Spaenaur

Multi-Purpose Handles & Locks
Poignées et serrures multi-usages
D-1410 Series LOCKING KNOBS
For steel lockers, cupboards, office furniture, electrical cabinets and equipment panels.
3-point locking mechanism (removable): a plated steel cam and bolt pick-up mechanism is supplied
to enable espagnolette bolt action to be used. (Locking rods are not supplied.)
Satin Chrome Finish
(Escutcheon & Knob)
2-1/4" DIA.
(57.15 mm)
7/32"
(5.556
mm)
13/32"
(10.319 mm) ZINC BASE DIE-CASTINGS
1-9/16" 5/16"
(39.687 mm) Sq. shank
Inch
Pouces
L
Shown
half size
Series 92
SPAENAUR
No.
DESCRIPTION
D-1410R Locking knob, with 2 keys, all to differ, for fixing to right edge of left door. Action 90°
anti-clockwise to open.
D-1410L Locking knob, with 2 keys, all to differ, for fixing to left edge of right door. Action
90° clockwise to open.
D-1410RKA
D-1410LKA
D-1410RMK
D-1410LMK
D-1410D
Priced Singly
Black high-impact
Styrene sleeve
19/32"
(15.23 mm)
3/4"
(19.05 mm)
Locking knob, with 2 keys, all keyed alike, for fixing to right edge of left door. Action
90° anti-clockwise to open.
Locking knob, with 2 keys, all keyed alike, for fixing to left edge of right door. Action
90° clockwise to open.
Locking knob, master keyed, with 2 keys, all to differ, for fixing to right edge of left
door. Action 90° anti-clockwise to open.
Locking knob, master keyed, with 2 keys, all to differ, for fixing left edge of right
door. Action 90° clockwise to open.
Dummy fixed knob, non-operating, no spindle or locking mechanism. Acts as a
door pull, or to give a balance to the operating knob.
To order Master Keys and for Additional Data see page L2.
D-1415 Series LOCKER LOCKS
For use on metal and wooden lockers, cabinets, drawers, etc.
1-5/8"
(41.275
mm)
Two Fixing Screws
10-32 UNF x 1/4"
1-1/2"
(38.1 mm)
7-lever master keyed mechanism operating an extruded brass bolt. The lock bolt protrudes 1/4" when shot.
Die-cast cap and nozzle, with a plated steel back plate. The lock has a chromatised finish. Two nickelplated
steel keys are supplied with each lock. 1,800 key changes are available.
Variations from the standard locks listed
Also available keyed alike.
hereon are available on a special order
9/16"
basis (minimum quantity 500 one number
1/4" 1-11/16"
1/4" or assorted) as follows, (prices on request):
(1) With lock bolt protrusion of 19/64"
when shot, the bolt standing 3/64"
proud when withdrawn.
1-1/2"
2-5/8"
5/8" (2) With a riveted-on back.
23/32"
DIA.
SPAENAUR
2-1/4" No. Description
D-1415MK Locker lock, master keyed, with
2 keys, all to differ.
D-1415KA Locker lock, master keyed, with
FIXING HOLES 15/64" DIA.
2 keys, all keyed alike.
1/4"
Order Master Keys Separately.
Priced Singly
D-1415KM Master key
P.C. 096
CATALOG 13
L10