Accesorios Fluke 2015

More documents

Recommendations

Info

Fluke offers a popular line of test accessories specifically designed for automotive systems and components, both electric and electronic. These accessories are compatible with all Fluke meters. 88V Automotive 44 BP880 BP881 BP880 BNC to Female Double Stacking Banana Converts a BNC scope lead to a dual banana plug for connection to a digital multimeter to provide hands-free testing in controlled voltage environments. Required when adapting a shielded BNC cable, found on high-end low current clamps such as the Fluke 80i-110S AC/DC Current Clamp, to a digital multimeter. • Voltage range: up to 500 V ac rms • 4 mm (0.16 in) banana plug is nickel-plated, beryllium copper for low contact resistance BP881 BNC to Male Double Stacking Banana Easily connects a digital multimeter to a BNC patch cord to provide hands-free testing in controlled voltage environments. This adapter connects accessories that have a male BNC output. • Voltage range: up to 500 V ac rms • 4 mm (0.16 in) banana plug is nickel-plated, beryllium copper for low contact resistance TL28A Automotive Test Lead Set Silicone-insulated test leads (red, black) with large, solid copper alligator clips with 12.7 mm (0.5 in) opening and serrated teeth. Also includes a large piercing needle within the jaws for penetrating larger gauge wires. • 1.5 m (60 in) test leads • Safety rating: CAT I 30 V, 10 A TL82 Automotive Pin and Socket Adapter Set This collection of male and female adapters provides firm connection to pin-and-socket connectors. Useful when making voltage, frequency, duty cycle, or resistance measurements and when measuring current in series in the circuit. Rated to 60 V dc. Set includes: • Two retractable shrouded test leads (red, black) 1.2 m (48 in) • Eight pin-and-socket adapters with flexible tips (red, black) in the following sizes: –Size 22 contact 0.76 mm (0.03 in), rated 5 A –Size 20 contact 1.02 mm (0.04 in), rated 7.5A –Size 16 contact 1.60 mm (0.063 in), rated 13 A –Size 12 contact 2.36 mm (0.093 in), rated 23 A TL28A TP40 TLK281 TLK282 TP81/TP82
TLK281 SureGrip Automotive Test Lead Kit This complete set of test and measurement accessories is designed for automotive specialists. Sharp stainless steel probes can be used to contact the wire conductor or pinpoint tests on a circuit or relay while the large-jaw alligator clips ensure a good ground on the engine or connection to battery terminals. Also includes silicone-insulated test leads and a convenient case. Rated to 60 V dc. Kit includes: • TP81 Insulation Piercing Clip Set • TL224 SureGrip Insulated Test Leads • TP220 SureGrip Industrial Test Probes • AC220 SureGrip Alligator Clips • AC285 SureGrip Alligator Clips • Soft case TL82 TLK282 SureGrip Deluxe Automotive Test Lead Kit This kit includes everything in the TLK281 Kit plus a few extras. The back probe pins slide past weather-pack connectors on fuel injectors, TPS, and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or exposed conductors. Kit includes: • TP81 Insulation Piercing Clip Set • TP40 Automotive Back Probe Pins (five) • TL224 SureGrip Insulated Test Leads • TP220 SureGrip Industrial Test Probes • AC220 SureGrip Alligator Clips • AC285 SureGrip Alligator Clips • AC280 SureGrip Hook Clips • Soft case • Rated to 60 V dc TP40 Automotive Back Probe Pins Flexible and formable 31.75 mm (1.25 in) pins provide an easy connection past weather-pack seals to connector conductors. These five pins are a musthave for fuel injectors, TPS, and MAP sensors, as well as for any under-hood or under-vehicle connector with weather-pack seals. • 4 mm (0.16 in) banana jack accepts digital multimeter and banana jack leads • Easily connects to modular leads such as the TL224 • Rated to 60 V dc TP81/TP82 Insulation Piercing Clip Set Two stainless steel probes (red, black) pierce insulation on 14, 16 and 18 gauge wire. Needle depth can be controlled to minimize insulation damage. Essential for use under hood or under dash. Can be used on fuel injectors or sensors while providing complete insulation to grounding. Probe connects to a banana jack that accepts all digital multimeter and banana jack leads (such as the TL224 SureGrip Insulated Test Leads). • TP1 has non-rotating 4 mm (0.16 in) banana jack to prevent leads from tangling • Rated to 60 V dc • TP82 is for use with test leads with 2 mm probes TP88 Rigid Back Probe Pins Better than a test probe alone, these rigid back probe pins easily pass between a weatherpack seal and wire. A sharp point ensures good contact to the electrical connector, and insulation protects the pin from shorting to other wires. • Slides onto 2 mm (0.08 in) test probes • Probe length: 51 mm (2 in) • Rated to 60 V dc RPM80 Inductive Pick-Up/External Trigger • Provides RPM measurement capability when clipped on spark plug wire • For use with Fluke 88 Series and 78 Series DMMs Automotive 45 TP88 RPM80 For more information, go to www.fluke.com/auto-accy
Page 1 and 2: Accessories Catalog Expand the capa
Page 3 and 4: RUN Table of contents Test leads 4
Page 5 and 6: Left to right: AC283, AC280, TP175,
Page 7 and 8: TL910 Electronic Test Probes One pa
Page 9 and 10: Modular clips (for use with modular
Page 11 and 12: How to choose the best test probe f
Page 13 and 14: Clips and probes compatibility char
Page 15 and 16: FTP-1 / FTPL-1 SureGrip Fused Test
Page 17 and 18: The innovative SureGrip design from
Page 19 and 20: 80PK-8 80PK-10 80PK-11 80PR-60 80TK
Page 21 and 22: Left to right: i800, i400, i200s AC
Page 23 and 24: i3000s AC Current Clamp This ac cur
Page 25 and 26: Left to right: i410, 80i-110s, i30
Page 27 and 28: i310s AC/DC Current Clamp Based on
Page 29 and 30: CXT Hard cases compatibility 29 Har
Page 31 and 32: C115 Soft Carrying Case Includes tw
Page 33 and 34: C1600 Gear Box for meter and access
Page 35 and 36: Left to right: 3533001, 810 Tachome
Page 37 and 38: L200 Probe Light Small, rugged ligh
Page 39 and 40: Battery and charger compatibility P
Page 41 and 42: RS500 Probe Accessories Replacement
Page 43: FlukeView ® Forms Software FlukeVi
Page 47 and 48: MC6 87-Retrofit kit PV350 FOS-850/1
Page 49 and 50: Model number 345 430 II 1730 1735/1
Page 51 and 52: Process tools 700PTPK Pneumatic Tes
Page 53 and 54: 1 1AC II VoltAlert Non-contact volt
Page 55 and 56: P PM9081 Adapter BNC Dual Banana Fe

Accesorios Fluke 2015

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?