You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TECHNICAL DATA SHEET<br />
SOLIDBACK HP<br />
11 August 2016, Rev 2<br />
SOLIDBACK HP<br />
High performance backing<br />
DESCRIPTION<br />
Solidback HP - HI-PERFORMANCE BACKING is a 100% Solids reactive resin system<br />
for backing metal wear plates in large gyratory crushers and cone crushers. It offers<br />
excellent impact strength and resilience, together with high compression and tensile<br />
strengths. It is non-flammable, easy to mix and apply and on curing has no shrinkage which<br />
eliminates the gaps between backing and liners or support structures. Ideally suited to<br />
Chrome, Platinum, Manganese and Iron ores to improve liner life.<br />
BENIFITS<br />
Non Hazardous<br />
No molten zinc and peripheral equipment<br />
100% solids co-polymer system.<br />
Saves downtime and money.<br />
Tough and resilient.<br />
Easy and safe to use.<br />
PHYSICAL PROPERTIES (all at 25°)<br />
Compressive strength<br />
> 110Mpa Suitable for large Gyratory and Cone<br />
crushers<br />
Working time<br />
20 - 25 Minutes<br />
Gel time<br />
45 Minutes<br />
Operational time<br />
6 Hours<br />
Mixed colour<br />
Red<br />
Kit size<br />
20kg (12.4 litres)<br />
APPLICATION INSTRUCTIONS<br />
Store backing material and concaves between 10°C - 25°C for 24 hours prior to application.<br />
Backing surface of concaves should be free of rust, dirt, grease and oil.<br />
Place the first row of concaves and support them in the usual manner.<br />
Use wood strips around each concave to obtain even spacing.<br />
A light coating of release agent should be applied to all surfaces of the bowl or mantle to<br />
facilitate future removal of worn liners.<br />
N.B DO NOT APPLY RELEASE AGENT ONTO LINERS THEMSELVES<br />
Seal gaps between cancaves to prevent leakage with Solidfix TROWL MIX.<br />
If ambient temperatures are expected to be below 16°C, apply heat with torches between<br />
concaves and the shell to bring the temperature up to the specified level, preferably 32°C,<br />
but not more than 60°C.<br />
Premix resin in large pail for one minute using a low speed drill.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
Change language