Spaenaur

Lift and Turn ® Latches
Cliquets «Lift and Turn ® »
Pawl-positioning Design
• Provides consistent compression
HANDLE AND SLEEVE: Die-Cast Zinc
SPRING: 302 Stainless Steel
• Operates with two steps
PAWL and PAWL RETAINING CLIP: 1010
• Positioning pin assures proper
Steel, Zinc Alloy Plate
latching
Other grip ranges order special.
19
(.75)
GRIP
SPAENAUR No.
16
Natural With Black
(.63)
Polished Brushed Chemical Polyester
Min. Max. Chrome Chrome Protective Film Powder Coated
2 (.08) 12 (.47)
097-018 — — 097-019
Mfr.#62-10-21 Mfr. #62-10-25
12 (.47) 22 (.87) 097-082 — — —
Mfr.#62-10-31
22 (.87) 32 (1.25) 097-082* — — —
32 (1.25) 42 (1.66) 097-018* — — 097-019*
42 (1.66) 52 (2.05) — — — —
*Reversed
Pawl position
Product Strength Guidelines - Small Size
Maximum working load: 550 N (125 lbs.)
Average ultimate load: 1100 N (250 lbs.)
LIFT
AND
TURN
HANDLE
57
(2.25)
LONG PIN
5°
55
(2.15)
MAX. OUTER PANEL
THICKNESS = 6 (.234)
SLEEVE
5/8-24
Thread
SMALL
GRIP
(SEE TABLE)
13 (.50) 32 (1.25) 39 (1.53)
; y
;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y;y
PAWL FORWARD
PAWL
REVERSED
;y;y;y;y;y;y;y;y;y;y;y
;y;y;y;y;y;y;y;y;y;y;y
PAWL RETAINING CLIP
LOCKWASHER
JAM NUT
MOUNTING NUT
MTG. LOCKWASHER
34
(1.34)
SHAFT
M8 Thread
5 (.19) PULL-UP
L
19.5
(.77)
LIFT
AND
TURN
80
(3.16)
LONG PIN
HANDLE
79
(3.13)
MAX. OUTER PANEL
THICKNESS = 6 (.234)
GASKET
SLEEVE
5/8-24
Thread
GRIP
(SEE TABLE)
PAWL FORWARD
PAWL RETAINING CLIP
LOCKWASHER
JAM NUT
MOUNTING NUT
MTG. LOCKWASHER
PAWL REVERSED
34
(1.34)
SHAFT
M8 Thread
5 (.19) PULL-UP
MEDIUM
GRIP
SPAENAUR No.
Black
Polished Brushed Powder
Min. Max. Chrome Chrome Coated
0 (0) 5 (.20)
097-090 — —
Mfr. # 62-30-11
097-020 097-021 097-079
5 (.20) 15 (.59)
Mfr. # 62-30-21 Mfr. # 62-30-22 Mfr. #62-30-25
15 (.59) 25 (.98) — — —
25 (.98) 35 (1.37) — — —
35 (1.37) 45 (1.77) 097-020* 097-021* 097-079*
45 (1.77) 55 (2.16) 097-090* — —
13 (.50)
32 (1.25) 42 (1.65)
*Reversed
Pawl position
Product Strength Guidelines
Medium style
Maximum working load: 670 N (150 lbs.)
Average ultimate load: 1100 N (250 lbs.)
A
INSTALLATION FOR ABOVE LATCHES
FRAME for top latching
FRAME
for side
latching
DOOR
B
A
C
LIFT
AND
TURN
1. Locate and orient hole with
respect to handle in latched
position (as shown in next step).
This hole orientation is preferred
for all latching positions.
2. Assemble as shown.
Items with SPAENAUR No. Stocked - Other Styles delivery 2-3 weeks.
Dimension
A
B
C
SMALL & MEDIUM
SERIES
23 +2
-1
PAWL
(.93±.06) FORWARD
28 +2 PAWL
-1
(1.10±.06) REVERSED
+0.1
16.3
-0.0
ø
(.640 +.005 )
-.000
13.7 +0.1
-0.0
(.540 +.005 )
-.000
3. Pawl should be adjusted to
GRIP measurement with
the door open and the
handle in the LATCHED
position. Use two wrenches
to tighten.
millimeter (inch)
Dimensions without tolerances
are for reference only.
CATALOG 13
L130