Spaenaur

Adjustable Grip Latches
Cliquets à griffe ajustable
Toolhead ® Recess
Adjustable Grip Latch
Medium Size
• Adjusts to your panel thickness
• Draws tightly against panel or gasket
Type
“A”
Turn clockwise
to latch.
Material and Finish
PAWL and RETAINING WASHER:
1010 steel.
BUSHING: 12L14 steel. The
components listed above are zinc
plated plus yellow chromate dip.
SPRING: 302 Stainless steel,
passivated. CONICAL SPRING: 302
Stainless steel, passivated.
HOUSING: 1010 steel, zinc plate,
chromate plus sealer.
SCREW: 12L14 steel, zinc plate,
chromate plus sealer.
For Trimplate:
PLATE: 1010 Steel, phosphate dip
plus black powder coated. STUDS:
10B21 Steel, phosphate dip. NUTS:
Steel, DACHROTIZED†,
LOCKWASHERS: Spring steel,
DACHROTIZED†.
†Registered trademark of Metal Coatings
International.
MIN. MAX.
3.2 9.5
(.125) (.375)
Operating Temperature Range:
-20°C to 80°C (-0°F to180°F)
L
Latch Only
097-086
Mfr. #44-T-1
Trimplate Only
097-088
Mfr. #44-30-101-10
Key Only
(Must be ordered separately)
097-087
Mfr. #29-90-215-10
A
Pawl Style
and Position
Panel Preparation
Installation
1.Prepare door.
2.Pass knob of latch
through centre hole
and secure with two
rivets or screws.
Trimplate Installation
Two nuts and two lockwashers are supplied.
Maximum recommended tightening torque for
mounting nuts: 2.8 N•m (25 in.-lbs).
Product Strength Guidelines
Maximum working load: 490 N (110 lbs.)
Average ultimate load: 1070 N (240 lbs.)
CATALOG 13
L124
OTHER GRIP RANGES, HEAD STYLES and
STAINLESS STEEL Available Special Order.
millimeter (inch)
Dimensions without tolerances
are for reference only.