10.06.2016 Views

eldo_user

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Eldo Premier<br />

Enabling Eldo Premier<br />

Enabling Eldo Premier<br />

To activate Eldo Premier, use either of the following methods:<br />

• Specify .OPTION PREMIER inside the netlist.<br />

• Use the -premier command line argument when invoking Eldo.<br />

Eldo Premier supports most of the same SPICE netlists and commands as Eldo Classic. Eldo<br />

Premier is available for DC and transient simulations. When activated, the entire circuit is<br />

simulated by the Eldo Premier kernel; nothing is solved by the Eldo Classic or ADiT kernels.<br />

Some simulations (AC and noise for example) cause Eldo Classic to be activated (see<br />

“Supported Commands” on page 74).<br />

The command line flag, -use_proc, activates multi-threaded simulation on multi-core machines.<br />

You can request a specific number of cores, half of those available, or all of them. The number<br />

of cores is limited to 16.<br />

The Eldo Premier simulator runs DC and transient analysis, including the save and restart<br />

capabilities (frequency based analyses perform well in Eldo Classic).<br />

Automatic Activation of Eldo Premier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64<br />

Using Eldo Classic DC Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66<br />

Handling Matrix-Like Circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67<br />

Solver Generation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68<br />

Automatic Activation of Eldo Premier<br />

You can set Eldo (or Questa ADMS) to automatically choose the most appropriate and efficient<br />

simulation kernel between Eldo Classic and Eldo Premier, based on the characteristics of the<br />

netlist (number of nodes, number of devices, connectivity, commands).<br />

To enable automatic Eldo Premier activation, use either of the following methods:<br />

• Specify .OPTION AUTO[_SELECT] inside the netlist.<br />

• Specify the -auto[_select] command line argument when invoking Eldo.<br />

The weight of the following criteria is evaluated to decide which kernel to select automatically:<br />

• Number of nodes<br />

The more nodes the netlist contains, the more likely it is that Eldo Premier is selected. If<br />

the netlist contains more than 1 million nodes, then Eldo Premier is always selected; if<br />

the netlist contains less than 500 nodes, then Eldo Classic is always selected.<br />

• Number of devices<br />

64<br />

Eldo® User's Manual, 15.3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!