Spaenaur

Inch
Pouces
Auto Glass Shop Items
Articles pour vitres d’automobile
T-236 (Mfr. #MR215)
UNIVERSAL
MOULDING RELEASE TOOL
RELEASES MOULDING ON ALL CARS
WITH CEMENTED GLASS!
No need for an assortment of tools, the heavy-duty T-236 releases
both Ford and GM mouldings. It instantly lifts clips and releases
windshield and rear vision mouldings on all cars with the new
cemented glass. The front edge of tool is beveled for easy entry
under moulding. Angled points permit pulling tool at a slight angle
for easiest possible manipulation of the tool.
Right and left release points are on same end of tool. No
need to turn tool end for end or to change tools. The T-236
releases mouldings from either side. Removes mouldings in a
fraction of the time required with any other tool. Heat treating
makes the Universal Moulding Release Tool extremely resistant
to wear, but will permit a certain amount of reshaping to suit
individual requirements. This wide tool lays flat on glass, feels
right, works right.
T-227 WINDSHIELD KNIFE —
Blade fits under glass from outside. Cuts old adhesives on rubberless
windshield jobs.
T-227B REPLACEMENT BLADE
K
T-226L (Left) T-226R (Right)
REVEAL MOULDING CLIP TOOL
Removes moulding from retaining clips on rubberless windshield
installations.
T-238R (Right)
T-238L (Left)
Clip Tool for W/S and back
glass using rubber mounting.
T-229RL REVEAL MOULDING TOOL —
Double ended style combining right and left hand, for removal
of windshield reveal moulding on
rubberless installations.
CATALOG 13
T-235
LOCKING STRIP
TOOL
Inserts the wider locking strip in
self-sealing rubber weatherstrip
as used on a Valliant.
See page K5 for
Weatherstrip Installation
Tools.
All items on this page are PRICED SINGLY.
NOTE: Due to the nature of the usage and the thinness of
the material required for these tools, they cannot be
guaranteed against breakage.
Tel: 1-800-265-8772 Fax: 519-744-0818
K31
26 Sept 01