eldo_user

IBIS Component
Instantiates an IBIS component name within the specified IBIS file.
Syntax
IBIS Models Support in Eldo
IBIS Component
_IO_xx file="path" component="component_name"
+ [limit_k_factors=POWER|NO|YES] [corner=TYP|MIN|MAX|FAST|SLOW]
+ [warn=ON|OFF] [nowarn]
+ [model_selector='msel_1=mdl_1 [,..., msel_n=mdl_n]'] [msel_mode=value]
+ [package=0|1|2|3|4|OFF|CMPNT|PIN|PKGMOD|MIX]
+ [pkg_model="pkg_model_name"]
+ [ss_group='ON|OFF G1 [,..., Gn]'] [nopseudo]
+ [use_fall_wvf=0|1|2] [use_rise_wvf=0|1|2]
+ [c_comp_pu=value] [c_comp_pd=value] [c_comp_pc=value]
+ [c_comp_gc=value] [all_sm=YES|NO]
+ [keep_vds_monotonic=NO|YES] [keep_vgs_monotonic=NO|YES]
+ [rx_logic=0|1]
+ [eldova=ON|OFF] [em_libname="logical_lib_name"]
+ [table_tune=value]
+ [logic_one=value] [logic_zero=value]
+ [c_fixture=YES|NO]
+ [keep_monotonic=YES|NO]
+ [switch_isso=ON|OFF] [switch_composite_current=ON|OFF]
+ [check_model_spec=ON|OFF] [ibischk_soft=NO|YES]
Parameters
Some parameters are part of the IBIS standard, please refer to description in “IBIS Device
Standards” on page 732.
• _IO_xx
IBIS instance name.
• file="path"
Specifies the path to the file that contains an IBIS formatted model.
This can be the full path (for example, /user/test/Models/model.ibs), a relative path, or just a
file name. Both / and \ should be acceptable as separators in the path name (for the UNIX
and NT versions). Avoid any spaces between the quotes and the file name/path. An Eldo
option IBIS_SEARCH_PATH is available to specify the path to the directory to search for
the IBIS files.
• component="component_name"
Specifies a component name within the specified IBIS file. The component name is casesensitive.
• limit_k_factors=POWER|NO|YES
POWER
Prevent current flow in the power terminals, a_puref and a_pdref, from being nonmonotonic.
This is the default.
NO
Eldo® User's Manual, 15.3 765