
millimeter
(inch)
Dimensions without
tolerances are for
reference only.
L138