Spaenaur

L
Van Door Hardware
Quincaillerie pour les portes de fourgonnette
Steel
Door Hinge
Zinc
Plated
The hinges shown here are all 8" stamped steel hinges designed
for flush mounting over door seals. All are equipped with hardened
steel truss bearings to effectively carry the door loads . . .
180° door movement.
Has 7/16" clearance over the seal.
5 mounting holes, 11/32" dia.
Weight: 2 lbs., 3 oz. each.
Specifications:
#7 gauge hot rolled steel.
Dimensions:
8" centre of pin to end of strap.
3-1/16" centre of pin to end of butt plate.
4-1/2" butt plate width.
2" strap width.
SPAENAUR No. Mfr. # Description
099-050 5889 Right-Hand
099-051 5889 Left-Hand
099-052 5889-E1 Right-Hand
099-053 5889-E1 Left-Hand
099-054 5889-E2 Right-Hand
099-055 5889-E2 Left-Hand
REAR DOOR HINGES
for Square Corner Vans
Permits doors to swing around against sides of body.
D-3193 (Mfr. #5818)18" centre pin to end of strap.
D-3192 (Mfr. #5819) 26" centre pin to end of strap.
— with Milled Joint
Plain Finish.
1-1/2" width of strap.
1-9/16" length of butt plate.
5-9/16" width of butt plate.
4" c. to c. holes in butt plate.
13/32" dia. holes in butt plate.
When ordering specify Right-Hand or Left-Hand.
Same as 099-050 but with sheared butt as shown by
dotted line above.
Same as 099-052 but with removable hinge pin.
OVER THE SEAL HINGES — FLUSH
Finish: Zinc Plated
Dimensions & Style:
Same as 099-050 above, but with longer strap. — 1/2"
diameter steel pin will fit right or left.
Length
SPAENAUR No. of Strap
099-056 12"
099-058 16"
8 gauge Stamped Steel
Mounting
holes
for 5/16" bolts
Inch
Pouce
099-069
1/8" Shim
Steel, Zinc Plated
Use for all 099-050 to 099-058 hinges
when 1/8" offset is required.
All items
on this page
Priced Singly
CATALOG 13
L98
18 June 02