combined small
Corrosion ProteCtion P O L Y S C R E E D Corrolam solidguard
- Page 3 and 4: CONCRETE PROTECTION PRODUCT NAME DE
- Page 5 and 6: PRODUCT GROUP CONCENTRATION % TEMPE
- Page 7 and 8: TECHNICAL FINISHES COMPANY PROFILE:
- Page 9 and 10: TECHNICAL DATA SHEET SOLIDGUARD 88
- Page 11 and 12: TECHNICAL DATA SHEET Eposhield HCP
- Page 13 and 14: TECHNICAL DATA SHEET Eposhield ST 1
- Page 15 and 16: TECHNICAL DATA SHEET Corrolam VEP G
- Page 17 and 18: TECHNICAL DATA SHEET SOLIDGUARD LV
- Page 19 and 20: TECHNICAL DATA SHEET SOLIDFIX FS WE
- Page 21 and 22: TECHNICAL DATA SHEET SOLIDWEAR HP 1
- Page 23 and 24: TECHNICAL DATA SHEET SOLIDWEAR HP 5
- Page 25 and 26: TECHNICAL DATA SHEET SOLIDWEAR HP 8
- Page 27 and 28: TECHNICAL DATA SHEET SOLIDBOND 110S
- Page 29 and 30: TECHNICAL DATA SHEET SOLIDBACK HP 1
- Page 31 and 32: TECHNICAL DATA SHEET SOLIDBACK ST 1
- Page 33 and 34: MATERIAL SAFETY DATA SHEET SOLIDGUA
- Page 35 and 36: MATERIAL SAFETY DATA SHEET SOLIDGUA
- Page 37 and 38: MATERIAL SAFETY DATA SHEET SOLIDGUA
- Page 39 and 40: MATERIAL SAFETY DATA SHEET 5 Progre
- Page 41 and 42: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 43 and 44: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 45 and 46: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 47 and 48: MATERIAL SAFETY DATA SHEET 41 Circu
- Page 49 and 50: MATERIAL SAFETY DATA SHEET SOLIDWEA
- Page 51 and 52: MATERIAL SAFETY DATA SHEET SOLIDWEA
Corrosion<br />
ProteCtion P O L Y S C R E E D Corrolam solidguard
CONCRETE PROTECTION<br />
PRODUCT NAME DESCRIPTION AREAS OF APPLICATION/MARKET FOCUS<br />
CORROLAM<br />
H05 / VO5<br />
Trowel applied vinyl ester epoxy resin screed.<br />
It has high chemical resistance and the system<br />
is designed for demanding acid or highly<br />
alkaline environments. Its durability, resistance<br />
to thermal shock as well as chemical<br />
resistance is unmatched.<br />
• Ideal for demanding environments such as acid plants,<br />
Power Stations, Mining industry bund areas for<br />
secondary containment areas in processing plants.<br />
• Exterior containment areas.<br />
• Can also be used as a chemical resistant tank lining.<br />
CORROLAM RC<br />
A chemical resistant vinyl ester roller top coat<br />
that is used as protection in acid or highly<br />
alkaline environments. It can be applied over<br />
existing laminate systems or fibre wound<br />
tanks as a rejuvenation coat and can also be<br />
used as a top coat on new laminate systems.<br />
• Ideal for the protection of concrete walls, equipment<br />
and tank bases, floors and drains against aggressive<br />
chemicals in bund areas.<br />
• Tank linings with aggressive chemicals.<br />
• Acid bunds, tank linings top coats or rejuvination coats.<br />
CORROLAM GL<br />
A chemical resistant epoxy vinyl ester resin<br />
laminating resin that is also used in demanding<br />
acid or highly alkaline environments. It is<br />
applied in combination with glass fibre and<br />
chemical resistant C glass veil for optimum<br />
chemical resistance and excellent crack<br />
bridging capabilities.<br />
• Ideal for protection of concrete structures, equipment<br />
bases, floors and drains against aggressive chemicals<br />
that may experience a high amount of movement.<br />
• Exterior and interior Acid bunds as well as a range of<br />
chemical resistant tank linings ie: Chloride dioxide tanks,<br />
Flue gas scrubbers, acid and alkali tanks.<br />
CORROLAM UT<br />
A chemical resistant epoxy vinyl ester system<br />
with a non-slip screeded finish of Corrolam<br />
RC vinyl ester sealcoat for optimum chemical<br />
and slip resistance.<br />
• Ideal for demanding environments such as Acid plants,<br />
Power Stations, Mining industry bund areas for<br />
secondary containment areas in processing plants<br />
requiring a non-slip finish.<br />
• Exterior and interior secondary containment areas for<br />
chemical resistance.<br />
POLYSCREED HF<br />
Abrasion and temperature resistant, heavy<br />
duty trowel applied polyurethane flooring<br />
system. Polyscreed HF incorporates silver<br />
ion’s for antimicrobial protection in the food<br />
environment and is applied between 8 -<br />
10mm for high wear and abrasion resistance<br />
as well as excellent temperature resistance of<br />
up to 140 0 C.<br />
• Food and beverage wet processing plants ie: Bakeries,<br />
Butcheries, Bottling Halls, etc.<br />
• Brewery wet processing areas with high temperature<br />
requirements.<br />
• Heavy duty Engineering workshops.<br />
• Chemical resistance lining for secondary containment<br />
areas with chemical attack in processing plants, mines<br />
and high impact areas.<br />
POLYSCREED RT<br />
Abrasion, chemical resistant, heavy duty<br />
flow applied Rake and Trowel polyurethane<br />
flooring system. Polyscreed RT resin system<br />
incorporates silver ion’s for antimicrobial protection<br />
in the food processing environment<br />
and is applied between 6 - 8mm. Temperature<br />
resistance of up to 120 0 C.<br />
• Food and beverage processing plants ie: Bakeries,<br />
Butcheries, Bottling Halls, Wineries, etc.<br />
• Brewery processing areas.<br />
• Heavy duty Engineering workshops.<br />
• Loading and wash bays.<br />
POLYSCREED MD<br />
Abrasion and chemical resistant, medium<br />
duty flow applied polyurethane flooring system.<br />
Polyscreed MD is a resin system which<br />
also incorporates antimicrobial silver ion<br />
protection and is applied between 3 - 4mm.<br />
• Storage areas.<br />
• Dry or wet processing areas.<br />
• Areas with high fork lift traffic and impact.<br />
• Automotive manufacturing areas.<br />
• Packaging areas.<br />
POLYSCREED WR<br />
Abrasion and chemical resistant, light weight<br />
trowel applied polyurethane wall render. This<br />
resin system incorporates antimicrobial silver<br />
ion protection. Applied between 2 - 25mm.<br />
• As a wall render in Food and beverage processing plants.<br />
• Brewery processing bund areas.<br />
• Heavy duty Engineering workshops wall covings.<br />
• Loading and wash bays skirtings and wall applications.
STEEL PROTECTION<br />
PRODUCT NAME DESCRIPTION AREAS OF APPLICATION/MARKET FOCUS<br />
SOLIDKOTE 227<br />
A self-priming, waterbased, water potable<br />
high-build epoxy coating system. It offers<br />
excellent corrosion protection to a wide<br />
variety of substrates in the minimum number<br />
of coats.Its superior adhesion properties allow<br />
it to be applied over marginally prepared<br />
rusted steel surfaces and the solids content<br />
allows the coating to be applied over existing<br />
coatings without lifting and wrinkling. It is<br />
solvent free and VOC compliant. Also<br />
suitable for potable water applications.<br />
• Bridges, machinery, structural steel.<br />
• Tank linings (steel or concrete).<br />
• Green concrete surface compatible.<br />
• Tank and piping interior linings.<br />
• Mining structures.<br />
• Metal roofing.<br />
• Offshore equipment, marine environments.<br />
STEELMASTIC<br />
168<br />
An industry standard, surface tolerant,<br />
self-priming, direct-to-rust, high build epoxy<br />
mastic coating. Its superior adhesion properties<br />
allow it to be applied over marginally prepared<br />
rusted steel and old existing coatings.<br />
• Excellent maintenance coating for bridges, pipes, fences,<br />
machinery, structural steel or tank exteriors, especially<br />
when corrosion of the steel has taken place.<br />
• Ideal for offshore structures, marine piping and exposed<br />
steel structures.<br />
SOLIDGUARD 88<br />
A rapid curing, surface tolerant, chemical<br />
resistant high solids epoxy primer,<br />
intermediate or finish coating for application<br />
onto steel surfaces. Solidguard 88 provides<br />
excellent adhesion and corrosion protection<br />
to mild steel.<br />
• Ideal for protection of steel tanks, equipment bases,<br />
floors and drains against aggressive chemicals.<br />
• Tank farms and chemical storage tanks ideal in Petroleum<br />
Plants, sugar industry etc.<br />
• Priming of steel prior to applying ceramic tiles for added<br />
corrosion protection.<br />
SOLIDGUARD<br />
HCP<br />
An extremely high chemical resistant<br />
Bisphenol. A ceramic coating that is<br />
specifically designed for demanding acid<br />
or highly alkaline environments. Available in<br />
various colours offering high abrasion and<br />
scratch resistance.<br />
• Ideal for protection of concrete tanks, equipment bases,<br />
floors and drains against aggressive chemicals in extreme<br />
environments.<br />
• Tank farms and chemical storage tanks and petroleum<br />
tanks.<br />
• Acid bunds, tank linings.<br />
• Chemical loading bays.<br />
SOLIDKOTE UVC<br />
Solidkote UVC is a two component , aliphatic<br />
polyurethane with excellent UV stablility. It offers<br />
a high gloss finish. Its weather resistance<br />
and ability to resist chalking is outstanding.<br />
The product displays excellent flexibility, high<br />
abrasion, acid alkali and solvent resistance.<br />
• Interior or exterior application.<br />
• For use on concrete floors, structural steel, waste water<br />
facilities, chemical plants as well as marine application<br />
above water-line.<br />
• Ideal coating where outstanding colour and gloss<br />
retention is mandated.<br />
• Do not apply over wet / damp surfaces. Ensure a<br />
complete, dry seal of walls.
PRODUCT GROUP<br />
CONCENTRATION<br />
%<br />
TEMPERATURE<br />
0<br />
C<br />
A b C D E<br />
Acetic Acid<br />
10 60 NR NR NR NR VG<br />
30 20 NR NR E NR VG<br />
blood – – E E E E E<br />
Calcium Chloride – – E E E E E<br />
Calcium<br />
Hydroxide<br />
30 – E E E E E<br />
Citric Acid 30 20 E F E E E<br />
Copper Sulphate 30 20 E E E E E<br />
Formic Acid<br />
30 20 NR NR E NR E<br />
98 20 NR NR F NR F<br />
Petrol – – E E E E E<br />
Hydrofluoric Acid 48 20 NR NR E NR E<br />
Hydrogen<br />
Peroxide<br />
100 20 G F E E E<br />
Lactic Acid 90 20 NR NR E NR E<br />
Nitric Acid<br />
30 20 NR NR E NR E<br />
69 20 NR NR NR NR NR<br />
Abbreviations<br />
Phosphoric Acid<br />
5 20 E NR E VG E<br />
50 20 E NR E E E<br />
Skydrol A500 – – E NR E E E<br />
Sodium<br />
Hydroxide<br />
50 20 E E E E E<br />
50 60 NR NR NR NR VG<br />
5 20 E NR E F E<br />
Sulphuric Acid<br />
30 20 G NR G NR G<br />
98 20 NR NR NR NR NR<br />
Potassium<br />
Hydroxide<br />
10 100 E E E E E<br />
50 20 E E E E E
P O L Y S C R E E D<br />
Corrolam<br />
solidguard
TECHNICAL FINISHES COMPANY PROFILE:<br />
Technical Finishes have been leaders in the field of surface preparation and<br />
protection since 1989. We specialise in Industrial Flooring materials branching into<br />
Commercial and residential market sectors too. Technical Finishes have developed<br />
a reputation for delivering high performance, technically advanced, durable and<br />
HACCP compliant flooring systems as required by our client’s demands, promptly<br />
and effectively.<br />
We pride ourselves in being able to provide solutions for the most corrosive<br />
environments and conditions such as harsh chemical areas and acid exposure. Our<br />
product also comply to various legal requirements specific to an industryie: Food<br />
and beverage, pharmaceutical etc.<br />
The company currently employs over 80 people on a national basis and offers<br />
exclusive training of our products to our approved applicators and well as<br />
technical support to our <strong>small</strong>er clients handling residential and commercial<br />
flooring applications. Site support is also offered to construction houses and<br />
building contractors.<br />
We pride ourselves in fast turnaround times for our products due to local<br />
manufacture. Our team of dedicated industrial chemists keeps us abreast to<br />
serve a rapidly developing and changing market environment. We pride<br />
ourselves in continually investing in research and development of new<br />
technologies and trends, and providing on-going training and skills<br />
development to our staff.<br />
We have three fully equipped manufacturing units based in Gauteng, Kwazulu<br />
Natal and the Western Cape which are fully ISO 9001 certified enabling us to<br />
better serve the Southern African region. We are proudly South African.<br />
Our product range covers the following markets:<br />
<br />
<br />
<br />
<br />
<br />
<br />
Industrial Flooring<br />
Commercial Flooring<br />
Residential Flooring<br />
Concrete repair<br />
Waterproofing<br />
Cleaning Chemicals<br />
Visit our website on www.technicalfinishes.com or contact us directly on ….
Mining Products<br />
INDEX<br />
Technical Finishes<br />
Equivalent<br />
Coatings<br />
1. Solidguard 88 Nordcoat 6<br />
Eposhield HCP<br />
Nordcoat 1 Special<br />
Eposhield ST<br />
Nordcoat 2 + ¼<br />
Corrolam VEP GL<br />
Wearing Compounds<br />
2. Solidguard LV wearkote Brushable wearing compound<br />
Solidfix FS Fast set wearing compound Fixwear FS<br />
Solidwear ST standard set<br />
Nordtile<br />
Solidwear HP 100<br />
Solidwear HP 500 Nordwear 5<br />
Solidwear HP 800 Nordwear 8<br />
Adhesives<br />
3. Solidbond 110<br />
Solidbond QSP<br />
Screeds<br />
4. Solidscreed 49 Damp tolerant and chemical resistant epoxy screed<br />
Solidscreed LW Light weight epoxy screed for repairs<br />
Backing Compounds<br />
5. Solidback HP High performance backing<br />
Solidback ST<br />
Standard backing
TECHNICAL DATA SHEET<br />
SOLIDGUARD 88<br />
11 August 2016, Rev 2<br />
SOLIDGUARD 88<br />
Chemical resistant epoxy steel primer or Top coat<br />
DESCRIPTION<br />
Solidguard 88 is a rapid curing chemical resistant high solids epoxy primer or top coat.<br />
Provides excellent adhesion and corrosion protection to mild steel. Can be used as a primer<br />
, intermediate or finish coat on steel and has excellent recoat window for overcoating with<br />
epoxy or polyurethane topcoats. Ideal for tanks exposed to extreme conditions in the pulp<br />
and paper industry, water pipes sugar industry,mining industry, petroleum industry, Acid<br />
processing plants and tank farms, etc<br />
Benefits:<br />
Excellent adhesion to steel.<br />
Low temperature cure.<br />
Extremely tough and crack resistant.<br />
Excellent corrosion barrier.<br />
Uses:<br />
<br />
<br />
<br />
<br />
Ideal for protection of steel tanks, equipment bases, floors and drains against<br />
aggressive chemicals.<br />
Protection of steel water pipes.<br />
Tank farms and chemical storage tanks.<br />
Priming of steel prior to applying ceramic tiles for added corrosion protection.<br />
Substrate requirements:<br />
Surfaces to be coated must be clean and free of dust, oily residues and loose friable<br />
material. All steel surfaces to be abrasive blast cleaned to SA2.5 ( ISO 8501-1:2007). If<br />
oxidation has occurred between blasting and application, the surface must be reblasted.<br />
Surface defects revealed by blasting , should be ground and filled with Solidbond 120<br />
epoxy paste.<br />
Application:<br />
This is a specialized system that must be installed by an approved applicator .<br />
Mixing: Materials are supplied as 2 components. Epoxy Part A and Hardener Part B. Mix<br />
ratio is 4:1 by volume.<br />
Add components together and mechanically mix for 2 minutes. Use within 60<br />
minutes.<br />
Application: Short hair mohair roller or airless spray. If airless spray is used recommended<br />
spray nozzle is 15 – 21 thou or 0.38 – 0.53mm with 2000 psi pressure.<br />
Thinners: Only use approved epoxy thinners if necessary.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDGUARD 88<br />
11 August 2016, Rev 2<br />
TECHNICAL DETAILS:<br />
Application : Roller or Spray<br />
Chemical resistance : Consult Technical finishes’ technical department for details.<br />
Profile<br />
: Smooth<br />
Finish<br />
: Gloss<br />
Solids : 70%<br />
Application Temp : 5 - 30ºC<br />
Spread rate : 8 sqm/litre<br />
Dry film thickness : 80 micron<br />
Surface dry at 25 deg C : 45 min<br />
Over coat<br />
: min 6hrs : Max 7days<br />
Dry Film Thickness : 80 microns at 8sqm/L<br />
Mix Ratio<br />
: 4:1 by volume<br />
Colour<br />
: Red<br />
Health and safety: They system contains styrene and all appropriate PPE must be worn.<br />
Please consult Health and Safety Data sheets for each product.<br />
Technical Finishes products are guaranteed against defective materials and are<br />
manufactured under high quality standards and are sold subject to its standard Terms and<br />
Conditions of Sale, copies of which can be obtained on request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
Eposhield HCP<br />
11 August 2016, Rev 2<br />
EPOSHIELD HCP<br />
Chemical resistant EPOXY lining resin<br />
DESCRIPTION<br />
Eposhield HCP is an extremely chemical resistant Bisphenol-A resin that is specifically designed<br />
for demanding acid or highly alkaline environments. Also excellent use in Petroleum storage<br />
tanks. It is applied as a roller coat on steel tanks or in combination with Glass fiber reinforcing<br />
membrane and chemical resistant C glass veil for optimum chemical resistance. Ideal for tanks<br />
exposed to extreme conditions in the pulp and paper industry, sugar industry, petroleum industry,<br />
Acid processing plants and tank farms, etc<br />
Benefits:<br />
Excellent chemical resistance to a wide variety of corrosive environments.<br />
High mechanical properties .<br />
Extremely tough and crack resistant.<br />
Excellent scratch and mar resistance / easy to clean.<br />
Low odour.<br />
Thermal shock resistant.<br />
Uses:<br />
<br />
<br />
<br />
<br />
<br />
Ideal for protection of concrete tanks, equipment bases, floors and drains against aggressive<br />
chemicals.<br />
Tank farms and chemical storage tanks.<br />
Acid bunds, tank linings.<br />
Chemical loading bays.<br />
Chemical resistant to 50% Sulphuric acid, 20% HCL , 5% Acetic acid, 30% Sodium<br />
Hyroxide.<br />
Substrate requirements:<br />
Surfaces to be coated must be clean and free of dust, oily residues and loose friable material. All<br />
surfaced to be suitably prepared using grinders, shot blasting or scarifiers to remove laitance.<br />
Substrate must be a concrete screed Grade 2 evenness and must be a minimum of 20MPa<br />
compressive strength and must have a tensile pull off exceeding 1.5 Mpa. The substrate should be<br />
dry to 75% RH (BS 8204) and free from rising damp or ground water pressure.<br />
Prime with Solidkote STP primer.<br />
Application:<br />
This is a specialized system that must be installed by an approved applicator with documented<br />
quality assurance. Consult Technical Finishes for list of approved applicators.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
Eposhield HCP<br />
11 August 2016, Rev 2<br />
TECHNICAL DETAILS:<br />
Application<br />
: Roller<br />
Chemical resistance : Consult Technical finishes’ technical department for details.<br />
Profile<br />
: Smooth<br />
Typical Laminate Properties<br />
Finish : Gloss Glass content: 33% (2 x 450 GSM glass cloth)<br />
Application Temp : 5 - 30ºC Tensile strength:> 125 Mpa ISO 527-1993<br />
Service Temperature : 110 ºC max dry Tensile Modulus: > 7800 MPa<br />
Dry Film Thickness : 1 - 3mm system Flexural strength: > 200 MPa ISO 178-2001<br />
Colour<br />
: Various<br />
Walk on time : 12hrs at 20 ºC<br />
Full cure<br />
: 3 days<br />
System details : Primer Solidkote STP primer and Eposhield HCP and Eposhield HCP<br />
top coat. Detailed application instructions are available upon request.<br />
Health and safety: They system contains styrene and all appropriate PPE must be worn. Please<br />
consult Health and Safety Data sheets for each product.<br />
Technical Finishes products are guaranteed against defective materials and are manufactured<br />
under high quality standards and are sold subject to its standard Terms and Conditions of Sale,<br />
copies of which can be obtained on request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
Eposhield ST<br />
11 August 2016, Rev 2<br />
EPOSHIELD ST<br />
SURFACE TOLERANT EPOXY<br />
DESCRIPTION<br />
Eposhield ST is an extremely chemical resistant EPOXY resin that is specifically designed for<br />
demanding applications such as green concrete or high humid conditions. Also excellent use in<br />
Petroleum storage tanks, Chemical bund areas , breweries , acid plants , sugar mills etc It is applied<br />
as a roller coat on steel or concrete tanks or in combination with Glass fiber reinforcing membrane<br />
and chemical resistant C glass veil for optimum chemical resistance. Ideal for tanks exposed to<br />
extreme conditions in the pulp and paper industry, sugar industry, petroleum industry, Acid<br />
processing plants and tank farms, etc<br />
Benefits:<br />
Excellent chemical resistance to a wide variety of corrosive environments.<br />
Can be applied in 98% humidity<br />
High mechanical properties .<br />
Extremely tough and crack resistant.<br />
Excellent scratch and mar resistance / easy to clean.<br />
Low odour.<br />
Thermal shock resistant.<br />
Uses:<br />
<br />
<br />
<br />
<br />
<br />
Ideal for protection of concrete tanks, equipment bases, floors and drains against aggressive<br />
chemicals.<br />
Tank farms and chemical storage tanks.<br />
Acid bunds, tank linings.<br />
Chemical loading bays.<br />
Chemical resistant to 50% Sulphuric acid, 20% HCL , 5% Acetic acid, 30% Sodium<br />
Hyroxide.<br />
Substrate requirements:<br />
Surfaces to be coated must be clean and free of dust, oily residues and loose friable material. All<br />
surfaced to be suitably prepared using grinders, shot blasting or scarifiers to remove laitance.<br />
Substrate must be a concrete screed Grade 2 evenness and must be a minimum of 20MPa<br />
compressive strength and must have a tensile pull off exceeding 1.5 Mpa. The substrate should be<br />
dry to 75% RH (BS 8204) and free from rising damp or ground water pressure.<br />
Prime with Solidkote STP primer.<br />
Application:<br />
This is a specialized system that must be installed by an approved applicator with documented<br />
quality assurance. Consult Technical Finishes for list of approved applicators.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
Eposhield ST<br />
11 August 2016, Rev 2<br />
TECHNICAL DETAILS:<br />
Application<br />
: Roller<br />
Chemical resistance : Consult Technical finishes’ technical department for details.<br />
Profile<br />
: Smooth<br />
Typical Laminate Properties<br />
Finish : Gloss Glass content: 33% (2 x 450 GSM glass cloth)<br />
Application Temp : 5 - 30ºC Tensile strength: > 125 Mpa ISO 527-1993<br />
Service Temperature : 110 ºC max dry Tensile Modulus: > 7800 MPa<br />
Dry Film Thickness : 1 - 3mm system Flexural strength: > 200 MPa ISO 178-2001<br />
Colour<br />
: Various<br />
Walk on time : 12hrs at 20 ºC<br />
Full cure<br />
: 3 days<br />
System details : Prime using same resin<br />
Detailed application instructions are available upon request.<br />
Health and safety: They system contains styrene and all appropriate PPE must be worn. Please<br />
consult Health and Safety Data sheets for each product.<br />
Technical Finishes products are guaranteed against defective materials and are manufactured<br />
under high quality standards and are sold subject to its standard Terms and Conditions of Sale,<br />
copies of which can be obtained on request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
Corrolam VEP GL<br />
11 August 2016, Rev 2<br />
CORROLAM VEP GL<br />
Chemical resistant vinyl ester laminating resin<br />
DESCRIPTION<br />
Corrolam VEP RC is an extremely chemical resistant Bisphenol-A epoxy vinyl ester resin that is<br />
specifically designed for demanding acid or highly alkaline environments. It is applied in<br />
combination with Glass fiber and chemical resistant C glass veil for optimum chemical reistance.<br />
Ideal for tanks exposed to extreme conditions in the pulp and paper industry , sugar industry,<br />
petroleum industry, Flue gas scrubbers, Ozone and bleaching tanks etc<br />
Benefits :<br />
Fast curing<br />
Excellent chemical resistance to a wide variety of corrosive environments.<br />
High mechanical properties .<br />
Extremely tough and crack resistant.<br />
Excellent scratch and mar resistance / easy to clean.<br />
Thixotropic resin<br />
Thermal shock resistant.<br />
Uses :<br />
Ideal for protection of concrete walls, equipment bases, floors and drains against aggressive<br />
chemicals.<br />
Thermal resistant.<br />
Acid bunds, tank linings .<br />
Chloride dioxide tanks, Flue gas scrubbers, Acid and alkali tanks.<br />
Substrate requirements:<br />
Surfaces to be coated must be clean and free of dust, oily residues and loose friable material. All<br />
surfaced to be suitably prepared using grinders, shot blasting or scarifiers to remove laitance.<br />
Substrate must be a concrete screed Grade 2 evenness and must be a minimum of 20MPa<br />
compressive strength and must have a tensile pull off exceeding 1.5 Mpa. The substrate should be<br />
dry to 75% RH (BS 8204) and free from rising damp or ground water pressure.<br />
Application :<br />
This is a specialized system that must be installed by an approved applicator with documented<br />
quality assurance. Consult Technical Finishes for list of approved applicators.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
Corrolam VEP GL<br />
11 August 2016, Rev 2<br />
TECHNICAL DETAILS:<br />
Application : Roller Chemical resistance:Consult Technical finishes’technical dept for details.<br />
Profile : Smooth Typical Laminate Properties<br />
Finish : Gloss Glass content 33%<br />
Application Temp : 5 - 30ºC Tensile strength : > 125 Mpa ISO 527-1993<br />
Service Temperature: 110 ºC max dry Tensile Modulus > 7800 MPA<br />
Dry Film Thickness: 0.5mm - 1mm system Flexural strength : > 200 MPa ISO 178-2001<br />
Colour<br />
: Various<br />
Walk on time : 12hrs at 20 degC<br />
Full cure : 3 days<br />
System details : Primer VEP and Corrolam RC top coat. Detailed application instructions<br />
are available upon request.<br />
Health and safety: They system contains styrene and all appropriate PPE must be worn. Please<br />
consult Health and Safety Data sheets for each product.<br />
Technical Finishes products are guaranteed against defective materials and are manufactured<br />
under high quality standards and are sold subject to its standard Terms and Conditions of Sale,<br />
copies of which can be obtained on request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDGUARD LV WEARKOTE<br />
17 August 2016, Rev 2<br />
SOLIDGUARD LV WEARKOTE<br />
BRUSHABLE WEARING COMPOUND<br />
DESCRIPTION<br />
Solidguard LV wearkote is a high performance Silicon Carbide filled ceramic epoxy using new<br />
generation epoxy technology to combine high impact resistance with abrasion and excellent<br />
corrosion resistance. Designed as a brushable grade wearing compound .<br />
Benefits:<br />
Easy to apply with brush.<br />
Self priming on shot blasted steel with excellent adhesion.<br />
Chemical resistance to concentrated acids and alkalis.<br />
Hard wearing and resistant to abrasive slurries.<br />
Smooth gloss finish which eliminates “hang up” and turbulence in pump cases and pipes<br />
Solvent free and non flammable .<br />
High physical properties.<br />
100% reactive, no solvents<br />
Uses:<br />
<br />
<br />
<br />
Recommended for abrasion resistant coating to pipes and pump casings including<br />
impellers.<br />
Protection of slurry chutes , separators and slurry tanks.<br />
Tank linings where continuous agitation causes erosion of steel.<br />
Substrate requirements:<br />
Surfaces to be coated must be clean and free of oily residues and loose rust . Recommended<br />
surface profile is a sweep blast with surface finish of Sa 2.5. BS 7079 Part A1 1989 with surface<br />
profile 75 micron.<br />
Application:<br />
This is a specialized system that must be installed by an approved applicator with documented<br />
quality assurance. Consult Technical Finishes for list of approved applicators.<br />
TECHNICAL DETAILS:<br />
Application : Brushable Compressive: > 80mPa (BS6319)<br />
Profile : Smooth Flexural Strength: > 30mPa (BS6319)<br />
Finish : Gloss Bond strength: > 7 MPa on shot blasted steel<br />
Application Temp : 8 - 30ºC<br />
Tensile strength: 15mPa (BS6319)<br />
Service Temperature : 80 ºC max dry<br />
Dry Film Thickness: 1mm system 2 coats<br />
Colour : dark grey<br />
Initial cure : 4hrs at 20 ºC<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDGUARD LV WEARKOTE<br />
17 August 2016, Rev 2<br />
Mix ratio<br />
Practical cure<br />
Full cure<br />
Pot life<br />
Overcoat time<br />
Coverage<br />
: mix as supplied.<br />
: 18hrs<br />
: 7 days<br />
: 17 -20 min. at 20 degC<br />
: 4 – 5 hrs<br />
: 1.8sqm/ 1.5kg kit at 500 microns. Recommend 2 coats<br />
Health and safety: The system is non hazardous to health and environment. Please consult<br />
Health and Safety Data sheets for each product.<br />
Technical Finishes products are guaranteed against defective materials and are manufactured<br />
under high quality standards and are sold subject to its standard Terms and Conditions of Sale,<br />
copies of which can be obtained on request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDFIX FS WEARING COMPOUND<br />
17 August 2016, Rev 2<br />
SOLIDFIX FS WEARING COMPOUND<br />
High Performance FAST SET Wearing Compound<br />
DESCRIPTION<br />
Solidfix FS is a fast set high performance technically advanced wearing compound containing<br />
graded hi Alumina ceramic fillers, held uniformly in suspension in a blended high performance<br />
resin system to provide a long lasting lining to plant and equipment subject to a high degree of<br />
abrasive wear. It is ideal for protecting high wearing areas caused by fine slurries. Contains fine<br />
crushed angular Aluminium Oxide for optimum wear and packing density.<br />
Benefits:<br />
Excellent acid and alkali resistance.<br />
Fast set , cuts down time to a minimum, as most repairs are done on site.<br />
Extends life of costly plant and components.<br />
Easy to mix and apply. It conforms and spreads easily into tight corners and curved surfaces.<br />
Can be applied to vertical and overhead surfaces and areas in which compound shapes or difficult<br />
access make the application of other wearing materials impractical.<br />
Water smoothable – Lightly wetting trowel or gloved hand gives a smooth finish. Rapid<br />
Cure- Normally ready to use in 6 hrs hours at 25 deg C- less if heat is applied.<br />
Excellent adhesion to metal and other surfaces under adverse conditions including damp<br />
surfaces.<br />
Good low temperature cure down to 5 Degrees C and excellent corrosion resistance.<br />
Uses:<br />
Any plant and equipment subject to erosion caused by abrasion from process materials. Common<br />
areas of application are feed chutes, spigots, pipe elbows, slurry lines, hoppers, chests, settling<br />
tanks, cyclones pump casings ect.<br />
Substrate requirements:<br />
Surfaces to be clean, dry and free of rust or mill scale. Grit blasting SA2.5 is recommended. If<br />
mechanical grinding is used ensure that prepared surface has a rough profile.<br />
Application:<br />
Using a steel trowel or gloved hand apply compound at 4mm-6mm thickness or as specified.<br />
Wipe smooth with hands, which are slightly wet with soapy water.<br />
Any mixed material will become unusable after 40 minutes.<br />
To accelerate curing time post cure after compound has gardened by heating to about 40 Degrees<br />
C for 30<br />
minutes.<br />
Resistance<br />
Resists dilute acids and alkalis, aliphatic solvents and petroleum products, seawater and distilled<br />
water.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDFIX FS WEARING COMPOUND<br />
17 August 2016, Rev 2<br />
TECHNICAL DETAILS:<br />
No of components : 2<br />
Chemical resistance : Acids and alkalis, aliphatic solvents and petroleum products<br />
Mixing Ratio by volume: 2:1 by volume<br />
Pot Life (500ml) : 15 – 17 min at 25 degC<br />
Touch Dry<br />
: 1 hours<br />
Practical cure : 2 - 3 hours<br />
Full Cure<br />
: 18hrs<br />
Apply by<br />
: Trowel or gloved hand<br />
Theoretical Coverage : 6 ltr/m2 at 6mm<br />
Hardness : Shore D 85<br />
Compressive Strength : 100 Mpa ASTM D-695-54<br />
Tensile Strength : 35 Mpa<br />
Lap shear<br />
: > 13 Mpa<br />
Heat Deflection Temp : 70 Degrees C<br />
Volume Solids : 100%<br />
Application Temp : Minimum 5 Degrees C & Maximum 35 Degrees C<br />
Cleaner<br />
: Epoxy Thinners<br />
Shelf Life<br />
: 12 month<br />
Health and safety:<br />
All PPE must be worn at all times. Please consult the relevant Health & Safety Data Sheet available from<br />
Technical Finishes KZN on request and sent with each delivery.<br />
Safety Precautions:<br />
Ensure adequate ventilation in work area. Use protective clothing to avoid skin contact with uncured<br />
compound at all times. No sparks or naked flame to be permitted in the vicinity while tools and equipment<br />
are being cleaned with Epoxy Thinners or other flammable products.<br />
Important Note<br />
Technical Finishes products are guaranteed against defective materials and manufacture and are sold<br />
subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDWEAR HP 100<br />
1 July 2016, Rev 2<br />
SOLIDWEAR HP 100<br />
High Performance Epoxy Wearing Compound<br />
DESCRIPTION<br />
Solidwear HP100 is a high performance technically advanced epoxy wearing compound containing<br />
graded hi Alumina ceramic bead fillers, held uniformly in suspension in a blended high<br />
performance epoxy resin system to provide a long lasting lining to plant and equipment subject to<br />
a high degree of abrasive wear.<br />
Benefits:<br />
Excellent acid resistance > 70% Sulphuric acid. Strong acid blends typically used in mine<br />
processing.<br />
Cuts down time to a minimum, as most repairs are done on site.<br />
Extends life of costly plant and components.<br />
Easy to mix and apply. It conforms and spreads easily into tight corners and curved surfaces.<br />
Can be applied to vertical and overhead surfaces and areas in which compound shapes or difficult<br />
access make the application of other wearing materials impractical.<br />
Water smoothable – Lightly wetting trowel or gloved hand gives a smooth finish. Rapid<br />
Cure- Normally ready to use in 12 hrs hours at normal room temperature- less if heat is<br />
applied.<br />
Excellent adhesion to metal and other surfaces under adverse conditions including damp<br />
surfaces.<br />
Good low temperature cure down to 5 Degrees C and excellent corrosion resistance.<br />
Uses:<br />
Any plant and equipment subject to erosion caused by abrasion from process materials. Common<br />
areas of application are feed chutes, spigots, pipe elbows, slurry lines, hoppers, chests, settling<br />
tanks, cyclones pump casings ect.<br />
Substrate requirements:<br />
Surfaces to be clean, dry and free of rust or mill scale. Grit blasting is recommended. If mechanical<br />
grinding is used ensure that prepared surface has a rough profile.<br />
Application:<br />
Using a steel trowel or gloved hand apply compound at 4mm-6mm thickness or as specified.<br />
Wipe smooth with hands, which are slightly wet with soapy water.<br />
Any mixed material will become unusable after 40 minutes.<br />
To accelerate curing time post cure after compound has gardened by heating to about 40 Degrees<br />
C for 30<br />
minutes.<br />
Resistance<br />
Resists dilute acids and alkalis, aliphatic solvents and petroleum products, seawater and distilled<br />
water.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDWEAR HP 100<br />
1 July 2016, Rev 2<br />
TECHNICAL DETAILS:<br />
No of components : 2<br />
Chemical resistance : Mineral Acids and alkalis, aliphatic solvents and petroleum products<br />
Mixing Ratio by mass : 8.05 kg: 0.45 kg<br />
Epoxy: Activator<br />
Pot Life (500ml) : 25-30 min<br />
Touch Dry<br />
: 1 hours<br />
Practical cure : 2 - 3 hours<br />
Full Cure<br />
: 18hrs<br />
Apply by<br />
: Trowel or gloved hand<br />
Theoretical Coverage : 6 ltr/m2 at 6mm<br />
Compressive Strength : 100 Mpa ASTM D-695-54<br />
Tensile Strength : 35 Mpa<br />
Lap shear<br />
: > 13 Mpa<br />
Heat Deflection Temp : 80 Degrees C<br />
Volume Solids : 100%<br />
Application Temp : Minimum 5 Degrees C & Maximum 35 Degrees C<br />
Cleaner<br />
: Epoxy Thinners<br />
Shelf Life<br />
: 12 month<br />
Health and safety:<br />
Some of the components of this product may be hazardous during mixing and application. Please<br />
consult the relevant Health & Safety Data Sheet available from Technical Finishes KZN on<br />
request and sent with each delivery.<br />
Safety Precautions:<br />
Ensure adequate ventilation in work area. Use protective clothing to avoid skin contact with<br />
uncured compound at all times. No sparks or naked flame to be permitted in the vicinity while<br />
tools and equipment are being cleaned with Epoxy Thinners or other flammable products.<br />
Important Note<br />
Technical Finishes products are guaranteed against defective materials and manufacture and are<br />
sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on<br />
request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDWEAR HP 500<br />
11 August 2016, Rev 2<br />
SOLIDWEAR HP 500<br />
WEARING COMPOUND<br />
High Performance standart set Wearing Compound<br />
10kg Part number: 4KSWHP5KIT10<br />
DESCRIPTION<br />
SolidWEAR HP 500 is a quick set high performance technically advanced wearing compound<br />
containing graded high density ceramic fillers, providing excellent wear resistance, impact and<br />
chemical resistance a long lasting lining to plant and equipment subject to a high degree of abrasive<br />
wear. It is ideal for protecting high wearing areas caused by fine slurries. Contains fine crushed<br />
angular fillers for optimum packing and wear resistance.<br />
Benefits:<br />
Excellent acid ( up to 50% Sulphuric acid ) and alkali resistance.<br />
Extends life of costly plant and components.<br />
Easy to mix and apply. It conforms and spreads easily into tight corners and curved surfaces.<br />
Can be applied to vertical and overhead surfaces and areas in which compound shapes or difficult<br />
access make the application of other wearing materials impractical.<br />
Water smoothable – Lightly wetting trowel or gloved hand gives a smooth finish. Rapid<br />
Cure- Normally ready to use in 18 hrs hours at 25 deg C- less if heat is applied.<br />
Excellent adhesion to metal and other surfaces under adverse conditions including damp<br />
surfaces.<br />
Good low temperature cure down to 5 Degrees C and excellent corrosion resistance.<br />
Uses:<br />
Any plant and equipment subject to erosion caused by abrasion from process materials. Common<br />
areas of application are feed chutes, spigots, pipe elbows, slurry lines, hoppers, chests, settling<br />
tanks, cyclones pump casings ect.<br />
Substrate requirements:<br />
Surfaces to be clean, dry and free of rust or mill scale. Grit blasting SA2.5 is recommended. If<br />
mechanical grinding is used ensure that prepared surface has a rough profile.<br />
Application:<br />
Using a steel trowel or gloved hand apply compound at 4mm-6mm thickness or as specified.<br />
Wipe smooth with hands, which are slightly wet with soapy water.<br />
Any mixed material will become unusable after 40 minutes.<br />
To accelerate curing time post cure after compound has gardened by heating to about 40 Degrees<br />
C for 30<br />
minutes.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 5 Progress Rd, New Germany, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDWEAR HP 500<br />
11 August 2016, Rev 2<br />
Resistance<br />
Resists dilute acids and alkalis, aliphatic solvents and petroleum products, seawater and distilled<br />
water.<br />
TECHNICAL DETAILS:<br />
No of components : 2<br />
Kit size<br />
: 10 kg<br />
Coverage<br />
: 1sqm at 4.5 mm<br />
Mixing Ratio by volume : 2:1 by volume<br />
Pot Life (500ml) : 25 - 30 min at 25 degC<br />
Working time : 45 min.<br />
Practical cure : 2 - 3 hours<br />
Full Cure<br />
: 18hrs<br />
Apply by<br />
: Trowel or gloved hand<br />
Hardness : Shore D 85<br />
Compressive Strength : 100 Mpa ASTM D-695-54<br />
Tensile Strength : 35 Mpa<br />
Lap shear<br />
: > 13 Mpa<br />
Heat Deflection Temp : 90 Degrees C<br />
Volume Solids : 100%<br />
Chemical resistance : Acids and alkalis, aliphatic solvents and petroleum products<br />
Application Temp : Minimum 5 Degrees C & Maximum 35 Degrees C<br />
Shelf Life<br />
: 12 month<br />
Health and safety:<br />
All PPE must be worn at all times. Please consult the relevant Health & Safety Data Sheet<br />
available from Technical Finishes KZN on request and sent with each delivery.<br />
Safety Precautions:<br />
Ensure adequate ventilation in work area. Use protective clothing to avoid skin contact with<br />
uncured compound at all times. No sparks or naked flame to be permitted in the vicinity while<br />
tools and equipment are being cleaned with Epoxy Thinners or other flammable products.<br />
Important Note<br />
Technical Finishes products are guaranteed against defective materials and manufacture and are<br />
sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on<br />
request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 5 Progress Rd, New Germany, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDWEAR HP 800<br />
18 August 2016, Rev 2<br />
SOLIDWEAR HP 800<br />
WEARING COMPOUND<br />
High Performance Wearing Compound<br />
10kg Part number: 4KSWHP8KIT10<br />
DESCRIPTION<br />
SolidWEAR HP 500 is a superior high performance technically advanced wearing compound<br />
using Novalac resin technology for superior temperature, chemical and wear resistance, It<br />
contains graded high density ceramic fillers creating a “bed” of ceramic for excellent wear<br />
resistance, impact and chemical resistance.It is ideal for protecting high wearing containing<br />
acid slurries. Also suitable in Chrome reduction plants.<br />
Benefits:<br />
Excellent acid ( up to 70% Sulphuric acid )and alkali resistance.<br />
Extends life of costly plant and components.<br />
Easy to mix and apply. It conforms and spreads easily into tight corners and curved surfaces.<br />
Can be applied to vertical and overhead surfaces and areas in which compound shapes or<br />
difficult access make the application of other wearing materials impractical.<br />
• Water smoothable – Lightly wetting trowel or gloved hand gives a smooth finish.<br />
Rapid Cure- Normally ready to use in 18 hrs hours at 25 deg C- less if heat is applied.<br />
• Excellent adhesion to metal and other surfaces under adverse conditions including<br />
damp surfaces.<br />
• Good low temperature cure down to 5 Degrees C and excellent corrosion<br />
resistance.<br />
Uses:<br />
Any plant and equipment subject to erosion caused by abrasion from process materials.<br />
Common areas of application are feed chutes, spigots, pipe elbows, slurry lines, hoppers,<br />
chests, settling tanks, cyclones pump casings ect.<br />
Substrate requirements:<br />
Surfaces to be clean, dry and free of rust or mill scale. Grit blasting SA2.5 is recommended. If<br />
mechanical grinding is used ensure that prepared surface has a rough profile.<br />
Application:<br />
Using a steel trowel or gloved hand apply compound at 4mm-6mm thickness or as specified.<br />
Wipe smooth with hands, which are slightly wet with soapy water.<br />
Any mixed material will become unusable after 40 minutes.<br />
To accelerate curing time post cure after compound has gardened by heating to about 40<br />
Degrees C for 30<br />
minutes.<br />
Resistance<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705<br />
7733 Tel: +27 (0) 21 535<br />
4455
TECHNICAL DATA SHEET<br />
SOLIDWEAR HP 800<br />
18 August 2016, Rev 2<br />
Resists dilute acids and alkalis, aliphatic solvents and petroleum products, seawater and<br />
distilled water.<br />
TECHNICAL DETAILS:<br />
No of components : 2<br />
Kit size<br />
: 10 kg<br />
Coverage<br />
: 1sqm at 4.5 mm<br />
Mixing Ratio by volume : 2:1 by volume<br />
Pot Life (500ml) : 25 min at 25 degC<br />
Working time : 35 min.<br />
Practical cure : 2 - 3 hours<br />
Full Cure<br />
: 18hrs<br />
Apply by<br />
: Trowel or gloved hand<br />
Hardness : Shore D 90<br />
Compressive Strength : 110 Mpa ASTM D-695-54<br />
Tensile Strength : 35 Mpa<br />
Lap shear<br />
: > 13 Mpa<br />
Heat Deflection Temp : 90 Degrees C<br />
Chemical resistance : Acids and alkalis, aliphatic solvents and petroleum products<br />
Application Temp : Minimum 5 Degrees C & Maximum 35 Degrees C<br />
Shelf Life<br />
: 12 month<br />
Health and safety:<br />
All PPE must be worn at all times. Please consult the relevant Health & Safety Data Sheet<br />
available from Technical Finishes KZN on request and sent with each delivery.<br />
Safety Precautions:<br />
Ensure adequate ventilation in work area. Use protective clothing to avoid skin contact with<br />
uncured compound at all times. No sparks or naked flame to be permitted in the vicinity<br />
while tools and equipment are being cleaned with Epoxy Thinners or other flammable<br />
products.<br />
Important Note<br />
Technical Finishes products are guaranteed against defective materials and manufacture and<br />
are sold subject to its standard Terms and Conditions of Sale, copies of which can be<br />
obtained on request.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705<br />
7733 Tel: +27 (0) 21 535<br />
4455
TECHNICAL DATA SHEET<br />
SOLIDBOND 110SS<br />
30 June 2016, Rev 2<br />
SOLIDBOND 110 SS<br />
CERAMIC TILE PASTE ADHESIVE<br />
DESCRIPTION<br />
Solidbond 110 is a solvent free, STANDARD SET epoxy adhesive for bonding high<br />
alumina ceramics where chemical resistance is required. It may also be used for a wide<br />
range of adhesive applications where excellent adhesion and high chemical resistance is<br />
required.<br />
Benefits:<br />
Excellent adhesion on steel, ceramic , glass , concrete , GRP .<br />
Excellent chemical resistance.<br />
Damp tolerant<br />
Thixotropic and can be applied to vertical or overhead surfaces.<br />
Good temperature resistance. Up to 90 deg C<br />
Ease of mixing : 1:1 mix ratio.<br />
Substrate requirements:<br />
Surfaces to be treated must be free of dust, oily residues and loose friable material.<br />
TECHNICAL DETAILS:<br />
Appearance : Part A – Off white / Part B – brownish Physical Properties<br />
Pot life : 15 minutes Service Temperature : wet 60 deg C : Dry 90 deg C<br />
Set : 1 hour Tensile strength : > 50 Mpa<br />
Mix ratio : 1:1 by volume Compressive strength : > 75 mpa<br />
Full cure : 24 hours, cure is temp sensitive Bond strength ceramics > 13 Mpa<br />
Application temperature: 5 - 35 ºC<br />
Packaging : 2 L kits<br />
Health and safety: Epoxy products are to be treated with care. In the event of skin<br />
contact, was well with soap and warm water. Seek medical assistance immediately in<br />
case of eye contact. Please consult Health and Safety Data sheets for each product.<br />
Technical Finishes products are guaranteed against defective materials and are<br />
manufactured under high quality standards and are sold subject to its standard Terms and<br />
Conditions of Sale, copies of which can be obtained on request.<br />
Page 1 of 1<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead, 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDBOND QSP<br />
17 August 2016, Rev 2<br />
SOLIDBOND QSP<br />
Quick set paste adhesive<br />
DESCRIPTION<br />
Solidbond QSP is a solvent free, epoxy quick set epoxy adhesive for bonding ceramics, acid bricks,<br />
steel or concrete. It may also be used for a wide range of adhesive applications where rapid set<br />
and high chemical resistance is required.<br />
Benefits:<br />
Excellent chemical resistance – resists attack of petroleum products, acids and alkali.<br />
Fast curing<br />
Damp tolerant<br />
Thixotropic and can be applied to vertical or overhead surfaces.<br />
Good temperature resistance<br />
Ease of application<br />
Substrate requirements:<br />
Surfaces to be treated must be free of dust, oily residues and loose friable material.<br />
TECHNICAL DETAILS:<br />
Appearance : Part A – Off white / Part B – brownish Physical Properties<br />
Pot life : 15 - 20 minutes Service Temperature : wet 60 deg C : Dry 90 deg C<br />
Set : 1 hour Tensile strength : > 50 Mpa<br />
Mix ratio : 2:1 by volume Compressive strength : > 75 mpa<br />
Full cure : 24 hours, cure is temp sensitive Bond strength ceramics > 11 Mpa<br />
Application temperature : 5 - 35 ºC<br />
Packaging<br />
: 1.5 L kits<br />
Health and safety: Epoxy products are to be treated with care. In the event of skin contact, was<br />
well with soap and warm water. Seek medical assistance immediately in case of eye contact.<br />
Please consult Health and Safety Data sheets for each product.<br />
Technical Finishes products are guaranteed against defective materials and are manufactured<br />
under high quality standards and are sold subject to its standard Terms and Conditions of Sale,<br />
copies of which can be obtained on request.<br />
Page 1 of 1<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDBACK HP<br />
11 August 2016, Rev 2<br />
SOLIDBACK HP<br />
High performance backing<br />
DESCRIPTION<br />
Solidback HP - HI-PERFORMANCE BACKING is a 100% Solids reactive resin system<br />
for backing metal wear plates in large gyratory crushers and cone crushers. It offers<br />
excellent impact strength and resilience, together with high compression and tensile<br />
strengths. It is non-flammable, easy to mix and apply and on curing has no shrinkage which<br />
eliminates the gaps between backing and liners or support structures. Ideally suited to<br />
Chrome, Platinum, Manganese and Iron ores to improve liner life.<br />
BENIFITS<br />
Non Hazardous<br />
No molten zinc and peripheral equipment<br />
100% solids co-polymer system.<br />
Saves downtime and money.<br />
Tough and resilient.<br />
Easy and safe to use.<br />
PHYSICAL PROPERTIES (all at 25°)<br />
Compressive strength<br />
> 110Mpa Suitable for large Gyratory and Cone<br />
crushers<br />
Working time<br />
20 - 25 Minutes<br />
Gel time<br />
45 Minutes<br />
Operational time<br />
6 Hours<br />
Mixed colour<br />
Red<br />
Kit size<br />
20kg (12.4 litres)<br />
APPLICATION INSTRUCTIONS<br />
Store backing material and concaves between 10°C - 25°C for 24 hours prior to application.<br />
Backing surface of concaves should be free of rust, dirt, grease and oil.<br />
Place the first row of concaves and support them in the usual manner.<br />
Use wood strips around each concave to obtain even spacing.<br />
A light coating of release agent should be applied to all surfaces of the bowl or mantle to<br />
facilitate future removal of worn liners.<br />
N.B DO NOT APPLY RELEASE AGENT ONTO LINERS THEMSELVES<br />
Seal gaps between cancaves to prevent leakage with Solidfix TROWL MIX.<br />
If ambient temperatures are expected to be below 16°C, apply heat with torches between<br />
concaves and the shell to bring the temperature up to the specified level, preferably 32°C,<br />
but not more than 60°C.<br />
Premix resin in large pail for one minute using a low speed drill.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDBACK HP<br />
11 August 2016, Rev 2<br />
While stirring, add hardener contents from the <strong>small</strong> bottle at a slow continuous rate.<br />
Move stirrer up and down and around the sides of the pail until the contents are a uniform<br />
colour. Mix for three minutes.<br />
Pour the mixture at several locations around the concave ring.<br />
After the entire row is fully backed, more heat can be applied to the face side of the<br />
concaves to accelerate curing, while the next row of concaves is being installed.<br />
SAFE HANDLING PROCEDURES<br />
SAFETY WARNING<br />
Provide adequate ventilation and respirators<br />
Avoid inhaling fumes.<br />
Personnel are required to use airline respirators when torch cutting or grinding the product.<br />
Avoid contact with skin and eyes.<br />
STORAGE CONDITIONS<br />
Store indoors on pallets at temperatures between 10°C and 35°C<br />
PROTECTION<br />
All work is to be done in a well-ventilated area.<br />
Overalls and eye protection required.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDBACK ST<br />
11 August 2016, Rev 2<br />
SOLIDBACK ST<br />
Standard backing<br />
DESCRIPTION<br />
Solidback ST Standard Backing is tough, resilient and ideal for Cone Crusher<br />
Gyratory Crushers, Rotating Mills, Pulverisers and other heavy reduction machinery.<br />
Solidback ST will suit will many types of crushing operations. Suitable for 5 foot crushers<br />
and Gold, Copper and low strength ores.<br />
BENIFITS<br />
Non Hazardous<br />
No molten zinc and peripheral equipment<br />
100% solids co-polymer system.<br />
Saves downtime and money.<br />
Tough and resilient.<br />
Easy and safe to use.<br />
PHYSICAL PROPERTIES (all at 25°)<br />
Compressive strength<br />
In excess of 135 Mpa min<br />
Working time<br />
10 - 13 Minutes<br />
Gel time<br />
20 Minutes @25°C<br />
Operational time<br />
6 Hours<br />
Mixed colour<br />
Beige<br />
Kit size<br />
10kg and 20kg<br />
MIXING AND POURING INSTRUCTIONS FOR CONE CRUSHERS<br />
• Premix resin using a low speed power drill (400rpm max) for ± 2 minutes.<br />
• While stirring, it is important to move stirrer up and down and around the sides of the<br />
Pail to disperse resin evenly. Mix for ± 2 minutes. (Exercise mixing speeds cause air<br />
entrapment, resulting in foaming of the product).<br />
• Add hardener and mix for a further 2 minute or until a uniform colour is achieved.<br />
• Pour mixture at several locations to ensure even distribution of Solidback ST Backing<br />
material.<br />
• In high temperature regions, assembly and pouring of crushers should be done indoors<br />
to avoid overheating of components, which could result in uneven cured properties.<br />
Alternatively pours should take place in the early morning.<br />
• Avoid water contamination during mixing and pouring.<br />
Page 1 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
TECHNICAL DATA SHEET<br />
SOLIDBACK ST<br />
11 August 2016, Rev 2<br />
APPLICATION INSTRUCTIONS<br />
1. A light coating of release agent should be applied to all surfaces of the bowl of<br />
mantle to facilitate future removal of worn liners.<br />
N.B DO NOT APPLY RELEASE AGENT ONTO LINERS THEMSELVES<br />
2. Liners should be positioned in the Crusher in the normal manner and all gaps sealed<br />
to prevent leakage of the Solidback ST Backing during pouring.<br />
3. If ambient temperature is below 15°C, the liners as well as the bowl or mantle<br />
should be preheated to ±25°<br />
4. Where Crusher downtime is critical, curing time can be reduced by preheating<br />
contact surface to a maximum of 50°C.<br />
SAFETY WARNING<br />
Provide adequate ventilation and respirators<br />
Avoid inhaling fumes.<br />
Personnel are required to use airline respirators when torch cutting or grinding the product.<br />
Avoid contact with skin and eyes.<br />
STORAGE CONDITIONS<br />
Store indoors on pallets at temperatures between 10°C and 35°C<br />
PROTECTION<br />
All work is to be done in a well-ventilated area.<br />
Overalls and eye protection required.<br />
Page 2 of 2<br />
Gauteng Kwa-Zulu Natal Western Cape<br />
35 Activia Rd, Activia Park, Germiston, 1610 41 Circuit Rd, Westmead 3610 Cnr. Gunners Circle & Fisher Ave, Epping 1,<br />
7475<br />
Tel: +27 (0) 11 822 7242 Tel: +27 (0) 31 705 7733 Tel: +27 (0) 21 535 4455
MATERIAL SAFETY DATA SHEET<br />
SOLIDGUARD ACTIVATOR<br />
41 Circuit Road,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733<br />
EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDGUARD LV ACTIVATOR Chemical abstract no.: Not Available<br />
Chemical family: Blend<br />
NIOSH no.: Not Available<br />
Chemical name: Blend<br />
Hazchem code: Not Available<br />
Synonyms: EPOXY CURING AGENT UN no.: 1760<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Benzyl Alcohol 100-51-6 5 R36/37/38; R22 Xi<br />
Isophoronediamine (IPD) 2855-13-2 30 - 40 R36/37/38; R22 Xi<br />
Mixed amines 30 - 40 R 36/37/38 : R22 Xi<br />
3. HAZARDS IDENTIFICATION<br />
Main hazard: Possible skin and eye irritant<br />
Flammability: None<br />
Chemical hazard: None<br />
Biological hazard: None<br />
Reproductive hazard: None<br />
Health effects – eyes: Reddening, irritation<br />
Health effects – skin: Skin reddening, irritation<br />
Health effects – ingestion: Stomach ache, nausea and vomiting<br />
Health effects – inhalation: None<br />
Carcinogenicity: None Mutagenicity: None Neurotoxicity: None<br />
4. FIRST AID MEASURES<br />
Product in eye: Flush eyes with water and seek medical attention<br />
Product on skin: Flush with water and remove clothing. Seek medical advice if rash develops<br />
Product ingestion: DO NOT induce vomiting. Get immediate medical attention<br />
Product inhaled: Remove to fresh air. Seek medical advice if breathing becomes difficult<br />
5. FIRE FIGHTING MEASURES<br />
Extinguishing media: CO 2, Dry chemical, alcohol resistant foam<br />
Special hazards: May produce CO 2, ammonia gas or nitrogen oxide.<br />
Protective clothing: Self contained breathing apparatus.<br />
6. ACCIDENTAL RELEASE MEASURES<br />
Personal precautions: Wear protective clothing as indicated in section 8<br />
Environmental precautions: Do not discharge to natural water systems<br />
Small spills: Collect in a container for disposal and wash areas with clean water<br />
Large spills: Collect in containers for disposal. Rinse affected areas with clean water to effluent.<br />
7. HANDLING AND STORAGE<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 1 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDGUARD ACTIVATOR<br />
41 Circuit Road,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733<br />
EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Suitable material: Keep in original containers in well ventilated areas.<br />
Handling / storage precautions: Keep containers closed and in a dry place away from acids.<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: Keep below OEL with explosion proof ventilation.<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: Wear respirator if ventilation inadequate<br />
Personal protection – hand: Nitrile gloves<br />
Personal protection – eye: Chemical resistant goggles.<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: Safety showers must be available.<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: Clear thick liquid<br />
Odour: Ammonia type odour<br />
pH: 11.2<br />
Boiling point: >100C<br />
Melting point: Not known<br />
Flash point: 104C<br />
Flammability: No<br />
Autoflammability: No<br />
Explosive properties: No<br />
Oxidizing properties: No<br />
Vapour pressure: 17.70 mmHg at 21C<br />
Density: 1.3<br />
Solubility – water: Yes<br />
Solubility – solvent: No<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: No<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Humid, hot conditions<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing agents.<br />
Hazardous decomposition products: Carbon monoxide, ammonia, nitrogen oxide.<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Oral LD50 - rat: 500-2000mg/kg; Dermal LD50 - rabbit: >2000 mg/kg<br />
Skin and eye contact: Irritating to skin and eye (rabbit)<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDGUARD ACTIVATOR<br />
41 Circuit Road,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733<br />
EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Aquatic toxicity – fish: Not known<br />
Aquatic toxicity – daphnia: Not known<br />
Aquatic toxicity – algae: Not known<br />
Biodegradability: Not known<br />
Mobility: No<br />
German wgk: Not Available<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 1760<br />
Substance identity no.: Amines n.o.s.<br />
ADR/RID class: Not available<br />
ADR/RID item no.: Not available<br />
ADR/RID hazard identity no.: Not available<br />
IMDG – shipping name: Amines n.o.s.<br />
IMDG – class: 8<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not available<br />
IMDG – EMS no.: Not available<br />
IMDG – MFAG table no.: Not available<br />
IATA – shipping name: Not available<br />
IATA – class: Not available<br />
IATA – subsidiary risk(s): Not available<br />
ADNR – class: Not available<br />
UK – description: Not available<br />
UK – description: Not available<br />
UK – emergency action class: Not available<br />
UK – classification: Not available<br />
Tremcard no.: Not available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R36/37/38; R22<br />
Safety phrases: S7, S24/25<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDGUARD ACTIVATOR<br />
41 Circuit Road,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733<br />
EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDGUARD LV WEARKOTE<br />
5 Progress Road,<br />
New Germany, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDGUARD LV WEARKOTE EPOXY Chemical abstract no.: Not Available<br />
Chemical family: Mixture<br />
NIOSH no.: Not Available<br />
Chemical name: Mixture<br />
Hazchem code: Not Available<br />
Synonyms: Epoxy Resin UN no.: 3082<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Epichlorohydrin & Bisphenol A<br />
SILICON CARBIDE FILLERS<br />
3. HAZARDS IDENTIFICATION<br />
025085-99-8 60 -70<br />
30 – 35<br />
R38, R43, R52 Xi<br />
Main hazard: Skin and eye irritant<br />
Flammability: None<br />
Chemical hazard: None<br />
Biological hazard: None<br />
Reproductive hazard: None<br />
Health effects – eyes: Reddening, irritation<br />
Health effects – skin: Skin reddening, significant irritation with possible sensitization<br />
Health effects – ingestion: Stomach ache, nausea and vomiting<br />
Health effects – inhalation: None<br />
Carcinogenicity: Not classified as a carcinogen but there is evidence for carcinogenicity<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
4. FIRST AID MEASURES<br />
Product in eye: Flush eyes with water and seek medical attention<br />
Product on skin: Flush with water and remove clothing. Seek medical advice if irritation develops<br />
Product ingestion: Do not induce vomiting. Get immediate medical attention<br />
Product inhaled: Remove to fresh air. Seek medical advice if breathing becomes difficult<br />
5. FIRE FIGHTING MEASURES<br />
Extinguishing media: Dry Powder or C02<br />
Special hazards: None<br />
Protective clothing: Yes<br />
6. ACCIDENTAL RELEASE MEASURES<br />
Personal precautions: Wear protective clothing as indicated in section 8<br />
Environmental precautions: Do not discharge to natural water systems<br />
Small spills: Collect in a container for disposal and wash areas with clean water<br />
Large spills: Collect in containers for disposal. Rinse affected areas with clean water to effluent.<br />
7. HANDLING AND STORAGE<br />
Suitable material: Keep in original containers<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 1 of 4
MATERIAL SAFETY DATA SHEET<br />
5 Progress Road,<br />
New Germany, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Handling / storage precautions: Keep containers closed and in a dry place<br />
SOLIDGUARD LV WEARKOTE<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: None<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: None<br />
Personal protection – hand: Rubber gloves<br />
Personal protection – eye: Not expected to be necessary<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: None<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: paste<br />
Odour: Resin odour<br />
pH: Not applicable<br />
Boiling point: Not applicable<br />
Melting point: Not applicable<br />
Flash point: 252C<br />
Flammability: None<br />
Autoflammability: None<br />
Explosive properties: None<br />
Oxidizing properties: None<br />
Vapour pressure: None<br />
Density: 1.4<br />
Solubility – water: No<br />
Solubility – solvent: Yes<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: None<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Heat<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing materials<br />
Hazardous decomposition products: Carbon monoxide, phenolics<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Not known<br />
Skin and eye contact: Not known<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Aquatic toxicity – fish: 3.1mg/l (fathead minnow)<br />
Aquatic toxicity – daphnia: 1.3mg/l<br />
Aquatic toxicity – algae: Not known<br />
Biodegradability: Natural materials<br />
Mobility: No<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
5 Progress Road,<br />
New Germany, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
German wgk: Not Available<br />
SOLIDGUARD LV WEARKOTE<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 3082<br />
Substance identity no.: Environmentally Hazardous Liquid n.o.s.<br />
ADR/RID class: Not Available<br />
ADR/RID item no.: Not Available<br />
ADR/RID hazard identity no.: Not Available<br />
IMDG – shipping name: Environmentally Hazardous Liquid n.o.s.<br />
IMDG – class: 9<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not Available<br />
IMDG – EMS no.: Not Available<br />
IMDG – MFAG table no.: Not Available<br />
IATA – shipping name: Not Available<br />
Tremcard no.: Not Available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R38, R43, R52<br />
Safety phrases: S2, S24/25, S37<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDGUARD LV WEARKOTE<br />
5 Progress Road,<br />
New Germany, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP100 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead , Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDWEAR HP100 ACT<br />
Chemical abstract no.: Not Available<br />
Chemical family: Blend<br />
NIOSH no.: Not Available<br />
Chemical name: Blend<br />
Hazchem code: Not Available<br />
Synonyms: AMINE CURING AGENT UN no.: 1760<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Benzyl Alcohol 100-51-6
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP100 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead , Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Handling / storage precautions: Keep containers closed and in a dry place away from acids.<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: Keep below OEL with explosion proof ventilation.<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: Wear respirator if ventilation inadequate<br />
Personal protection – hand: Nitrile gloves<br />
Personal protection – eye: Chemical resistant goggles.<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: Safety showers must be available.<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: Brown Liquid<br />
Odour: Ammonia type odour<br />
pH: 11.2<br />
Boiling point: >NA<br />
Melting point: Not known<br />
Flash point: >270<br />
Flammability: No<br />
Autoflammability: No<br />
Explosive properties: No<br />
Oxidizing properties: No<br />
Vapour pressure: 17.70 mmHg at 21C<br />
Density: 1.1<br />
Solubility – water: NO<br />
Solubility – solvent:Yes<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: No<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Humid, hot conditions<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing agents.<br />
Hazardous decomposition products: Carbon monoxide, ammonia, nitrogen oxide.<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Oral LD50 - rat: 500-2000mg/kg; Dermal LD50 - rabbit: >2000 mg/kg<br />
Skin and eye contact: Irritating to skin and eye (rabbit)<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Aquatic toxicity – fish: Not known<br />
Aquatic toxicity – daphnia: Not known<br />
Aquatic toxicity – algae: Not known<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP100 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead , Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Biodegradability: Not known<br />
Mobility: No<br />
German wgk: Not Available<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 1760<br />
Substance identity no.: Amines n.o.s.<br />
ADR/RID class: Not available<br />
ADR/RID item no.: Not available<br />
ADR/RID hazard identity no.: Not available<br />
IMDG – shipping name: Amines n.o.s.<br />
IMDG – class: 8<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not available<br />
IMDG – EMS no.: Not available<br />
IMDG – MFAG table no.: Not available<br />
IATA – shipping name: Not available<br />
IATA – class: Not available<br />
IATA – subsidiary risk(s): Not available<br />
ADNR – class: Not available<br />
UK – description: Not available<br />
UK – description: Not available<br />
UK – emergency action class: Not available<br />
UK – classification: Not available<br />
Tremcard no.: Not available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R36/37/38; R22<br />
Safety phrases: S7, S24/25<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP100 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead , Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP100 EPOXY<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDWEAR HP100<br />
Chemical abstract no.: Not Available<br />
Chemical family: Mixture<br />
NIOSH no.: Not Available<br />
Chemical name: Mixture<br />
Hazchem code: Not Available<br />
Synonyms: Epoxy Resin UN no.: 3082<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Epichlorohydrin & Bisphenol A<br />
ALUMINIUM OXIDE FILLERS<br />
3. HAZARDS IDENTIFICATION<br />
025085-99-8 25 - 30<br />
60 -65<br />
R38, R43, R52 Xi<br />
Main hazard: Skin and eye irritant<br />
Flammability: None<br />
Chemical hazard: None<br />
Biological hazard: None<br />
Reproductive hazard: None<br />
Health effects – eyes: Reddening, irritation<br />
Health effects – skin: Skin reddening, significant irritation with possible sensitization<br />
Health effects – ingestion: Stomach ache, nausea and vomiting<br />
Health effects – inhalation: None<br />
Carcinogenicity: Not classified as a carcinogen but there is evidence for carcinogenicity<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
4. FIRST AID MEASURES<br />
Product in eye: Flush eyes with water and seek medical attention<br />
Product on skin: Flush with water and remove clothing. Seek medical advice if irritation develops<br />
Product ingestion: Do not induce vomiting. Get immediate medical attention<br />
Product inhaled: Remove to fresh air. Seek medical advice if breathing becomes difficult<br />
5. FIRE FIGHTING MEASURES<br />
Extinguishing media: Dry Powder or C02<br />
Special hazards: None<br />
Protective clothing: Yes<br />
6. ACCIDENTAL RELEASE MEASURES<br />
Personal precautions: Wear protective clothing as indicated in section 8<br />
Environmental precautions: Do not discharge to natural water systems<br />
Small spills: Collect in a container for disposal and wash areas with clean water<br />
Large spills: Collect in containers for disposal. Rinse affected areas with clean water to effluent.<br />
7. HANDLING AND STORAGE<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 1 of 4
MATERIAL SAFETY DATA SHEET<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Suitable material: Keep in original containers<br />
Handling / storage precautions: Keep containers closed and in a dry place<br />
SOLIDWEAR HP100 EPOXY<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: None<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: None<br />
Personal protection – hand: Rubber gloves<br />
Personal protection – eye: Not expected to be necessary<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: None<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: Black paste<br />
Odour: Resin odour<br />
pH: Not applicable<br />
Boiling point: Not applicable<br />
Melting point: Not applicable<br />
Flash point: 252C<br />
Flammability: None<br />
Autoflammability: None<br />
Explosive properties: None<br />
Oxidizing properties: None<br />
Vapour pressure: None<br />
Density: 2.7<br />
Solubility – water: No<br />
Solubility – solvent: Yes<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: None<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Heat<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing materials<br />
Hazardous decomposition products: Carbon monoxide, phenolics<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Not known<br />
Skin and eye contact: Not known<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Aquatic toxicity – fish: 3.1mg/l (fathead minnow)<br />
Aquatic toxicity – daphnia: 1.3mg/l<br />
Aquatic toxicity – algae: Not known<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Biodegradability: Natural materials<br />
Mobility: No<br />
German wgk: Not Available<br />
SOLIDWEAR HP100 EPOXY<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 3082<br />
Substance identity no.: Environmentally Hazardous Liquid n.o.s.<br />
ADR/RID class: Not Available<br />
ADR/RID item no.: Not Available<br />
ADR/RID hazard identity no.: Not Available<br />
IMDG – shipping name: Environmentally Hazardous Liquid n.o.s.<br />
IMDG – class: 9<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not Available<br />
IMDG – EMS no.: Not Available<br />
IMDG – MFAG table no.: Not Available<br />
IATA – shipping name: Not Available<br />
Tremcard no.: Not Available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R38, R43, R52<br />
Safety phrases: S2, S24/25, S37<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP100 EPOXY<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP800 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDWEAR HP800 ACT<br />
Chemical abstract no.: Not Available<br />
Chemical family: Blend<br />
NIOSH no.: Not Available<br />
Chemical name: Blend<br />
Hazchem code: Not Available<br />
Synonyms: AMINE CURING AGENT UN no.: 1760<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Benzyl Alcohol 100-51-6
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP800 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Handling / storage precautions: Keep containers closed and in a dry place away from acids.<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: Keep below OEL with explosion proof ventilation.<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: Wear respirator if ventilation inadequate<br />
Personal protection – hand: Nitrile gloves<br />
Personal protection – eye: Chemical resistant goggles.<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: Safety showers must be available.<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: RED PASTE<br />
Odour: Ammonia type odour<br />
pH: 11.2<br />
Boiling point: >NA<br />
Melting point: Not known<br />
Flash point: >270<br />
Flammability: No<br />
Autoflammability: No<br />
Explosive properties: No<br />
Oxidizing properties: No<br />
Vapour pressure: 17.70 mmHg at 21C<br />
Density: 2.2<br />
Solubility – water: NO<br />
Solubility – solvent:Yes<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: No<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Humid, hot conditions<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing agents.<br />
Hazardous decomposition products: Carbon monoxide, ammonia, nitrogen oxide.<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Oral LD50 - rat: 500-2000mg/kg; Dermal LD50 - rabbit: >2000 mg/kg<br />
Skin and eye contact: Irritating to skin and eye (rabbit)<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Aquatic toxicity – fish: Not known<br />
Aquatic toxicity – daphnia: Not known<br />
Aquatic toxicity – algae: Not known<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP800 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Biodegradability: Not known<br />
Mobility: No<br />
German wgk: Not Available<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 1760<br />
Substance identity no.: Amines n.o.s.<br />
ADR/RID class: Not available<br />
ADR/RID item no.: Not available<br />
ADR/RID hazard identity no.: Not available<br />
IMDG – shipping name: Amines n.o.s.<br />
IMDG – class: 8<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not available<br />
IMDG – EMS no.: Not available<br />
IMDG – MFAG table no.: Not available<br />
IATA – shipping name: Not available<br />
IATA – class: Not available<br />
IATA – subsidiary risk(s): Not available<br />
ADNR – class: Not available<br />
UK – description: Not available<br />
UK – description: Not available<br />
UK – emergency action class: Not available<br />
UK – classification: Not available<br />
Tremcard no.: Not available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R36/37/38; R22<br />
Safety phrases: S7, S24/25<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP800 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP800 EPOXY<br />
41 Circuit Rd ,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDWEAR HP800<br />
Chemical abstract no.: Not Available<br />
Chemical family: Mixture<br />
NIOSH no.: Not Available<br />
Chemical name: Mixture<br />
Hazchem code: Not Available<br />
Synonyms: Epoxy Resin UN no.: 3082<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Epichlorohydrin & Bisphenol A<br />
ALUMINIUM OXIDE FILLERS<br />
3. HAZARDS IDENTIFICATION<br />
025085-99-8 25 - 30<br />
60 -65<br />
R38, R43, R52 Xi<br />
Main hazard: Skin and eye irritant<br />
Flammability: None<br />
Chemical hazard: None<br />
Biological hazard: None<br />
Reproductive hazard: None<br />
Health effects – eyes: Reddening, irritation<br />
Health effects – skin: Skin reddening, significant irritation with possible sensitization<br />
Health effects – ingestion: Stomach ache, nausea and vomiting<br />
Health effects – inhalation: None<br />
Carcinogenicity: Not classified as a carcinogen but there is evidence for carcinogenicity<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
4. FIRST AID MEASURES<br />
Product in eye: Flush eyes with water and seek medical attention<br />
Product on skin: Flush with water and remove clothing. Seek medical advice if irritation develops<br />
Product ingestion: Do not induce vomiting. Get immediate medical attention<br />
Product inhaled: Remove to fresh air. Seek medical advice if breathing becomes difficult<br />
5. FIRE FIGHTING MEASURES<br />
Extinguishing media: Dry Powder or C02<br />
Special hazards: None<br />
Protective clothing: Yes<br />
6. ACCIDENTAL RELEASE MEASURES<br />
Personal precautions: Wear protective clothing as indicated in section 8<br />
Environmental precautions: Do not discharge to natural water systems<br />
Small spills: Collect in a container for disposal and wash areas with clean water<br />
Large spills: Collect in containers for disposal. Rinse affected areas with clean water to effluent.<br />
7. HANDLING AND STORAGE<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 1 of 4
MATERIAL SAFETY DATA SHEET<br />
41 Circuit Rd ,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Suitable material: Keep in original containers<br />
Handling / storage precautions: Keep containers closed and in a dry place<br />
SOLIDWEAR HP800 EPOXY<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: None<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: None<br />
Personal protection – hand: Rubber gloves<br />
Personal protection – eye: Not expected to be necessary<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: None<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: Black paste<br />
Odour: Resin odour<br />
pH: Not applicable<br />
Boiling point: Not applicable<br />
Melting point: Not applicable<br />
Flash point: 252C<br />
Flammability: None<br />
Autoflammability: None<br />
Explosive properties: None<br />
Oxidizing properties: None<br />
Vapour pressure: None<br />
Density: 2.7<br />
Solubility – water: No<br />
Solubility – solvent: Yes<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: None<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Heat<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing materials<br />
Hazardous decomposition products: Carbon monoxide, phenolics<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Not known<br />
Skin and eye contact: Not known<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Aquatic toxicity – fish: 3.1mg/l (fathead minnow)<br />
Aquatic toxicity – daphnia: 1.3mg/l<br />
Aquatic toxicity – algae: Not known<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
41 Circuit Rd ,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Biodegradability: Natural materials<br />
Mobility: No<br />
German wgk: Not Available<br />
SOLIDWEAR HP800 EPOXY<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 3082<br />
Substance identity no.: Environmentally Hazardous Liquid n.o.s.<br />
ADR/RID class: Not Available<br />
ADR/RID item no.: Not Available<br />
ADR/RID hazard identity no.: Not Available<br />
IMDG – shipping name: Environmentally Hazardous Liquid n.o.s.<br />
IMDG – class: 9<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not Available<br />
IMDG – EMS no.: Not Available<br />
IMDG – MFAG table no.: Not Available<br />
IATA – shipping name: Not Available<br />
Tremcard no.: Not Available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R38, R43, R52<br />
Safety phrases: S2, S24/25, S37<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP800 EPOXY<br />
41 Circuit Rd ,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP500 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDWEAR HP500 ACT<br />
Chemical abstract no.: Not Available<br />
Chemical family: Blend<br />
NIOSH no.: Not Available<br />
Chemical name: Blend<br />
Hazchem code: Not Available<br />
Synonyms: AMINE CURING AGENT UN no.: 1760<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Benzyl Alcohol 100-51-6
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP500 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Handling / storage precautions: Keep containers closed and in a dry place away from acids.<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: Keep below OEL with explosion proof ventilation.<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: Wear respirator if ventilation inadequate<br />
Personal protection – hand: Nitrile gloves<br />
Personal protection – eye: Chemical resistant goggles.<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: Safety showers must be available.<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: RED PASTE<br />
Odour: Ammonia type odour<br />
pH: 11.2<br />
Boiling point: >NA<br />
Melting point: Not known<br />
Flash point: >270<br />
Flammability: No<br />
Autoflammability: No<br />
Explosive properties: No<br />
Oxidizing properties: No<br />
Vapour pressure: 17.70 mmHg at 21C<br />
Density: 2.2<br />
Solubility – water: NO<br />
Solubility – solvent:Yes<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: No<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Humid, hot conditions<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing agents.<br />
Hazardous decomposition products: Carbon monoxide, ammonia, nitrogen oxide.<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Oral LD50 - rat: 500-2000mg/kg; Dermal LD50 - rabbit: >2000 mg/kg<br />
Skin and eye contact: Irritating to skin and eye (rabbit)<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Aquatic toxicity – fish: Not known<br />
Aquatic toxicity – daphnia: Not known<br />
Aquatic toxicity – algae: Not known<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP500 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Biodegradability: Not known<br />
Mobility: No<br />
German wgk: Not Available<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 1760<br />
Substance identity no.: Amines n.o.s.<br />
ADR/RID class: Not available<br />
ADR/RID item no.: Not available<br />
ADR/RID hazard identity no.: Not available<br />
IMDG – shipping name: Amines n.o.s.<br />
IMDG – class: 8<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not available<br />
IMDG – EMS no.: Not available<br />
IMDG – MFAG table no.: Not available<br />
IATA – shipping name: Not available<br />
IATA – class: Not available<br />
IATA – subsidiary risk(s): Not available<br />
ADNR – class: Not available<br />
UK – description: Not available<br />
UK – description: Not available<br />
UK – emergency action class: Not available<br />
UK – classification: Not available<br />
Tremcard no.: Not available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R36/37/38; R22<br />
Safety phrases: S7, S24/25<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP500 ACTIVATOR<br />
ACTIVATOR<br />
41 Circuit Rd<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP500 EPOXY<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
1. PRODUCT INFOROMATION<br />
Trade name: SOLIDWEAR HP500<br />
Chemical abstract no.: Not Available<br />
Chemical family: Mixture<br />
NIOSH no.: Not Available<br />
Chemical name: Mixture<br />
Hazchem code: Not Available<br />
Synonyms: Epoxy Resin UN no.: 3082<br />
2. COMPOSITION<br />
Hazardous components:<br />
Ingredient CAS no. Percent R Phrase EEC<br />
Epichlorohydrin & Bisphenol A<br />
ALUMINIUM OXIDE FILLERS<br />
3. HAZARDS IDENTIFICATION<br />
025085-99-8 25 - 30<br />
60 -65<br />
R38, R43, R52 Xi<br />
Main hazard: Skin and eye irritant<br />
Flammability: None<br />
Chemical hazard: None<br />
Biological hazard: None<br />
Reproductive hazard: None<br />
Health effects – eyes: Reddening, irritation<br />
Health effects – skin: Skin reddening, significant irritation with possible sensitization<br />
Health effects – ingestion: Stomach ache, nausea and vomiting<br />
Health effects – inhalation: None<br />
Carcinogenicity: Not classified as a carcinogen but there is evidence for carcinogenicity<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
4. FIRST AID MEASURES<br />
Product in eye: Flush eyes with water and seek medical attention<br />
Product on skin: Flush with water and remove clothing. Seek medical advice if irritation develops<br />
Product ingestion: Do not induce vomiting. Get immediate medical attention<br />
Product inhaled: Remove to fresh air. Seek medical advice if breathing becomes difficult<br />
5. FIRE FIGHTING MEASURES<br />
Extinguishing media: Dry Powder or C02<br />
Special hazards: None<br />
Protective clothing: Yes<br />
6. ACCIDENTAL RELEASE MEASURES<br />
Personal precautions: Wear protective clothing as indicated in section 8<br />
Environmental precautions: Do not discharge to natural water systems<br />
Small spills: Collect in a container for disposal and wash areas with clean water<br />
Large spills: Collect in containers for disposal. Rinse affected areas with clean water to effluent.<br />
7. HANDLING AND STORAGE<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 1 of 4
MATERIAL SAFETY DATA SHEET<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Suitable material: Keep in original containers<br />
Handling / storage precautions: Keep containers closed and in a dry place<br />
SOLIDWEAR HP500 EPOXY<br />
8. EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
Occupational exposure limits: None<br />
Engineering control measures: Local exhaust systems, natural air flow<br />
Personal protection – respiratory: None<br />
Personal protection – hand: Rubber gloves<br />
Personal protection – eye: Not expected to be necessary<br />
Personal protection – skin: Apron, closed shoes, overalls<br />
Other protection: None<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: Black paste<br />
Odour: Resin odour<br />
pH: Not applicable<br />
Boiling point: Not applicable<br />
Melting point: Not applicable<br />
Flash point: 252C<br />
Flammability: None<br />
Autoflammability: None<br />
Explosive properties: None<br />
Oxidizing properties: None<br />
Vapour pressure: None<br />
Density: 2.7<br />
Solubility – water: No<br />
Solubility – solvent: Yes<br />
Solubility – coefficient: Not known<br />
Neurotoxicity: None<br />
10. STABILITY AND REACTIVITY<br />
Conditions to avoid: Heat<br />
Incompatible materials: Strong organic acids and alkalis, oxidizing materials<br />
Hazardous decomposition products: Carbon monoxide, phenolics<br />
11. TOXICOLOGICAL INFORMATION<br />
Acute toxicity: Not known<br />
Skin and eye contact: Not known<br />
Chronic toxicity: Not known<br />
Carcinogenicity: None<br />
Mutagenicity: None<br />
Neurotoxicity: None<br />
Reproductive hazardous: None<br />
12. ECOLOGICAL INFORMATION<br />
Aquatic toxicity – fish: 3.1mg/l (fathead minnow)<br />
Aquatic toxicity – daphnia: 1.3mg/l<br />
Aquatic toxicity – algae: Not known<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 2 of 4
MATERIAL SAFETY DATA SHEET<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
Biodegradability: Natural materials<br />
Mobility: No<br />
German wgk: Not Available<br />
SOLIDWEAR HP500 EPOXY<br />
13. DISPOSAL CONSIDERATIONS<br />
Disposal methods: Dispose of as chemical waste at approved landfill sites<br />
Disposal of packaging: Rinse and recycle or dispose of at approved landfill sites<br />
14. TRANSPORT INFORMATION<br />
UN no.: 3082<br />
Substance identity no.: Environmentally Hazardous Liquid n.o.s.<br />
ADR/RID class: Not Available<br />
ADR/RID item no.: Not Available<br />
ADR/RID hazard identity no.: Not Available<br />
IMDG – shipping name: Environmentally Hazardous Liquid n.o.s.<br />
IMDG – class: 9<br />
IMDG – packaging group: III<br />
IMDG – marine pollutant: Not Available<br />
IMDG – EMS no.: Not Available<br />
IMDG – MFAG table no.: Not Available<br />
IATA – shipping name: Not Available<br />
Tremcard no.: Not Available<br />
15. REGULATORY INFORMATION<br />
EEC hazard classification: Xi<br />
Risk phrases: R38, R43, R52<br />
Safety phrases: S2, S24/25, S37<br />
National legislation: None<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 3 of 4
MATERIAL SAFETY DATA SHEET<br />
SOLIDWEAR HP500 EPOXY<br />
41 Circuit Rd,<br />
Westmead, Kwa-Zulu Natal,<br />
South Africa<br />
Tel: +27 (0) 31 7057733 EMERGENCY: 0832891307 18 August 2016; Rev 1<br />
16. OTHER INFORMAION<br />
Technical Finishes (PTY) Ltd provides the information contained herein in good faith but makes no representation<br />
as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate<br />
precautionary handling of the material by a properly trained person using this product. Individuals receiving the<br />
information must exercise their independent judgment in determining its appropriateness for a particular purpose.<br />
TECHNICAL FINISHES (PTY) LTD MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER<br />
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF<br />
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE<br />
INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.<br />
ACCORDINGLY, TECHNICAL FINISHES (PTY) LTD WILL NOT BE RESPONSIBLE FOR DAMAGES<br />
RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.<br />
Please refer to the disclaimer in section 16 at the end of this material safety data sheet.<br />
TFIMS-03-02-03-F01 Printed Copies Uncontrolled Page 4 of 4