Technical Finishes Profile

MATERIAL SAFETY DATA SHEET
41 Circuit Rd ,
Westmead, Kwa-Zulu Natal,
South Africa
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1
Suitable material: Keep in original containers
Handling / storage precautions: Keep containers closed and in a dry place
SOLIDWEAR HP800 EPOXY
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Occupational exposure limits: None
Engineering control measures: Local exhaust systems, natural air flow
Personal protection – respiratory: None
Personal protection – hand: Rubber gloves
Personal protection – eye: Not expected to be necessary
Personal protection – skin: Apron, closed shoes, overalls
Other protection: None
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Black paste
Odour: Resin odour
pH: Not applicable
Boiling point: Not applicable
Melting point: Not applicable
Flash point: 252C
Flammability: None
Autoflammability: None
Explosive properties: None
Oxidizing properties: None
Vapour pressure: None
Density: 2.7
Solubility – water: No
Solubility – solvent: Yes
Solubility – coefficient: Not known
Neurotoxicity: None
10. STABILITY AND REACTIVITY
Conditions to avoid: Heat
Incompatible materials: Strong organic acids and alkalis, oxidizing materials
Hazardous decomposition products: Carbon monoxide, phenolics
11. TOXICOLOGICAL INFORMATION
Acute toxicity: Not known
Skin and eye contact: Not known
Chronic toxicity: Not known
Carcinogenicity: None
Mutagenicity: None
Neurotoxicity: None
Reproductive hazardous: None
12. ECOLOGICAL INFORMATION
Aquatic toxicity – fish: 3.1mg/l (fathead minnow)
Aquatic toxicity – daphnia: 1.3mg/l
Aquatic toxicity – algae: Not known
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4