Spaenaur

CATALOG 13
Single-hole Mount
Large size
• Internally gasketed
• Most robust design
Grip Range
for 097-056 and 097-057
11.4 (.45) Min.
27.2 (1.07) Max.
Other Grip Ranges to 75 (3.0)
on special order.
097-056
Mfr. #E3-19-15
Slotted
Recess Style
097-057
Mfr. #E3-15-15
Tubular
Key Style
INSTALLATION
1.
24±1,5 Ø 22.5 +,02
-0,0
(.938 ±.062 )
(.885 +.000 )
-.010
DOOR
FRAME
T-Handle Style
(with or without Keylock.)
75°
Pawl in
open
position
19.1 +,02
-0,0
(.750 +.010 )
-.000
82.5 (3.25)
097-436 Mfr. #E3-27-1
Black Nylon
A
50
(1.97)
39 (1.54)
Ø11.5
(.455)
097-053
Mfr. #E3-5-15
Key sold
separately.
Vise Action ® Compression Latches
Cliquets à compression «Vise Action ® »
Housing: Die-cast zinc
Finish: Black Matte powder coated
Cam: 1075 Case hardened steel
Compressive Strength: Maximum working load 450N (100 lbs.)
OPTIONAL:
Round hole
installation with
spur washer
22 (.88)
PAWL
(Open Position)
2. & 3. Diagrams are
same as for singlehole
mount small
size. (See previous
page.)
18 (.70) MAX.
4 (.16) MIN.
door thickness
DOOR
Ø 29
(1.13)
32.5
(1.27)
millimeter
(inch)
Dimensions without
tolerances are for
reference only.
Grip Range 097-054 & 097-055, 11.4 to 27.2 (.45 to 1.07)
097-097, 38.9 to 54.6 (1.53 to 2.15)
75 °
BUSHING
Grip measured in
locked position
FRAME
GASKET
M22 x 1.5
MOUNTING NUT
Straight
pawl
MOUNTING
LOCKWASHER
32 (1.26)
64 (2.52)
19
(.75)
Pull Tab
(finger-grip tab)
18 (.70) MAX.
4 (.16) MIN.
door thickness
DOOR
33
(1.31)
29
Ø (1.13)
SLOTTED RECESS
2. (.07) wide x
7.5 (.30) deep, x
8.7 (.34) long
6.4 (.25)
Offset Deep
pawl offset
pawl
reversed reversed
PAWL
LATCH
ASSEMBLY
4. To adjust grip:
Measure your grip. Open
door. Position pawl on
shaft to your grip measurement
(with pawl in
latched position).
Tighten jam nuts hard
against lockwashers and
pawl using two wrenches.
LOCKWASHERS (2)
M10 JAM NUTS (2)
6.4
(.25)
Pull-up
Helps in lifting or pulling doors and
panels when tool or key operated
latches are used. Fits SPAENAUR No's.
097-056 and 097-057.
GRIP measured in
locked position
FRAME
GASKET
PAWL
LATCH ASSEMBLY
M22X1.5 MOUNTING NUT
MOUNTING
LOCKWASHER
64
(2.52)
GASKET
DOOR
INSTALLATION
1.Insert latch and tighten mounting nut.
2. With latch in closed position, adjust jam nuts to
position pawl at correct grip.
Installation dimensions same for large size single-hole
mount (shown above).
SPAENAUR No.
097-054 non-locking
Mfr. #E3-11-15
097-055 locking (keys included)
Mfr. #E3-18-15
097-097 locking (keys included)
Mfr. #E3-18-35
Edge of door
PAWL
FRAME
All Items This Page
Priced Singly
Tel: 1-800-265-8772 Fax: 519-744-0818
Deep Offset
Pawl Reversed
LOCKWASHERS (2)
M10 JAM NUTS (2)
For gasketed doors:
6.4 (.25)
PULL-UP
Housing: Die-cast zinc
Black Matte powder coated
Cam and Sleeve: 1075 Case
hardened steel
Pawl in
latched
position
When using
pull tab, add
2 (.084) to
your desired
grip range.
Straight
Pawl
Offset Pawl
Reversed
GRIP
(Measured with
gasket compressed)
L129
27 Sept 01
L