Spaenaur

Inch
Pouce
Extruded
Special Shapes
"R
"
PVC BOAT GUNWALE STRIPPING
" 825-346 RW-107
BLACK
WHITE
U.P.Q. 200 ft.
" " U.P.Q. 250 ft.
Flexible, Inert.
Resistant to Chemicals, Salt Water, etc.
Continuous Length Vinyl
"
Duro 70
"R
1"
WALL
THICKNESS
"
3"
1"
Extruded Shapes
Formes extrudées
Material: EPDM, SBR, Vinyl, etc., as indicated.
Hardness: Duro shown subject to ±5. Colour: White, unless otherwise indicated.
WHITE RUB RAIL
825-309
For Boat Docks,
Hospital Corridors, etc.
PVC
Duro 85A
U.P.Q. 25 ft.
For "Elastomer Compound Characteristics" chart see page R19.
"
"
"
"
Duro 65 to 85
BOAT DECK WINDSHIELD CHANNEL
SPAENAUR
Unit
No. Colour Material Pkg.
C-21 Black SBR 50' roll
C-21PG Green Vinyl 250' roll
C-21-P3 Grey Vinyl 250' roll
GUNWALE GUARD STRIP
(Concealed screw-on type)
For Boats
Unit Package100 ft.
1 " 1 "
SPAENAUR No. Colour Material Duro
RW-50P Black Vinyl 85
■ Easy to install and maintenance-free
■ Contains fungicide to retard mould and mildew
■ Cuts easily to desired lengths
Smooth, Protective, Safer Docking
825-504 825-505
"
1 "
Grey Marine-grade PVC
"
GUNWALE GUARD STRIP
For Boats — "Friction Fit"
Off-White Vinyl
RW-56
70 Durometer
Unit Package 1 - 105 ft. length.
■ Environmentally safe in fresh and salt water
■ UV inhibitors prevent warping and cracking in extreme temperatures
C - Shaped
825-506
bumpers
825-508 Same as above except white
K
CATALOG 13
A heavy-duty,
marine-grade
bumper
Coverage
17'-18' (from 25' Roll)
Your best insurance against unnecessary
boat damage. Easy to install, all it takes is a
hammer, broadhead nails, and a sharp knife.
Just mark the strip for 10-inch nail spacing,
and the dock for 7 to 8-inch spacing. The
result is an S-shape installation—a wave of
protection, providing maximum shock
absorbency.
Width 5"
Thickness 1/4"
7" to 8"
10"
Unit Pkg. Qty
1-25 ft. roll
Edge-Guard
bumpers
An innovative, reinforced P-shaped design
adds a protective lip over the dock edge—
taking high impact in stride.
These heavy-duty, shock-absorbent, marinegrade
PVC bumpers are easy to install, and
can be easily cut to any length.
No doubt about it, Edge-Guard bumpers
definitely provide the edge you need for
superior protection of your boat and dock.
3 " 1 "
"
" "
Width 1-7/8"
Thickness 1/8"
Height 3-1/4"
Unit Pkg. Qty.
15-6 ft. lengths
C-Shapes are specifically designed for use on
straight-up verticals or pilings, while still
providing outstanding horizontal protection.
Economical and easy to install, the tough, shockabsorbent
PVC will provide years of safer
docking.
1 " 3 "
Tel: 1-800-265-8772 Fax: 519-744-0818
"
Width 3-5/8"
Thickness 1/4"
Height 1-1/4"
Unit Pkg. Qty.
825-506 15-6 ft. lengths
825-508 1-6 ft. length
C-Shapes bumpers can also be
used in non-marine applications
for added protection.
K9
13 Sept 02