Ritter Implants Catalog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2016 PRODUCT CATALOG<br />
MADE IN<br />
GERMANY
<strong>Ritter</strong> <strong>Implants</strong> are produced in a factory in south Germany<br />
near Tuttlingen in the outer boundaries of the Black Forest.<br />
The <strong>Ritter</strong> brand stands for high quality state-of-the-art<br />
technology and innovative products made in Germany.
TABLE OF CONTENTS<br />
IMPLANTS<br />
Quadro Spiral <strong>Implants</strong> (QSI) 4-5<br />
SB/LA Spiral <strong>Implants</strong> 6-7<br />
PROSTHETICS<br />
Impression Copings 8<br />
Impression Hardware 9<br />
Healing Abutments & Abutments for Casting 10<br />
Peek Abutments for Provisionals 11<br />
Restoration Abutments 12<br />
Zirconium Abutments 13<br />
Ball Attachments 14<br />
Locate-It 15<br />
All On 4 / All On 6 Multi Unit 16<br />
Straight Multi Unit 17<br />
NARROW LINE 18-19<br />
SURGICAL KITS<br />
Professional Kit 20<br />
Narrow Line Kit 21<br />
Prosthetic Kit 22<br />
Professional Euro Kit 23<br />
Starter Kit 24<br />
Surgical Kits Tool List 25-27
Quadro Spiral <strong>Implants</strong> (QSI)<br />
The QSI implant* is suited for surgical protocols involving soft bone types. The<br />
implant is self-drilling, self-tapping and condenses adjacent bone due to its<br />
unique shape and progressively adapting double thread design.<br />
• Designed for soft bone, immediate implantation and immediate loading<br />
• Allows for excellent primary stability<br />
• Can be inserted into smaller size preparations<br />
• Allows for directional adjustments during placement<br />
• Can be used in any region - anterior or posterior, upper or lower jaw<br />
• Ideal for total or partial edentulous cases, or for single tooth loss<br />
• Can be used in closed and open sinus lift procedures<br />
• Allows for single or dual surgical placement protocols<br />
• Ideal for bone regeneration and/or splitting crest technique<br />
Clinical Benefits:<br />
• Less bone loss, less trauma<br />
• Aggressive thread design allows for adjustments to the insertion<br />
line during placement — this optimizes surgical positioning<br />
• Decreased risk of perforating the lingual or buccal cortex, or<br />
damaging nearby teeth<br />
• Extremely accurate internal hex<br />
Bone Type II<br />
Hard Bone<br />
Bone Type III<br />
Soft Bone<br />
Bone Type IV<br />
Very Soft Bone<br />
• Simple restorative procedure<br />
• Efficient and cost effective<br />
1 - Abutment<br />
2 - Soft Tissue<br />
3 - Bone<br />
• Greater surface area<br />
Coronal<br />
Micro Rings<br />
• Surface area completely roughened<br />
• Threaded to the top of the implant<br />
• Designed for cortical bone to soft<br />
tissue margins<br />
• Better load distribution – less<br />
vertex stress<br />
Body & Core<br />
• Tapered body and core, more<br />
prominent than the threads<br />
• Bone’s condensing body<br />
• Easy insertion<br />
• Double thread<br />
• Threads are sharp and deep<br />
• Easy insertion<br />
• Condensing body<br />
• High primary stability<br />
• Apical blade<br />
Threads with<br />
Wide Steps<br />
• The coronal threads condense the<br />
bone of the apical threads<br />
Apical<br />
• Slim core, easy insertion<br />
• Will penetrate small diameter<br />
preparations<br />
• Less danger or damage to<br />
anatomical structures<br />
4
Quadro Spiral <strong>Implants</strong> (QSI)<br />
Standard Line<br />
QSI-3.75 QSI-4.2 QSI-5 QSI-6<br />
Diameter (mm)<br />
3.75<br />
4.2<br />
5<br />
6<br />
Length (mm)<br />
8, 10, 11.5, 13, 16<br />
8, 10, 11.5, 13, 16<br />
6, 8, 10, 11.5, 13, 16<br />
6, 8, 10, 11.5, 13<br />
Platform<br />
Diameter (mm)<br />
3.75<br />
3.75<br />
3.75<br />
3.75<br />
Surface<br />
SBA<br />
SBA<br />
SBA<br />
SBA<br />
Hex Size (mm)<br />
2.43<br />
2.43<br />
2.43<br />
2.43<br />
Connection<br />
Internal Hex<br />
Internal Hex<br />
Internal Hex<br />
Internal Hex<br />
Narrow Line<br />
NL-QSI-3<br />
NL-QSI-3.3<br />
All <strong>Ritter</strong> <strong>Implants</strong> include an implant<br />
carrier and implant cover screw and<br />
include a User Manual.<br />
Diameter (mm)<br />
3<br />
3.3<br />
Length (mm)<br />
10, 11.5, 13, 16<br />
10, 11.5, 13, 16<br />
CAUTION: ALL Narrow Line <strong>Implants</strong><br />
need a different Hex driver because<br />
Platform<br />
Diameter (mm)<br />
3<br />
3<br />
of the smaller size of inner Hex.<br />
NL-RDI-g/ 15.<br />
Surface<br />
SBA<br />
SBA<br />
Hex Size (mm)<br />
2<br />
2<br />
Connection<br />
Internal Hex<br />
Internal Hex<br />
5
SB/LA Spiral <strong>Implants</strong><br />
The New <strong>Ritter</strong> Spiral Implant<br />
SandBlasted | Large Grit | Acid Etched | Platform Switch Capable | Tapered<br />
The New <strong>Ritter</strong> SB/LA Spiral <strong>Implants</strong> are made from titanium alloy grade<br />
5 (Ti6AL4VELI: 90% titanium, 6% aluminium, 4% vanadium) which is treated<br />
with a large grit acid etching and sand blasting process.<br />
This method creates high surface area differences<br />
which—immediately after the implant’s placing—allow more intense<br />
absorption of plasma proteins and blood into the implant micropores,<br />
faster osseointegration and higher primary stability.<br />
Implant Surface:<br />
• Double thermal acid etching process to create a micro<br />
surface of approximately 2 microns<br />
• Ability to build a titanium oxide layer<br />
• Macro surface of 20-40 microns<br />
Advantages:<br />
• Increased early bone to implant contact<br />
• Increased stability<br />
• Shortened healing period<br />
• Higher predictability<br />
• High acceptance of docking of osteoblasts<br />
The New SB/LA Spiral Implant is<br />
protected by sealed packaging with<br />
two sterile tubes. The implant is fixed<br />
on a titanium shaft and can be easily<br />
removed using the motor mount to<br />
bend it to the side, or by using the<br />
mounting hand tool. The implant<br />
comes including the cover screw.<br />
Cover screw<br />
6
SB/LA Spiral <strong>Implants</strong><br />
Standard Line<br />
Spiral Implant<br />
3.75<br />
Spiral Implant<br />
4.2<br />
Spiral Implant<br />
5<br />
Spiral Implant<br />
6<br />
Diameter (mm)<br />
3.75<br />
4.2<br />
5<br />
6<br />
Length (mm)<br />
8, 10, 11.5, 13, 16<br />
8, 10, 11.5, 13, 16<br />
6, 8, 10, 11.5, 13, 16<br />
6, 8, 10, 11.5, 13<br />
Platform<br />
Diameter (mm)<br />
3.75<br />
3.75<br />
3.75<br />
3.75<br />
Surface<br />
SB/LA<br />
SB/LA<br />
SB/LA<br />
SB/LA<br />
Hex Size (mm)<br />
2.43<br />
2.43<br />
2.43<br />
2.43<br />
Connection<br />
Internal Hex<br />
Internal Hex<br />
Internal Hex<br />
Internal Hex<br />
Narrow Line<br />
Spiral Implant<br />
3.0<br />
Spiral Implant<br />
3.3<br />
Diameter (mm)<br />
3.0<br />
3.3<br />
Length (mm)<br />
10, 11.5, 13, 16<br />
10, 11.5, 13, 16<br />
Platform<br />
Diameter (mm)<br />
2.3<br />
2.3<br />
Surface<br />
SB/LA<br />
SB/LA<br />
Hex Size (mm)<br />
2.0<br />
2.0<br />
Connection<br />
Internal Hex<br />
Internal Hex<br />
7
Prosthetics<br />
Impression Copings<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
CTT-10<br />
Closed Tray Transfer<br />
10mm<br />
Includes TST-14<br />
OTT<br />
Open Tray Transfer<br />
Includes TST-22<br />
CTT-13<br />
Closed Tray Transfer<br />
13mm<br />
Includes TST-17<br />
OTT-10<br />
Open Tray Transfer<br />
10mm<br />
Includes TST-22<br />
CTT-13N<br />
Closed Tray Transfer<br />
13mm (Narrow)<br />
Includes TST-17<br />
TST-14<br />
Titanium Screw for Tray<br />
Transfer - 14mm<br />
OTT-13<br />
Open Tray Transfer<br />
13mm<br />
Includes TST-22<br />
TST-17<br />
Titanium Screw for Tray<br />
Transfer - 17mm<br />
TST-22<br />
Titanium Screw for Tray<br />
Transfer - 22mm<br />
OTT-13N<br />
Open Tray Transfer<br />
13mm (Narrow)<br />
Includes TST-22<br />
CTTA<br />
Closed Transfer<br />
for OCA<br />
OTTA<br />
Open Transfer for OCA<br />
Includes OTTA screw<br />
3DSPA-8<br />
Plastic Abutment<br />
for 3D Scanner<br />
8
Prosthetics<br />
Impression Hardware<br />
Platform: 4.8mm, All PUT Abutments Include PUP-CA<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
PUT-1S*<br />
PUT-2S*<br />
Pop Up Transfer Abutment<br />
1mm Shoulder, 4mm Cone<br />
Pop Up Transfer Abutment<br />
2mm Shoulder, 4mm Cone<br />
IA-3.75<br />
Implant Analog<br />
3.75mm<br />
PUT-3S*<br />
Pop Up Transfer Abutment<br />
3mm Shoulder, 4mm Cone<br />
PUT-5S*<br />
PUT-1M*<br />
Pop Up Transfer Abutment<br />
5mm Shoulder, 4mm Cone<br />
Pop Up Transfer Abutment<br />
1mm Shoulder, 6mm Cone<br />
IA-5<br />
Implant Analog<br />
5mm<br />
PUT-2M*<br />
Pop Up Transfer Abutment<br />
2mm Shoulder, 6mm Cone<br />
PUT-1L*<br />
PUT-2L*<br />
Pop Up Transfer Abutment<br />
1mm Shoulder, 8mm Cone<br />
Pop Up Transfer Abutment<br />
2mm Shoulder, 8mm Cone<br />
IA-6<br />
Implant Analog<br />
6mm<br />
PUT-3L*<br />
Pop Up Transfer Abutment<br />
3mm Shoulder, 8mm Cone<br />
PUT- 4L*<br />
PUP-CA<br />
Pop Up Transfer Abutment<br />
4mm Shoulder, 8mm Cone<br />
Impression Plastic Cap for<br />
PUT-S, M & L<br />
TACA<br />
Analog for Connection<br />
Abutment for OCA & ACA<br />
WS-PUT<br />
Waxing Sleeve for PUT-S,<br />
M & L without Rotation (red)<br />
TTAO<br />
Titanium Temporary<br />
Abutment for OCA<br />
WS-PUT-R<br />
Waxing Sleeve for PUT-S,<br />
M & L with Rotation (white)<br />
TC-PUT-S<br />
TC-PUT-M<br />
TC-PUT-L<br />
Temporary Cap (4mm)<br />
for PUT-S<br />
Temporary Cap (6mm)<br />
for PUT-M<br />
Temporary Cap (8mm)<br />
for PUT-L<br />
IA-PUT-S<br />
IA-PUT-M<br />
IA-PUT-L<br />
Analog for PUT Abutment<br />
Platform: 4.8mm, Cone: 4mm<br />
Analog for PUT Abutment<br />
Platform: 4.8mm, Cone: 6mm<br />
Analog for PUT Abutment<br />
Platform: 4.8mm, Cone: 8mm<br />
*Includes TSA-8.3 - Titanium Screw<br />
9
Prosthetics<br />
Healing Abutments<br />
Custom Abutments Available<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
HC-2<br />
Healing Abutment<br />
2mm<br />
HC-6<br />
Healing Abutment<br />
6mm<br />
HC-3<br />
Healing Abutment<br />
3mm<br />
HC-7<br />
Healing Abutment<br />
7mm<br />
HC-3N<br />
Healing Abutment<br />
3mm (Narrow)<br />
HC-3W<br />
Healing Abutment<br />
3mm (Wide)<br />
HC-O<br />
Healing Abutment for<br />
Overdenture (for OCA)<br />
HC-3EW<br />
Healing Abutment<br />
3mm (Extra Wide<br />
6.3mm Diameter)<br />
HC-OC<br />
Healing Abutment for<br />
Overdenture (for OCA)<br />
with Cone<br />
HC-4<br />
Healing Abutment<br />
4mm<br />
TSA-8.3<br />
Titanium Screw<br />
8.3mm for<br />
Prosthetics<br />
HC-5<br />
HC-5N<br />
HC-5W<br />
Healing Abutment<br />
5mm<br />
Healing Abutment<br />
5mm (Narrow)<br />
Healing Abutment<br />
5mm (Wide)<br />
Healing abutments maintain the opening of tissue<br />
to establish an excellent emergence profile. The<br />
surface is polished titanium with outstanding<br />
tissue acceptance.<br />
The distance between the horizontal marks is 1 mm<br />
and mark the trans-gingival height.<br />
Internal hex for hex driver 1.29mm<br />
available in wide and narrow versions.<br />
Image<br />
Prosthetics<br />
Abutments for Casting<br />
Item No.<br />
Description<br />
HC-5EW<br />
Healing Abutment -<br />
5mm (Extra Wide<br />
6.3mm Diameter)<br />
AZA<br />
Titanium Abutment<br />
for Casting<br />
Titanium base for accurate<br />
restorations. For custom<br />
cast prosthetics.<br />
10
Prosthetics<br />
Peek Abutments for Provisionals<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
PASA-1*<br />
Peek-On Anatomic<br />
Straight Abutment<br />
1mm Shouder,<br />
Length: 10.5mm<br />
EAPA-25-1*<br />
Peek-On Esthetic<br />
Angled Abutment,<br />
25 Degree, 1mm<br />
Shoulder, Length: 8.5mm<br />
PASA-2*<br />
Peek-On Anatomic<br />
Straight Abutment<br />
2mm Shoulder,<br />
Length: 11.5mm<br />
EAPA-25-2*<br />
Peek-On Esthetic<br />
Angled Abutment,<br />
25 Degree, 2mm<br />
Shoulder, Length: 9.5mm<br />
PASA-3*<br />
Peek-On Anatomic<br />
Straight Abutment<br />
3mm Shoulder,<br />
Length: 12.5mm<br />
EAPA-25-3*<br />
Peek-On Esthetic<br />
Angled Abutment,<br />
25 Degree, 3mm<br />
Shoulder, Length: 10.5mm<br />
XSPA-05*<br />
Peek-On X-Shape<br />
Straight Abutment<br />
0.5mm Shoulder,<br />
Length: 8.4mm<br />
XAPA-15-05*<br />
Peek-On X-Shape<br />
Angled Abutment,<br />
15 Degree, 0.5mm<br />
Shoulder, Length: 8.4mm<br />
XSPA-1*<br />
Peek-On X-Shape<br />
Straight Abutment<br />
1mm Shoulder,<br />
Length: 9.2mm<br />
XAPA-15-1W*<br />
Peek-On X-Shape<br />
Angled Abutment,<br />
15 Degree, 1mm<br />
Shoulder, Length: 9.2mm<br />
EAPA-15-1*<br />
Peek-On Esthetic<br />
Angled Abutment,<br />
15 Degree, 1mm<br />
Shoulder, Length: 9.9mm<br />
XAPA-25-05<br />
Peek-On X-Shape<br />
Angled Abutment,<br />
25 Degree, 0.5mm<br />
Shoulder, Length: 8.4mm<br />
EAPA-15-2*<br />
Peek-On Esthetic<br />
Angled Abutment,<br />
15 Degree, 2mm<br />
Shoulder, Length: 10.9mm<br />
XAPA-25-1W<br />
Peek-On X-Shape<br />
Angled Abutment,<br />
25 Degree, 1mm<br />
Shoulder, Length: 9.2mm<br />
EAPA-15-3*<br />
Peek-On Esthetic<br />
Angled Abutment,<br />
15 Degree, 3mm<br />
Shoulder, Length: 11.9mm<br />
All standard Abutments include<br />
Titanium Screw TSA-8.3.<br />
Needed tools:<br />
Hand Hex Driver for<br />
Abutments<br />
HHDA for Hex 1.29<br />
11
Prosthetics<br />
Restoration Abutments<br />
Custom Abutments Available<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
SSTA-1*<br />
SSTA-2*<br />
SSTA-3*<br />
SSTA-4*<br />
Straight Titanium<br />
Abutment<br />
Shoulder 1, 2, 3, or 4mm<br />
EATA-15-1*<br />
EATA-15-2*<br />
EATA-15-3*<br />
Esthetic Angled<br />
Titanium Abutment,<br />
15 Degree,<br />
1, 2 or 3mm Shoulder<br />
STPS-1*<br />
STPS-2*<br />
STPS-3*<br />
XSZA-05*<br />
XSZA-1*<br />
Esthetic Straight<br />
Abutment With<br />
Platform Shifting<br />
1, 2, or 3mm<br />
Zircorit X-Shape Straight<br />
Zirconium Abutment,<br />
0.5mm Shoulder,<br />
Length: 8.4mm<br />
Zircorit X-Shape Straight<br />
Zirconium Abutment,<br />
1mm Shoulder,<br />
Length: 9.4mm<br />
EATA-25-1*<br />
EATA-25-2*<br />
EATA-25-3*<br />
SAGA-1*<br />
SAGA-2*<br />
SAGA-3*<br />
Esthetic Angled<br />
Titanium Abutment,<br />
25 Degree,<br />
1, 2 or 3mm Shoulder<br />
Straight Anatomic<br />
Golden Titanium<br />
Abutment<br />
1, 2, or 3mm<br />
XAZA-15-05*<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
15 Degree, 0.5mm<br />
Shoulder, Length: 8.4mm<br />
SATA-1*<br />
SATA-2*<br />
SATA-3*<br />
Straight Anatomic<br />
Titanium Abutment<br />
1, 2, or 3mm<br />
XAZA-15-1W*<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
15 Degree, 1mm<br />
Shoulder, Length: 9.2mm<br />
*Includes TSA-8.3 - Titanium Screw<br />
XAZA-25-05*<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
25 Degree, 0.5mm<br />
Shoulder, Length: 8.4mm<br />
XAZA-25-1W*<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
25 Degree, 1mm<br />
Shoulder, Length: 9.2mm<br />
*Includes TSA-8.3 - Titanium Screw<br />
12
Prosthetics<br />
Zirconium Abutments<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
ZSTA-8<br />
ZASA-05<br />
ZASA-1<br />
ZASA-2<br />
ZASA-3<br />
EAZA-15-05<br />
EAZA-15-1<br />
EAZA-15-2<br />
EAZA-15-3<br />
*Includes TSA-8.3 - Titanium Screw<br />
Zircorit Zirconium<br />
Straight Abutment with<br />
Metal Base, 8mm<br />
Zircorit Zirconium<br />
Anatomic Straight<br />
Abutment, 0.5mm Shoulder,<br />
Length: 10mm<br />
Zircorit Zirconium<br />
Anatomic Straight<br />
Abutment, 1mm Shoulder,<br />
Length: 10.5mm<br />
Zircorit Zirconium<br />
Anatomic Straight<br />
Abutment, 2mm Shoulder,<br />
Length: 10.9mm<br />
Zircorit Zirconium<br />
Anatomic Straight<br />
Abutment, 3mm Shoulder,<br />
Length: 12.5mm<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 15<br />
Degree, 0.5mm Shoulder,<br />
Length: 9.4mm<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 15<br />
Degree, 1mm Shoulder,<br />
Length: 9.9mm<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 15<br />
Degree, 2mm Shoulder,<br />
Length: 10.9mm<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 15<br />
Degree, 3mm Shoulder,<br />
Length: 11.9mm<br />
EAZA-25-05<br />
EAZA-25-1<br />
EAZA-25-2<br />
EAZA-25-3<br />
XSZA-05<br />
XSZA-1<br />
XAZA-15-05<br />
XAZA-15-1W<br />
XAZA-25-05<br />
XAZA-25-1W<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 25<br />
Degree, 0.5mm Shoulder,<br />
Length: 8mm<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 25<br />
Degree, 1mm Shoulder,<br />
Length: 8.5m<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 25<br />
Degree, 2mm Shoulder,<br />
Length: 9.5mm<br />
Zircorit Esthetic Angled<br />
Zirconium Abutment, 25<br />
Degree, 3mm Shoulder,<br />
Length: 10.5mm<br />
Zircorit X-Shape Straight<br />
Zirconium Abutment,<br />
0.5mm Shoulder,<br />
Length: 8.4mm<br />
Zircorit X-Shape Straight<br />
Zirconium Abutment,<br />
1mm Shoulder,<br />
Length: 9.4mm<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
15 Degree, 0.5mm<br />
Shoulder, Length: 8.4mm<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
15 Degree, 1mm<br />
Shoulder, Length: 9.2mm<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
25 Degree, 0.5mm<br />
Shoulder, Length: 8.4mm<br />
Zircorit X-Shape Angled<br />
Zirconium Abutment,<br />
25 Degree, 1mm<br />
Shoulder, Length: 9.2mm<br />
*Includes TSA-8.3 - Titanium Screw<br />
13
ACCESSORIES<br />
Ball Attachments<br />
Prosthetics<br />
Ball Attachments<br />
Picture Art. No. Description<br />
Image<br />
1mm 2mm 3mm 4mm<br />
5mm<br />
6mm<br />
7mm<br />
BA-1 BA-2 BA-3 BA-4 BA-5 BA-6 BA-7<br />
Item No.<br />
BA-1<br />
BA-2 BA-3Ball Attachment BA-41mm, Golden BA-5 Tin CoatedBA-6 BA-7<br />
incl. 1xSCB, 1x BA-SP, MCB Metal Cap<br />
BA-1<br />
Description<br />
Ball Attachment 2mm, Golden Tin Coated<br />
Ball Attachment BA-2Golden Tin Coated incl. 1xSCB, Including 1x BA-SP, MCB 1 SCB, Metal 1 BA-SP, Cap 1 - MCB Metal Cap<br />
1, 2, 3, 4, 5, 6, or 7mm<br />
Ball Attachment 3mm, Golden Tin Coated<br />
BA-3<br />
incl. 1xSCB, 1x BA-SP, MCB Metal Cap<br />
Image<br />
BA-4<br />
BA-5<br />
BA-6<br />
Ball Attachment 4mm, Golden Tin Coated<br />
incl. 1xSCB, 1x BA-SP, MCB Metal Cap<br />
Ball Attachment 5mm, Golden Tin Coated<br />
incl. 1xSCB, 1x BA-SP, MCB Metal Cap<br />
Ball Attachment 6mm, Golden Tin Coated<br />
incl. 1xSCB, 1x BA-SP, MCB Metal Cap<br />
Item No.<br />
SCB-T<br />
Ball Attachment 7mm, Golden Tin Coated<br />
BA-7<br />
incl. 1xSCB, 1x BA-SP, MCB Metal Cap<br />
SCB-P SCB-Y SCB-G SCB-B BA-SP MCB<br />
SCB: Silicone Cap for Ball Attachment<br />
SCB-T: Transparent (4 pcs.): Slightly Elastic, Retention 1200-1300g<br />
SCB-P: Pink (4 pcs.): Elastic, Retention 800-950g<br />
SCB-Y: Yellow (4 pcs.): Very Elastic, Retention 500-550g<br />
Description Ball Attachments SCB-G: are used Green for the (4 fixation pcs.): of Extremely Elastic, Retention
LOCATE-IT<br />
mm, the Locate-It is the smallest attachment system on the<br />
market.<br />
Picture Art. No. Description<br />
Prosthetics<br />
Locate-It<br />
Image<br />
0.5mm<br />
1mm<br />
2mm<br />
3mm<br />
4mm<br />
5mm<br />
6mm<br />
7mm<br />
LOC-05<br />
LOC-1<br />
LOC-2<br />
LOC-3<br />
LOC-4<br />
LOC-5<br />
LOC-6<br />
LOC-7<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
LOC-05<br />
LOC-1 LOC-2 LOCATE-IT LOC-3 0.5mm LOC-4 KIT, Golden Tin LOC-5 Coated LOC-6 LOC-7<br />
LOC-05<br />
incl. 4xSCL (one piece each), BA-SP, MC-LOC<br />
LOCATE-IT Kit, Golden Tin Coated Including LOCATE-IT 1mm 4 - SCL KIT, Golden (One Tin Piece Coated Each), 1 - BA-SP, 1 - MC-LOC<br />
LOC-1<br />
incl. 4xSCL (one piece each), BA-SP, MC-LOC<br />
0.5, 1, 2, 3, 4, 5, 6, or 7mm<br />
LOCATE-IT 2mm KIT, Golden Tin Coated<br />
LOC-2<br />
incl. 4xSCL (one piece each), BA-SP, MC-LOC<br />
LOC-3<br />
BA-SP: Separator O-Rings for Locate-It<br />
LOC-CPK<br />
LOCATE-IT Casting Kit<br />
LOC-INS-KIT<br />
LOCATE-IT 3mm KIT, Golden Tin Coated<br />
incl. 4xSCL (one piece each), BA-SP, MC-LOC<br />
LOCATE-IT 4mm KIT, Golden Tin Coated<br />
LOC-4<br />
incl. 4xSCL (one piece each), BA-SP, MC-LOC<br />
SCL-V SCL-T SCL-P SCL-Y SCL-B BA-SP MC-LOC LOC-CPC<br />
LOCATE-IT 5mm KIT, Golden Tin Coated<br />
LOC-5<br />
incl. 4xSCL (one piece each), BA-SP, MC-LOC<br />
SCL: Silicone Cap for Locate-It<br />
MC-LOC: Metal Cap for Locate-It<br />
LOCATE-IT 6mm KIT, Golden Tin Coated<br />
SCL-V: Violet (4 pcs.): LOC-6 Strong, 2.7kg<br />
incl. 4xSCL (one LOC-CPK: piece each), BA-SP, Locate-It MC-LOCCasting Kit, Includes:<br />
SCL-T: White (4 pcs.): Standard, 1.8kg<br />
1. MC-LOC: Metal Cap for Locate-It<br />
SCL-P: Pink (4 pcs.): Soft, LOCATE-IT 7mm KIT, Golden Tin Coated<br />
LOC-7<br />
1.2kg<br />
2. SCL-T: White (4 pcs.): Standard, 1.8kg<br />
incl. 4xSCL (one piece each), BA-SP, MC-LOC<br />
SCL-Y: Yellow (4 pcs.): Extra Soft, 0.6kg<br />
SCL-B: Black (4 pcs.): Lab Use Only<br />
3. SCL-P: Pink (4 pcs.): Soft, 1.2kg<br />
4. LOC-CPC: Casting Plastic Cap for Locate-It<br />
(Not Sold Separately)<br />
One piece each<br />
Image<br />
MC-LOC<br />
SCL-T<br />
Metal Cap for LOCATE-IT<br />
LOC-HND LOC-ROD Silicone Cap - white (standard LOC-EXT 1.8kg)<br />
LOC-PM<br />
SCL-P<br />
Silicone Cap - pink (soft 1.2kg)<br />
RDA-S/M/L<br />
LOC-IT<br />
Casting plastic cap for LOCATE-IT<br />
LOC-PIT LOC-IA<br />
HHDA-9/15<br />
LOC-CPC<br />
Description<br />
LOC-INS-KIT: Locate-It Instruments for<br />
Silicones Kit, Includes:<br />
1. LOC-HND: Handle for inserting silicone caps<br />
2. LOC-ROD: Inserter rod for silicone caps<br />
3. LOC-EXT: Retentive caps extractor<br />
LOC-PM: Parallelometer Mandel<br />
RDA-S/M/L: Ratchet Driver for Hex 1.29<br />
HHDA-9/15: Hand Hex Driver for Abutments<br />
LOC-IT: Impression Transfer<br />
LOC-PIT: Pick-up Impression Transfer<br />
LOC-IA: Analog for Locate-It<br />
15
lti Unit<br />
Art. No.<br />
Prosthetics<br />
All On 4 / All On 6 Multi Unit, Straight Multi Unit<br />
ACCESSORIES<br />
Ball Ball Attachments<br />
1mm<br />
MUL-17-1<br />
lti MUL-17-2 Unit<br />
MUL-17-3<br />
Art. No.<br />
MUL-30-1<br />
MUL-BA-1 MUL-30-1<br />
MUL-BA-2 MUL-30-2<br />
MUL-30-3<br />
Image<br />
Item No.<br />
Description<br />
MUL-17-1<br />
17˚<br />
2mm<br />
3mm<br />
MUL-17-2<br />
IVORY ON 4/ ON 6 MULTI UNIT 17˚/1mm<br />
Golden Tin Coated, incl. Carrier, 2 x MUL-SMU<br />
IVORY ON 4/ ON 6 MULTI UNIT 17˚/2mm<br />
Golden Tin Coated, incl. Carrier, 2 x MUL-SMU<br />
MUL-17-3<br />
IVORY ON 4/ ON 6 MULTI UNIT 17˚/3mm<br />
Golden Tin Coated, incl. Carrier, 2 x MUL-SMU<br />
Description<br />
1mm<br />
2mm<br />
ORIES<br />
2mm<br />
achments<br />
1mm<br />
30˚<br />
MUL-30-1<br />
3mm<br />
17˚<br />
3mm<br />
IVORY ON 4/ ON 6 MULTI UNIT 30˚/1mm<br />
Golden Tin Coated, MUL-30-2<br />
incl. Carrier, 2 x MUL-SMU<br />
IVORY<br />
IVORY<br />
ON<br />
ON<br />
4/<br />
4/<br />
ON<br />
ON<br />
6<br />
6<br />
MULTI<br />
MULTI<br />
UNIT<br />
UNIT<br />
17˚/1mm<br />
30˚/2mm<br />
Golden<br />
Golden<br />
Tin<br />
Tin<br />
Coated,<br />
Coated,<br />
incl.<br />
incl.<br />
Carrier,<br />
Carrier,<br />
2<br />
2<br />
x<br />
x<br />
MUL-SMU<br />
MUL-SMU<br />
IVORY<br />
IVORY<br />
ON<br />
ON<br />
4/<br />
4/<br />
ON<br />
ON<br />
6<br />
6<br />
MULTI<br />
MULTI<br />
UNIT<br />
UNIT<br />
17˚/2mm<br />
30˚/3mm<br />
Golden<br />
Golden<br />
Tin<br />
Tin<br />
Coated,<br />
Coated,<br />
incl.<br />
incl.<br />
Carrier,<br />
Carrier,<br />
2<br />
2<br />
x<br />
x<br />
MUL-SMU<br />
MUL-SMU<br />
2mm<br />
Silicone 1mmCaps for Ball Attachments<br />
3mm<br />
1mm<br />
2mm<br />
Ball Attachment for IVORY on 4/ on 6, 1mm<br />
IVORY ON 4/ ON 6 MULTI UNIT 30˚/1mm<br />
Golden Tin Coated, incl. SCB-P, BA-SP, MCB<br />
Golden Tin Coated, incl. Carrier, 2 x MUL-SMU<br />
IVORY ON 4/ ON 6 MULTI UNIT 30˚/2mm<br />
Ball Attachment for IVORY on 4/ on 6,2mm<br />
Golden Tin Coated, incl. Carrier, 2 x MUL-SMU<br />
Golden Tin Coated, incl. SCB-P, BA-SP, MCB<br />
IVORY ON 4/ ON 6 MULTI UNIT 30˚/3mm<br />
Golden Tin Coated, MUL-BA-2<br />
incl. Carrier, 2 x MUL-SMU<br />
Description<br />
On 4 / On 6 Multi Unit<br />
Golden Tin Coated<br />
17 Degree<br />
1, 2, or 3mm<br />
Includes Carrier:<br />
MUL-SMU (Qty 2)<br />
MUL-17-1 MUL-30-2<br />
MUL-17-2 MUL-30-3<br />
MUL-17-3<br />
Picture<br />
IVORY ON 4/ ON MUL-30-3<br />
6 MULTI UNIT 17˚/3mm<br />
Golden Tin Coated, incl. Carrier, 2 x MUL-SMU<br />
Art. No. Description<br />
30˚<br />
Picture Picture Art. No. Art. No. Description Description<br />
Silicone Silicone Caps Caps for Ball for Attachments<br />
Ball Attachments<br />
On 4 / On 6 Multi Unit<br />
Golden Tin Coated<br />
30 Degree<br />
1, 2, or 3mm<br />
Includes Carrier:<br />
MUL-SMU (Qty 2)<br />
Ball Attachment for<br />
On 4 / On 6,<br />
1 or 2mm<br />
Golden Tin Coated<br />
MUL-BA-1<br />
Includes 1- SCB-P,<br />
RETENTION 1 /- adhesive BA-SP, 1 - strength MCB / grip<br />
(See page XX)<br />
Image<br />
Strong MC-LOC<br />
Locate-It for On 4/ On 6<br />
MUL-LOC-05<br />
Strong<br />
0.5, 1, or 2mm MC-LOCSCL-V<br />
M<br />
Picture<br />
A<br />
Golden Tin Coated Strong<br />
SCL-V SCL-T<br />
4<br />
Includes 4 - SCL (1 Each),<br />
Silicone MC-LOC Caps SCL-V for LOM<br />
1- BA-SP, 1 - MC-LOC SCL-T SCL-P<br />
4<br />
MUL-LOC-1<br />
SCL-V SCL-T 4<br />
SCL-P SCL-Y<br />
4<br />
SCL-T SCL-P 4<br />
SCL-Y SCL-B<br />
4<br />
SCL-P SCL-Y 4<br />
MUL-LOC-2<br />
SCL-B BA-SP 4<br />
SCL-Y SCL-B 4<br />
RETENTION RETENTION / adhesive / adhesive strength strength / grip / grip BA-SP<br />
Se<br />
Accessories<br />
SCL-B<br />
& Tools for BA-SP LOCAT 4<br />
Accessories & Tools<br />
Accessories & Tools for<br />
BA-SP<br />
LOCATE-IT Se<br />
MUL-SAM-1 Straight Connection<br />
Abutment Accessories for & Tools for LOCAT<br />
LOC-PIT<br />
Accessories Golden Tin<br />
Pick-up & Tools Coated<br />
impression for LOC-PIT LOCATE-IT transfer<br />
Multi LOC-PIT Unit for MUL17/30<br />
LOCATE-ITPick-up impression tran<br />
MUL-SAM-2<br />
Pick-up 1 impression or 2mmtransfer<br />
for LOCATE-IT<br />
high high<br />
SCB-B SCB-B<br />
SCB-G SCB-G<br />
SCB-Y SCB-Y<br />
SCB-P SCB-P<br />
SCB-T SCB-T<br />
BA-SP BA-SP<br />
Item No.<br />
ACCESSORIES<br />
ACCESSORIES<br />
LOCATE-IT<br />
LOCATE-IT<br />
LOCATE-IT<br />
ACCESSORIES<br />
LOCATE-IT<br />
Picture<br />
Art. No.<br />
Picture<br />
Picture Art. No. D<br />
Silicone Caps for LOCATE-IT<br />
Picture Silicone Caps Art. No. for LO<br />
Silicone ACCESSORIES<br />
Caps for LOCATE-IT<br />
Picture Art. No. D<br />
Silicone Caps for LOCATE-IT<br />
LOCATE-IT<br />
Description<br />
Silicone Caps for LOCATE-IT Strong<br />
LOC-PIT<br />
for LOCATE-IT<br />
Pick-up impression transfer<br />
LOC-PIT for LOCATE-IT<br />
Pick-up impression transfer<br />
for LOCATE-IT<br />
LOC-IA<br />
low<br />
Accessories & Tools<br />
Silicone Cap for<br />
Analog<br />
Ball<br />
for<br />
Attachment<br />
LOCATE-IT<br />
Silicone Cap for Ball Attachment LOC-IA<br />
MUL-SCA-1<br />
- Black - (4 Blac pc<br />
LOC-IA<br />
Analog for LOCATE-IT<br />
For Lap For use Lap only use only<br />
Analog for LOCATE-IT<br />
LOC-IA<br />
Analog for LOCATE-IT<br />
MUL-SCA-2 Silicone Silicone Cap LOC-IT for Cap Ball for (Individual Attachment Ball Attachment Tray Impression / Pick - Yellow Up Transfer Impression - Yello (4 p<br />
Very elastic, Very elastic, Impression Retention Retention Transfer 500-550gr. 500-550gr.<br />
(Individual Tray / Pick U<br />
Straight Connection<br />
Silicone Silicone Cap<br />
LOC-IT (Individual Tray LOC-IA / Pick Up Impression<br />
for Cap Ball for Attachment Ball Attachment - Pink -(4 Pink pcs<br />
Impression Abutment Transfer for Analog for LOCATE-IT<br />
Elastic, Elastic, Retention (Individual Retention 800-950gr<br />
Multi<br />
800-950gr<br />
Tray<br />
Unit<br />
/ Pick Up Impression)<br />
1, 2, 3, or 4 mm<br />
MUL-SCA-3 Silicone Silicone Cap for Cap Ball for Attachment Ball Attachment - Transpare - Slightly Slightly elastic, elastic, Retention Retention 1200-1300gr 1200-1300gr<br />
lo<br />
LOC-PIT<br />
Silicone Silicone Cap LOC-IA for Cap Ball for Attachment Ball Attachment - Gree<br />
Pick-up<br />
- Green<br />
impression<br />
(4<br />
tran<br />
p<br />
Extremely Extremely elastic,<br />
Analog elastic, for<br />
Retention<br />
LOCATE-IT Retention less for LOCATE-IT 500gr less 500gr<br />
LOC-IT<br />
Impression Transfer LOC-IT<br />
LOC-IT<br />
(Individual Tray / Pick Up Impression)<br />
Impression Transfer<br />
LOC-IT<br />
Separators Separators O-Rings O-Rings for Ball for attachment<br />
Impression Ball attachment<br />
Transfer<br />
(Individual Tray / Pick U<br />
high<br />
MCB MCB<br />
low<br />
MUL-SCA-4 Metal Metal Cap for Cap Ball for Attachement<br />
Ball Attachement<br />
MUL-BA-1<br />
MUL-BA-2<br />
16<br />
1mm<br />
2mm<br />
SCB-B<br />
Ball Attachment for IVORY on 4/ on 6, 1mm<br />
Golden Tin Coated, incl. SCB-P, BA-SP, MCB<br />
SCB-G<br />
Ball Attachment for IVORY on 4/ on 6,2mm<br />
Golden Tin Coated, incl. SCB-P, BA-SP, MCB<br />
SCB-Y<br />
Tools Tools for Ball for Attachments<br />
Ball Attachments<br />
Silicone Cap for Ball Attachment - Black (4 pcs.)<br />
For Lap use only<br />
RHDA-9/15<br />
Silicone Cap for Ball Attachment - Green (4 pcs.)<br />
Ratchet Ratchet Hex Driver Hex Driver RHDA-9/15 RHDA-9/15<br />
Extremely elastic, Retention less 500gr<br />
for Hex for 1.29 Hex 1.29<br />
(See page XX)<br />
Silicone Cap for Ball Attachment - Yellow (4 pcs.)<br />
Very elastic, Retention 500-550gr.<br />
or<br />
or<br />
HHDA-9/15<br />
Hand Hand Hex Driver Hex Driv for<br />
HHDA-9/15 HHDA-9/15 for Hex fo1
Prosthetics<br />
Straight Multi Unit<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
MUL-TSCA<br />
Titanium Sleeve for<br />
Connection Abutment<br />
for Multi Unit<br />
Includes MUL-SCS<br />
OCA-05<br />
Overdenture Connection<br />
Abutment<br />
0.5mm Shoulder<br />
Includes SF-0<br />
MUL-OTSCA<br />
Open Transfer for<br />
Connection Abutment<br />
for Multi Unit<br />
Includes MUL-SOT<br />
OCA-15<br />
Overdenture Connection<br />
Abutment<br />
1.5mm Shoulder<br />
Includes SF-0<br />
MUL-SOT<br />
Screw for Open<br />
Transfer for Multi Unit<br />
Included in<br />
MUL-OTSCA<br />
OCA-25<br />
Overdenture Connection<br />
Abutment<br />
2.5mm Shoulder<br />
Includes SF-0<br />
MUL-AASCA<br />
Analog Abutment<br />
for Straight<br />
Connection Abutment<br />
for Multi Unit<br />
MUL-TTA-9<br />
Temporary Titanium<br />
9mm Abutment for<br />
Multi Unit<br />
ACA-05<br />
Anatomic Connection<br />
Abutment<br />
0.5mm Shoulder<br />
Includes TSACA-05<br />
MUL-TTA-12<br />
Temporary Titanium<br />
12mm Abutment for<br />
Multi Unit<br />
ACA-15<br />
Anatomic Connection<br />
Abutment<br />
1.5mm Shoulder<br />
Includes TSACA-15<br />
MUL-STA-9<br />
Straight Abutment for<br />
Multi Unit<br />
ACA-25<br />
BSO<br />
RHD-OD<br />
Anatomic Connection<br />
Abutment<br />
2.5mm Shoulder<br />
Includes TSACA-25<br />
Ball Screw for<br />
Overdenture<br />
for OCA<br />
Ratchet Hex Driver<br />
for Overdenture<br />
Abutment<br />
MUL-OCA-05<br />
MUL-SCS<br />
MUL-PSCA<br />
Overdenture Connection<br />
Abutment, 0.5mm<br />
Shoulder<br />
Multi Unit MUL17/30<br />
Screw for Straight<br />
Connection Abutment<br />
for Multi Unit<br />
Plastic Sleeve for<br />
Connection Abutment<br />
for Multi Unit<br />
Includes MUL-SCS<br />
17
Prosthetics<br />
Narrow Line<br />
Custom Abutments Available<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
NL-HC-2<br />
NL-HC-2N<br />
Healing Abutment<br />
Length: 2mm,<br />
Diameter: 4.5 (HC-2)<br />
or 3mm (HC-2N)<br />
NL-LOC-0.5<br />
NL-LOC-1<br />
NL-LOC-2<br />
NL-LOC-3<br />
Locate-It 0.5mm Kit<br />
Locate-It 1mm Kit<br />
Locate-It 2mm Kit<br />
Locate-It 3mm Kit<br />
NL-HC-3<br />
NL-HC-3N<br />
Healing Abutment<br />
Length: 3mm,<br />
Diameter: 4.5 (HC-3)<br />
or 3mm (HC-3N)<br />
NL-LOC-4<br />
NL-LOC-5<br />
NL-LOC-6<br />
Locate-It 4mm Kit<br />
Locate-It 5mm Kit<br />
Locate-It 6mm Kit<br />
NL-HC-4<br />
NL-HC-4N<br />
NL-HC-5<br />
NL-HC-5N<br />
Healing Abutment<br />
Length: 4mm,<br />
Diameter: 4.5 (HC-4)<br />
or 3mm (HC-4N)<br />
Healing Abutment<br />
Length: 5mm,<br />
Diameter: 4.5 (HC-5)<br />
or 3mm (HC-5N)<br />
Image<br />
Item No.<br />
NL-OCA-05<br />
NL-OCA-15<br />
NL-OCA-25<br />
Description<br />
Overdenture<br />
Connection<br />
Abutment,<br />
0.5, 1.5, or 2.5mm<br />
Shoulder<br />
NL-HC-6<br />
NL-HC-6N<br />
Healing Abutment<br />
Length: 6mm,<br />
Diameter: 4.5 (HC-6)<br />
or 3mm (HC-6N)<br />
NL-TSNA-8.3<br />
Titanium Screw 8.3mm<br />
for Narrow Line<br />
Prosthetics<br />
Image<br />
Item No.<br />
Description<br />
NL-BA-1<br />
Ball Attachment & Cap-1<br />
(Kit of 3pcs) Incl. 1 - SCB,<br />
1 - BA-SP, 1 - MCB<br />
NL-BA-2<br />
Ball Attachment & Cap-2<br />
(Kit of 3pcs) Incl. 1 - SCB,<br />
1 - BA-SP, 1 - MCB<br />
NL-BA-3<br />
Ball Attachment & Cap-3<br />
(Kit of 3pcs) Incl. 1 - SCB,<br />
1 - BA-SP, 1 - MCB<br />
NL-BA-4<br />
Ball Attachment & Cap-4<br />
(Kit of 3pcs) Incl. 1 - SCB,<br />
1 - BA-SP, 1 - MCB<br />
18
Custom Abutments Available<br />
Prosthetics<br />
Narrow Line<br />
Image<br />
Item No.<br />
Description<br />
Image<br />
Item No.<br />
Description<br />
NL-STA-10*<br />
Straight Titanium<br />
Abutment - 10mm<br />
NL-CTT-13<br />
NL-CTT-13N<br />
Closed Tray Transfer<br />
13mm or 13mm (Narrow)<br />
NL-SSTA-1*<br />
NL-SSTA-2*<br />
NL-SSTA-3*<br />
Straight Titanium<br />
Abutment,<br />
1, 2 or 3mm Shoulder<br />
NL-3DSPA-8<br />
Plastic Abutment for<br />
3D Scanner<br />
NL-ATA-15*<br />
Angulated Titanium<br />
Abutment<br />
15 Degree<br />
NL-OTT<br />
NL-OTT-13N<br />
Open Tray Transfer<br />
13mm or 13mm (Narrow)<br />
NL-PAC-H*<br />
Plastic Abutment<br />
Laboratory with Hex<br />
NL-IA-3.0<br />
Implant Analog - 3mm<br />
NL-AZA*<br />
Titanium Abutment<br />
for Casting<br />
(Narrow Line)<br />
NL-PUT-1S<br />
NL-PUT-2S<br />
Pop Up Transfer<br />
Abutments with<br />
PUP-C, 1 or 2mm<br />
*Includes NL-TSA-8.3 - Titanium Screw<br />
NL-PUT-1M<br />
NL-PUT-2M<br />
Pop Up Transfer<br />
Abutments with<br />
PUP-C, 1 or 2mm<br />
NL-PUT-1L<br />
NL-PUT-2L<br />
NL-PUT-3L<br />
NL-PUT-4L<br />
Pop Up Transfer<br />
Abutments with PUP-C<br />
1, 2, 3, or 4mm<br />
*Includes NL-TSA-8.3 - Titanium Screw<br />
19
Surgical Kit CIR's System - Complete set<br />
Professional Surgical / Kits External Irrigation Drills<br />
REF RIBUS-PE<br />
Professional Kit<br />
Item No. RIBUS-PE<br />
Available for <strong>Ritter</strong>’s CIR System, the<br />
professional kit is suitable for <strong>Ritter</strong>’s SB/LA,<br />
QSI, and TFI implants.<br />
CDEP-5.4-6, CDEP-5.4-XX<br />
8, 10, 11.5, 13<br />
CDEP-4.5-6, 8, 10, CDEP-4.5-XX 11.5, 13, 16<br />
CDEP-3.65-6, 8, 10, CDEP-3.65-XX 11.5, 13, 16<br />
CDEP-3.2-6, 8, 10, CDEP-3.2-XX 11.5, 13, 16<br />
DELD-2.0<br />
DEP-2.8-16<br />
RDI-L<br />
MMIB-<br />
MMIB-28<br />
MMIB-<br />
MMIB-22<br />
RDI-M TRU-70BG<br />
SDH<br />
DEX<br />
DP-3.75, DP-XX 4.2,<br />
5.0, 6.0<br />
RIBUS-PE CD-3.75, CD-XX4.2, 5.0, 6.0 HHDA-L<br />
MMA-28<br />
RDA-L<br />
HHDA-S<br />
MMA-22<br />
RDA-M<br />
20
Surgical Kit CIR's System - Complete set<br />
Professional for NL- Narrow Line / External Irrigation Drills<br />
REF NL-RIBUS-PE<br />
Surgical Kits<br />
Narrow Line Kit<br />
Item No. NL-RIBUS-PE<br />
Available for <strong>Ritter</strong>’s CIR System, the Narrow<br />
Line Kit is suitable for <strong>Ritter</strong>’s SB/LA, QSI, and<br />
TFI Narrow Line implants.<br />
CDEP-2.8-10, CDEP-2.8-XX 11.5, 13, 16<br />
CDEP-2.5-10, CDEP-2.5-XX 11.5, 13, 16<br />
DELD-2.0 DELD-2.0<br />
NL-MMIB- NL-MMIB- NL-RDI-<br />
NL-RDI-L NL-RDI-L NL-MMIB-28 28<br />
NL-MMIB-22 22 NL-RDI-M M<br />
TRU-<br />
TRU-70BG<br />
NL-SDH<br />
DEX DEX<br />
DP-3.0, DP-XX 3.3<br />
NL-RIBUS-PE<br />
CD-3.0, CD-XX3.3<br />
HHDA-L<br />
HHDA-S<br />
MMA-28<br />
MMA-22<br />
RDA-L<br />
RDA-M<br />
21
Surgical Kits<br />
Prosthetic Kit System / Tools<br />
REF RIB-PROS<br />
Prosthetic Kit<br />
Item No. RIB-PROS<br />
Hand Hex Driver for Prosthetics<br />
Hand Hex Driver for prosthetics<br />
1.29 Hex<br />
1.29 Hex<br />
HHDA-L (long)<br />
Drill Extender Drill Extender for for<br />
external External irrigation Irrigation drills Drills<br />
DEX DEX<br />
HHDA-S (short)<br />
Torque Ratchet<br />
70NCM with<br />
Tension Arm<br />
Benging TRU-70BG<br />
Motor Mount for for Prosthetics<br />
1.29 Prosthetics Hex 1.29 Hex<br />
MMA-28<br />
MMA-22<br />
Ratchet Driver for for Prosthetics<br />
Prosthetics 1.29 Hex 1.29 Hex<br />
RDA-L (long)<br />
RDA-S RDA-M (short)<br />
RDA-XS (x-short)<br />
22
Surgical Kits<br />
Professional Euro Kit<br />
Item No. RIBEU-PE<br />
CDEP-5.4-6, 8, 10, 11.5, 13<br />
Available for <strong>Ritter</strong>’s CIR System, the Narrow<br />
Line Kit is suitable for <strong>Ritter</strong>’s SB/LA, QSI, and<br />
TFI Narrow Line implants.<br />
CDEP-4.5-6, 8, 10, 11.5, 13, 16<br />
CDEP-3.65-6, 8, 10, 11.5, 13, 16<br />
CDEP-3.2-6, 8, 10, 11.5, 13, 16<br />
NL-MMIB-<br />
22<br />
NL-MMIB-<br />
28<br />
DELD-2.0<br />
DEP-2.8-16<br />
TRU-<br />
70BG<br />
NL-RDI-L<br />
NL-RDI- M<br />
MMIB-28<br />
MMIB-22<br />
RDI-M<br />
RDI-L<br />
DEX<br />
HHDA-L<br />
HHDA-S<br />
MMA-28<br />
MMA-22<br />
RDA-L<br />
RDA-M<br />
CDEP-2.5-10, 11.5, 13, 16 CD-3.0,3.3, 3.75, 4.2, 5.0, 6.0 DP-3.0, 3.3<br />
DP-3.75, 4.2,<br />
5.0, 6.0<br />
CDEP-2.8-10, 11.5, 13, 16<br />
23
Surgical Kits<br />
Starter Kit<br />
Item No. RIBUS-SE<br />
Available for <strong>Ritter</strong>’s CIR System, the Narrow<br />
Line Kit is suitable for <strong>Ritter</strong>’s SB/LA, QSI, and<br />
TFI Narrow Line implants.<br />
DP-5.4-16<br />
DP-4.5-16<br />
DP-3.65-16<br />
DP-3.2-16<br />
DP-2.8-16<br />
NL-MMIB-<br />
22<br />
NL-MMIB-<br />
28<br />
DP-2.5-16<br />
IDP-S<br />
NL-RDI-L<br />
NL-RDI- M<br />
MMIB-28<br />
MMIB-22<br />
LD-2.0<br />
DEP-2.0-<br />
16<br />
DS-6<br />
DS-8<br />
DS-10<br />
RDI-M<br />
RDI-L<br />
MMA-28<br />
MMA-22<br />
RDA-L<br />
RDA-M<br />
DS-11.5<br />
DS-13<br />
DEX<br />
2xPPL<br />
(long)<br />
2xPPS<br />
(short)<br />
TRU-<br />
70BG<br />
HHDA-L<br />
24
Surgical Kits Tool List<br />
Image PROF. NARROW PROS. EURO STARTER<br />
Item No.<br />
CD-3.0 Hard Bone Drill<br />
CD-3.3 Hard Bone Drill<br />
CD-3.75 Hard Bone Drill<br />
CD-4.2 Hard Bone Drill<br />
Description<br />
CD-5.0<br />
CD-6.0<br />
CDEP-2.5-10<br />
CDEP-2.5-11.5<br />
CDEP-2.5-13<br />
CDEP-2.5-16<br />
CDEP-2.8-10<br />
CDEP-2.8-11.5<br />
CDEP-2.8-13<br />
CDEP-2.8-16<br />
CDEP-3.2-6<br />
CDEP-3.2-8<br />
CDEP-3.2-10<br />
CDEP-3.2-11.5<br />
CDEP-3.2-13<br />
CDEP-3.2-16<br />
CDEP-3.65-6<br />
CDEP-3.65-8<br />
CDEP-3.65-10<br />
CDEP-3.65-11.5<br />
CDEP-3.65-13<br />
CDEP-3.65-16<br />
CDEP-4.5-6<br />
CDEP-4.5-8<br />
CDEP-4.5-10<br />
CDEP-4.5-11.5<br />
CDEP-4.5-13<br />
CDEP-4.5-16<br />
CDEP-5.4-6<br />
CDEP-5.4-8<br />
CDEP-5.4-10<br />
CDEP-5.4-11.5<br />
CDEP-5.4-13<br />
Hard Bone Drill<br />
Hard Bone Drill<br />
Conical Drill - External Irrigation | 2.5mm D | 10mm L<br />
Conical Drill - External Irrigation | 2.5mm D | 11.5mm L<br />
Conical Drill - External Irrigation | 2.5mm D | 13mm L<br />
Conical Drill - External Irrigation | 2.5mm D | 16mm L<br />
Conical Drill - External Irrigation | 2.8mm D | 10mm L<br />
Conical Drill - External Irrigation | 2.8mm D | 11.5mm L<br />
Conical Drill - External Irrigation | 2.8mm D | 13mm L<br />
Conical Drill - External Irrigation | 2.8mm D | 16mm L<br />
Conical Drill - External Irrigation | 3.2mm D | 6mm L<br />
Conical Drill - External Irrigation | 3.2mm D | 8mm L<br />
Conical Drill - External Irrigation | 3.2mm D | 10mm L<br />
Conical Drill - External Irrigation | 3.2mm D | 11.5mm L<br />
Conical Drill - External Irrigation | 3.2mm D | 13mm L<br />
Conical Drill - External Irrigation | 3.2mm D | 16mm L<br />
Conical Drill - External Irrigation | 3.65mm D | 6mm L<br />
Conical Drill - External Irrigation | 3.65mm D | 8mm L<br />
Conical Drill - External Irrigation | 3.65mm D | 10mm L<br />
Conical Drill - External Irrigation | 3.65mm D | 11.5mm L<br />
Conical Drill - External Irrigation | 3.65mm D | 13mm L<br />
Conical Drill - External Irrigation | 3.65mm D | 16mm L<br />
Conical Drill - External Irrigation | 4.5mm D | 6mm L<br />
Conical Drill - External Irrigation | 4.5mm D | 8mm L<br />
Conical Drill - External Irrigation | 4.5mm D | 10mm L<br />
Conical Drill - External Irrigation | 4.5mm D | 11.5mm L<br />
Conical Drill - External Irrigation | 4.5mm D | 13mm L<br />
Conical Drill - External Irrigation | 4.5mm D | 16mm L<br />
Conical Drill - External Irrigation | 5.4mm D | 6mm L<br />
Conical Drill - External Irrigation | 5.4mm D | 8mm L<br />
Conical Drill - External Irrigation | 5.4mm D | 10mm L<br />
Conical Drill - External Irrigation | 5.4mm D | 11.5mm L<br />
Conical Drill - External Irrigation | 5.4mm D | 13mm L<br />
25
sional for NL- Narrow Line / External Irrigation Drills<br />
EP-2.8-16<br />
ical Drills - External Irrigation<br />
m-Lmm)<br />
rill -2.5-10<br />
Extender for<br />
-2.5-11.5 ternal irrigation drills<br />
EX<br />
26<br />
HHDA (long)<br />
Surgical Kits Tool List<br />
-2.5-13<br />
Item No.<br />
Description<br />
Motor Mount for Prosthetics<br />
-2.5-16<br />
Ratchet 1.29 HexDriver for Implant<br />
DELD-2.0<br />
andard Drill 2.0 External Irrigation Hex MMA-28 2.0<br />
Lance 2 in 1 (Ømm)<br />
DEP-2.0-16 NL-RDI-L (long)<br />
MMA-22<br />
ELD-2.0 -2.8-10<br />
DEP-2.5-16<br />
NL-RDI-M (short)<br />
-2.8-11.5<br />
DEP-2.8-16<br />
Ratchet Driver for Prosthetics<br />
-2.8-13<br />
ard Bone Drills for <strong>Implants</strong> DEP-3.2-161.29 Hex<br />
-2.8-16<br />
RDA-L mm)<br />
Hand Hex (long) Driver for prosthetics<br />
D-3.0<br />
DEP-3.65-16<br />
1.29 Hex<br />
D-3.3<br />
HHDA RDA-M (long) (short)<br />
D-3.3<br />
Image PROF. NARROW PROS. EURO STARTER<br />
DEP-4.5-16<br />
Hand Hex Driver for prosthetics<br />
1.29 Hex<br />
HHDA (long)<br />
NL-MMIB-28<br />
HHDA-S (short)<br />
NL-MMIB-22<br />
Standard Drill 2.8mm D | 16mm L | External Irrigation<br />
Standard Drill 3.2mm D | 16mm L | External Irrigation<br />
Standard Drill 3.65mm D | 16mm L | External Irrigation<br />
Standard Drill 4.5mm D | 16mm L | External Irrigation<br />
Extender for<br />
DEP-5.4-16 Standard Drill 5.4mm D | 16mm L | External Irrigation<br />
HHDA-S (short)<br />
rnal irrigation drills<br />
irection Pins for <strong>Implants</strong> DEX Drill Extender for External Irrigation Torque Drills<br />
Ratchet<br />
.9Ømm/Ømm)<br />
70NCM with<br />
-3.0<br />
DP-3.0Motor Direction Mount for Pins Prosthetics<br />
for 3.0mm D <strong>Implants</strong><br />
Benging Arm<br />
TRU-70BG<br />
1.29 Hex<br />
-3.3<br />
DP-3.3 Direction Pins for 3.3mm D <strong>Implants</strong><br />
dard Drill 2.0 External Irrigation MMA-28<br />
nce 2 in 1 (Ømm)<br />
DP-3.75 Direction Pins for 3.75mm D <strong>Implants</strong><br />
MMA-22<br />
-2.0<br />
DP-4.2 Direction Pins for 4.2mm D <strong>Implants</strong><br />
NL-MMIB-28<br />
Self Loading -Hex 2.0<br />
Mount for Implant<br />
Motor 2.0 -Hex Loading Self<br />
Bone Drills for <strong>Implants</strong><br />
m)<br />
.0<br />
.3<br />
DP-5.0<br />
(long)<br />
Hex 2.0 NL-RDI-L<br />
Driver for Implant<br />
Ratchet 2.0 Hex<br />
ction Pins for <strong>Implants</strong><br />
mm/Ømm)<br />
.0<br />
.3<br />
Direction Pins for 5.0mm D <strong>Implants</strong><br />
DP-6.0RDA-L (long) Direction Pins for 6.0mm D <strong>Implants</strong><br />
DS-6 RDA-M Drill (short) Stopper 6mm (Universal)<br />
DS-8<br />
DS-10<br />
DS-11.5<br />
DS-13<br />
(long)<br />
1.29 Hex<br />
HHDA<br />
Hex Driver for prosthetics<br />
Hand 1.29<br />
HHDA-L<br />
HHDA-S<br />
IDP-S<br />
LD-2.0<br />
MMA-22<br />
MMA-22<br />
MMA-28<br />
MMA-28<br />
MMA-28<br />
MMIB-22<br />
MMIB-28<br />
(long)<br />
1.29 Hex<br />
RDA-L<br />
Driver for Prosthetics<br />
Ratchet Hex 1.29<br />
(short)<br />
RDA-M<br />
(long)<br />
RDA-L<br />
Motor Mount for Implant<br />
Self Loading -Hex 2.0<br />
Drill Stopper 8mm (Universal)<br />
Drill Stopper 10mm (Universal)<br />
Drill Stopper 11.5mm (Universal)<br />
Drill Stopper 13mm (Universal)<br />
DELD-2.0 & Lance 2 in 1 (Ømm)<br />
Drill 2.0 External Irrigation<br />
Standard (Ømm) 1 in 2 Lance &<br />
Surgical Kit CIR's System -Tools<br />
-Tools<br />
System CIR's Kit Surgical<br />
for NL- Narrow Line / External Irrigation Drills<br />
Professional for NL- Narrow Line / External Irrigation Drills<br />
Professional<br />
Motor Mount for Implant<br />
CDEP-2.8-10<br />
CDEP-2.8-10<br />
CDEP-2.8-11.5<br />
CDEP-2.8-11.5<br />
CDEP-2.8-13<br />
CDEP-2.8-13<br />
Hand Hex Driver for prosthetics<br />
CDEP-2.8-16<br />
CDEP-2.8-16<br />
Drill Extender for<br />
for<br />
Extender Drill<br />
HHDA-S (short)<br />
(short)<br />
HHDA-S<br />
CDEP-2.5-10<br />
(Ømm-Lmm)<br />
Drills - External Irrigation<br />
Conical (Ømm-Lmm)<br />
Conical Drills - External Irrigation<br />
CDEP-2.5-11.5<br />
CDEP-2.5-10<br />
NL-MMIB-22<br />
NL-MMIB-28<br />
NL-MMIB-22<br />
CDEP-2.5-13<br />
CDEP-2.5-11.5<br />
CDEP-2.5-16<br />
CDEP-2.5-13<br />
Ratchet Driver for Implant<br />
CDEP-2.5-16<br />
NL-RDI-L (long)<br />
NL-RDI-M (short)<br />
(short)<br />
NL-RDI-M<br />
HHDA (long)<br />
DEX external irrigation drills<br />
drills<br />
irrigation external<br />
DEX<br />
1.29 Hex Motor Mount for Prosthetics<br />
Prosthetics<br />
for Mount Motor<br />
1.29 Hex<br />
Standard Drill 2.0 External Irrigation<br />
MMA-22<br />
Ratchet Driver for Prosthetics<br />
Multi Purpose 2.0 Lance Starter Marking Drill<br />
DELD-2.0<br />
(Ømm) Hard Bone Drills for <strong>Implants</strong><br />
<strong>Implants</strong><br />
for Drills Bone Hard<br />
CD-3.0<br />
(Ømm) CD-3.0<br />
RDA-M (short)<br />
Standard Drill 2.0mm D | 16mm L | External Irrigation<br />
Standard Drill 2.5mm D | 16mm L | External Irrigation<br />
Ratchet Driver for Prosthetics<br />
1.29 Hex<br />
Hand Hex Driver for Prosthetics, Hex 1.29, Long<br />
Hand Hex Driver for Prosthetics, Hex 1.29, Short<br />
Implant Deep Probe - single end<br />
Lance Drill 2.0 - 16mm L<br />
Torque Ratchet<br />
70NCM with<br />
Benging Arm<br />
TRU-70BG<br />
Motor Mount 22mm L for Prosthetics (for Hex 1.29)<br />
Motor Mount 28mm L for Prosthetics (for Hex 1.29)<br />
Motor Mount 22mm L for Implant (for Hex 2.43)<br />
Motor Mount 28mm L for Implant (for Hex 2.43)<br />
CD-3.3<br />
CD-3.3<br />
Screw Driver<br />
for Implant<br />
Hex-20 (NL)<br />
NL-SDH
Drill Extender for<br />
external irrigation drills<br />
T<br />
7<br />
Tor<br />
Be B<br />
Be To<br />
7<br />
B<br />
Item No.<br />
Description<br />
Surgical Kits Tool List<br />
Image PROF. NARROW PROS. EURO STARTER<br />
Hand Hex Driver for prosthetics<br />
NL-RDI-L (long)<br />
(long)<br />
Hex 2.0 HHDA CDEP-2.8-11.5<br />
Hex 2.0<br />
1.29<br />
CDEP-2.8-13<br />
NL-RDI-M (short)<br />
Hex<br />
CDEP-2.5-16<br />
Ratchet Driver for Implant<br />
CDEP-2.8-10<br />
Ratchet Implant<br />
for Driver DEX<br />
CDEP-2.8-11.5<br />
CDEP-2.5-16<br />
& Lance 2 in 1 (Ømm)<br />
DEX<br />
DELD-2.0<br />
CD-3.0 external irrigation drills<br />
Drill 2.0 External Standard Irrigation<br />
external irrigation drills<br />
Drill Extender for<br />
(Ømm) for<br />
Extender Drill<br />
& <strong>Implants</strong><br />
for Drills Bone Hard (Ømm) 1 in 2 Lance<br />
DEX<br />
Extender for<br />
CDEP-2.8-10 Drill<br />
CDEP-2.8-16<br />
Motor Mount for Prosthetics<br />
Drill 2.0 External Irrigation<br />
Standard<br />
DEX<br />
MMA-28<br />
Hex<br />
1.29 Hex 1.29 Hex 1.29<br />
RDA-L (long)<br />
MMA-22<br />
Hex 1.29<br />
Motor Mount for Prosthetics<br />
Prosthetics<br />
for Driver Ratchet<br />
(long)<br />
1.29<br />
RDA-L<br />
Hex<br />
Hex 1.29<br />
CDEP-2.8-10<br />
(Ømm-Lmm)<br />
CDEP-2.5-16 Conical Drills - Irrigation<br />
External CDEP-2.5-11.5<br />
CDEP-2.8-16<br />
CDEP-2.5-10<br />
CDEP-2.5-13<br />
Irrigation<br />
External - Drills Conical<br />
CD-3.3<br />
MMA-22 RDA-L (long)<br />
(Ømm)<br />
RDA-M & Lance 2 in 1 (Ømm)<br />
(1.9Ømm/Ømm)<br />
Bone for <strong>Implants</strong><br />
1.29 Hex<br />
Hard Bone Drills<br />
(short)<br />
DELD-2.0<br />
for <strong>Implants</strong><br />
Hard Drills 1.29 Hex MMA-22<br />
Drill 2.0 External & Irrigation<br />
Lance MMA-28<br />
2 in 1 (Ømm)<br />
Ratchet Driver for Prosthetics<br />
CD-3.0 Standard <strong>Implants</strong><br />
for Pins Direction<br />
MMA-28<br />
Irrigation<br />
External 2.0 Drill Standard Prosthetics<br />
for Driver Ratchet<br />
Hex 1.29<br />
CDEP-2.5-10<br />
CDEP-2.5-16<br />
(Ømm-Lmm)<br />
NL-MMIB-28<br />
Loading -Hex 2.0<br />
Self<br />
NL-RDI-M (short)<br />
Professional for NL- Narrow / External Irrigation Drills<br />
Line<br />
NL-MMIB-28<br />
CDEP-2.5-10<br />
CDEP-2.5-13<br />
(Ømm-Lmm)<br />
-Hex CDEP-2.8-10<br />
2.0<br />
Surgical Kit CIR's System -Tools<br />
NL- Narrow Line for / Professional External Self Irrigation Loading Drills<br />
Implant<br />
for Mount Motor Irrigation<br />
External - Drills Conical (long)<br />
NL-RDI-L NL-MMIB-22<br />
CDEP-2.5-11.5<br />
Ratchet Driver for Implant<br />
CDEP-2.5-11.5<br />
NL-MMIB-22<br />
Professional for NL- Narrow Line / External Irrigation Drills<br />
Conical Drills - External Irrigation Motor Mount for Implant<br />
CDEP-2.8-11.5<br />
CDEP-2.5-16<br />
(long)<br />
Motor NL-RDI-L Mount for Implant<br />
NL-MMIB-28<br />
2.0 Hex<br />
Hand Hex Driver for prosthetics<br />
CDEP-2.8-11.5<br />
HHDA CDEP-2.5-10<br />
(long)<br />
NL-MMIB-28<br />
(short)<br />
Hex 2.0 NL-RDI-M<br />
1.29 Hex<br />
(Ømm-Lmm)<br />
Self Loading -Hex 2.0<br />
CDEP-2.5-13<br />
CDEP-2.5-10<br />
NL-MMIB-28<br />
for Implant<br />
NL-MMIB-22 Mount Motor for Driver Ratchet<br />
NL-RDI-M<br />
NL-RDI-L<br />
NL-SDH<br />
PPL<br />
PPS<br />
RDA-S<br />
(short)<br />
RDA-M<br />
1.29 Hex<br />
MMA-28<br />
(short)<br />
HHDA-S (short)<br />
Motor Mount for Prosthetics<br />
HHDA-S<br />
Hex 1.29<br />
RDA-M<br />
RDA-L<br />
RDI-M<br />
Ratchet Driver for Implant<br />
Hex 2.0<br />
Ratchet Driver for Implant, Medium<br />
Ratchet Driver for Implant, Long<br />
Hand Hex Driver for 2.0 (Narrow)<br />
Parallel Pin Guide - 16mm (Long)<br />
Parallel Pin Guide - 10mm (Short)<br />
Ratchet Driver for Prosthetics, Short for Hex 1.29mm<br />
Ratchet Driver for Prosthetics, Medium for Hex 1.29mm<br />
(Ømm)<br />
Drills <strong>Implants</strong><br />
DELD-2.0 for Bone Hard<br />
& in Lance 1 DELD-2.0<br />
(Ømm)<br />
2<br />
Irrigation<br />
External 2.0 Drill Standard DEX CD-3.3<br />
Ratchet Driver for Prosthetics, Long for Hex 1.29mm<br />
Ratchet Driver for Implant, Medium for Hex 2.43mm<br />
(Ømm-Lmm)<br />
CDEP-2.8-13<br />
NL-RDI-L (long)<br />
(short)<br />
NL-RDI-M<br />
2.0 Hex (short)<br />
HHDA-S<br />
Hand Hex Driver for prosthetics<br />
Prosthetics<br />
for Mount Motor<br />
HHDA-S (short)<br />
(long)<br />
MMA-22<br />
Hand Hex Driver for prosthetics<br />
Ratchet Driver for Prosthetics<br />
(long)<br />
HHDA (long)<br />
HHDA<br />
Motor Mount for Prosthetics<br />
CD-3.0<br />
RDA-L (long)<br />
DELD-2.0 CD-3.0<br />
RDI-L<br />
RDA-M (short)<br />
(long)<br />
RDA-L<br />
(long)<br />
RDA-L<br />
Hex 1.29<br />
SDH<br />
TRU-70BG<br />
RDA-M (short)<br />
Ratchet Driver for Prosthetics<br />
Hard Bone Drills for <strong>Implants</strong><br />
CD-3.3<br />
CD-3.3<br />
CD-3.3<br />
Ratchet Driver for Implant, Long for Hex 2.43mm<br />
Hand Hex Driver, 2.43mm<br />
CD-3.0 CD-3.0<br />
CD-3.3<br />
CD-3.3(1.9Ømm/Ømm)<br />
<strong>Implants</strong><br />
for Pins Direction<br />
70NCM Torque Ratchet with Tension Arm<br />
Direction Pins for <strong>Implants</strong><br />
(1.9Ømm/Ømm)<br />
CD-3.3<br />
Tor<br />
7<br />
CD-3.0<br />
CD-3.3<br />
Self Loading -Hex 2.0<br />
CDEP-2.8-16<br />
external irrigation drills<br />
CDEP-2.5-13<br />
CDEP-2.5-13<br />
CDEP-2.8-13<br />
Drill CDEP-2.8-10 CDEP-2.5-11.5<br />
Extender<br />
NL-MMIB-22<br />
for<br />
CDEP-2.5-16<br />
Ratchet Driver for Implant<br />
(long)<br />
NL-RDI-L NL-MMIB-22<br />
CDEP-2.5-11.5<br />
(Ømm)<br />
CD-3.0<br />
CD-3.0<br />
CD-3.3<br />
NL-MMIB-22<br />
NL-MMIB-28<br />
Motor Mount 22mm L for Implant (for Hex 2.0 Narrow)<br />
Motor Mount 28mm L for Implant (for Hex 2.0 Narrow)<br />
MMA-28<br />
NL-RDI-M (short)<br />
NL-RDI-M Hand (short) Hex Driver prosthetics<br />
for<br />
(short)<br />
1.29 HHDA-S CDEP-2.8-10<br />
Hex<br />
CDEP-2.8-13<br />
Hex 1.29<br />
(long)<br />
NL-RDI-L<br />
DELD-2.0 CDEP-2.8-13<br />
Drill Extender for<br />
& Lance 2 DEX in 1 (Ømm)<br />
1.29 Hex<br />
CDEP-2.8-11.5<br />
HHDA (long)<br />
CDEP-2.8-11.5<br />
CDEP-2.8-16<br />
Irrigation<br />
External 2.0 Drill Standard drills<br />
irrigation external<br />
Motor Mount for Prosthetics<br />
MMA-28<br />
MMA-22<br />
external irrigation drills<br />
CDEP-2.8-16 CDEP-2.8-16<br />
CDEP-2.8-13<br />
Surgical Kit CIR's System -Tools<br />
Hand Hex Driver for prosthetics<br />
1.29 Hex<br />
RDA-M (short)<br />
(short)<br />
RDA-M<br />
Ratchet Driver for Prosthetics<br />
(1.9Ømm/Ømm)<br />
Hard Bone Drills for <strong>Implants</strong><br />
(Ømm) <strong>Implants</strong><br />
for Pins Direction<br />
CD-3.0<br />
CD-3.0 Direction Pins for <strong>Implants</strong><br />
CD-3.3<br />
(Ømm) CD-3.0<br />
Direction Pins for <strong>Implants</strong><br />
(1.9Ømm/Ømm)<br />
Surgical Kit CIR's System -Tools<br />
Self Loading -Hex 2.0<br />
HHDA-S (short)<br />
MMA-22<br />
CD-3.3<br />
27
Introducing The NEW Start Up Package!<br />
20 <strong>Implants</strong><br />
+ Prosthetic Pack:<br />
Select Any 2 Per Implant<br />
Final<br />
Abutment<br />
Implant<br />
Analog<br />
Impression<br />
Coping<br />
Healing<br />
Abutment<br />
Each Package Includes<br />
1 Surgical Kit<br />
Package Price: $4,999<br />
Over $5,000 in Savings!<br />
DISTRIBUTION CENTER<br />
<strong>Ritter</strong> Dental USA<br />
4310 West Avenue<br />
San Antonio, Texas 78213<br />
Phone 1.855.807.8111<br />
MANUFACTURER<br />
<strong>Ritter</strong> <strong>Implants</strong> GmbH & Co. KG<br />
Gruener Weg 32<br />
88400 Biberach, Germany<br />
Phone 0049 7351 52 925-61<br />
<strong>Ritter</strong><strong>Implants</strong>.com • <strong>Ritter</strong>DentalUSA.com