Spaenaur

Inch
Pouces
Slam Action Strike
SPAENAUR No.
099-046
SLAM
Door Hardware
Quincaillerie pour les portes
Inch
(mm)
.250
(6.35 mm)
.69
(17.48 mm)
.47
(11.91
mm)
WITHDRAW
This simple, effective strike is intended for use with
many latching mechanisms having 5/16" diameter
rods, which normally operate as dead bolts.
This strike allows such a latching mechanism to
operate as a slam/dead bolt. The strike has a spring
loaded plunger which permits the rod to pass into the
strike and capture it. The rod cannot be released in
the opposite direction.
Instead, the rod is withdrawn in customary dead bolt
fashion (i.e., a centre mechanism must be turned to
retract the rod from the strike. See illustration here).
May be used, for example, in conjunction with
D-3242R & L Dead Bolt Lock, (shown at left) if
equipped with 5/16" dia. rods.
Easily attached with screws, rivets or bolts.
Weight: 2 ozs.
Material: Zinc Die-Cast,
Plastic Trigger, Stainless
Steel Spring.
Dimensions,
.78
(19.84 mm)
L
.344
(8.73 mm)
1.69
(42.8 mm)
.312 DIA. ROD IS REQUIRED
.38 (9.52 mm)
.19 (4.77 mm)
.328 DIA.
(8.33 mm)
.95
(24.21 mm)
ORBITAL RIVET
5 PLACES
CATALOG 13
.145 DIA. COUNTERSINK
82° TO .268 DIA.
2 - MOUNTING HOLES
Typical
Applications
.164 R. (4.17 mm)
Shrouds for
Motor/Generator
Storage Cabinets
NOTE
Drawings and dimensions are for reference only. For
manufacturing production or tooling purposes, obtain
current engineering print from SPAENAUR.
Tel: 1-800-265-8772 Fax: 519-744-0818
L77
14 June 02