combined small
MATERIAL SAFETY DATA SHEET SOLIDWEAR HP800 ACTIVATOR ACTIVATOR 41 Circuit Rd, Westmead, Kwa-Zulu Natal, South Africa Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1 16. OTHER INFORMAION Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION. Please refer to the disclaimer in section 16 at the end of this material safety data sheet. TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET SOLIDWEAR HP800 EPOXY 41 Circuit Rd , Westmead, Kwa-Zulu Natal, South Africa Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1 1. PRODUCT INFOROMATION Trade name: SOLIDWEAR HP800 Chemical abstract no.: Not Available Chemical family: Mixture NIOSH no.: Not Available Chemical name: Mixture Hazchem code: Not Available Synonyms: Epoxy Resin UN no.: 3082 2. COMPOSITION Hazardous components: Ingredient CAS no. Percent R Phrase EEC Epichlorohydrin & Bisphenol A ALUMINIUM OXIDE FILLERS 3. HAZARDS IDENTIFICATION 025085-99-8 25 - 30 60 -65 R38, R43, R52 Xi Main hazard: Skin and eye irritant Flammability: None Chemical hazard: None Biological hazard: None Reproductive hazard: None Health effects – eyes: Reddening, irritation Health effects – skin: Skin reddening, significant irritation with possible sensitization Health effects – ingestion: Stomach ache, nausea and vomiting Health effects – inhalation: None Carcinogenicity: Not classified as a carcinogen but there is evidence for carcinogenicity Mutagenicity: None Neurotoxicity: None 4. FIRST AID MEASURES Product in eye: Flush eyes with water and seek medical attention Product on skin: Flush with water and remove clothing. Seek medical advice if irritation develops Product ingestion: Do not induce vomiting. Get immediate medical attention Product inhaled: Remove to fresh air. Seek medical advice if breathing becomes difficult 5. FIRE FIGHTING MEASURES Extinguishing media: Dry Powder or C02 Special hazards: None Protective clothing: Yes 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Wear protective clothing as indicated in section 8 Environmental precautions: Do not discharge to natural water systems Small spills: Collect in a container for disposal and wash areas with clean water Large spills: Collect in containers for disposal. Rinse affected areas with clean water to effluent. 7. HANDLING AND STORAGE Please refer to the disclaimer in section 16 at the end of this material safety data sheet. TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 1 of 4
- Page 1: Corrosion ProteCtion P O L Y S C R
- Page 4 and 5: STEEL PROTECTION PRODUCT NAME DESCR
- Page 6 and 7: P O L Y S C R E E D Corrolam solidg
- Page 8 and 9: Mining Products INDEX Technical Fin
- Page 10 and 11: TECHNICAL DATA SHEET SOLIDGUARD 88
- Page 12 and 13: TECHNICAL DATA SHEET Eposhield HCP
- Page 14 and 15: TECHNICAL DATA SHEET Eposhield ST 1
- Page 16 and 17: TECHNICAL DATA SHEET Corrolam VEP G
- Page 18 and 19: TECHNICAL DATA SHEET SOLIDGUARD LV
- Page 20 and 21: TECHNICAL DATA SHEET SOLIDFIX FS WE
- Page 22 and 23: TECHNICAL DATA SHEET SOLIDWEAR HP 1
- Page 24 and 25: TECHNICAL DATA SHEET SOLIDWEAR HP 5
- Page 26 and 27: TECHNICAL DATA SHEET SOLIDWEAR HP 8
- Page 28 and 29: TECHNICAL DATA SHEET SOLIDBOND QSP
- Page 30 and 31: TECHNICAL DATA SHEET SOLIDBACK HP 1
- Page 32 and 33: TECHNICAL DATA SHEET SOLIDBACK ST 1
- Page 34 and 35: MATERIAL SAFETY DATA SHEET SOLIDGUA
- Page 36 and 37: MATERIAL SAFETY DATA SHEET SOLIDGUA
- Page 38 and 39: MATERIAL SAFETY DATA SHEET 5 Progre
- Page 40 and 41: MATERIAL SAFETY DATA SHEET SOLIDGUA
- Page 42 and 43: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 44 and 45: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 46 and 47: MATERIAL SAFETY DATA SHEET 41 Circu
- Page 48 and 49: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 50 and 51: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 54 and 55: MATERIAL SAFETY DATA SHEET 41 Circu
- Page 56 and 57: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 58 and 59: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 60 and 61: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 62 and 63: MATERIAL SAFETY DATA SHEET 41 Circu
- Page 64: MATERIAL SAFETY DATA SHEET SOLIDWEA
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP800 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
Change language