eldo_user

Related Topics
EZwave Joint Waveform Database (JWDB)
Displaying Eldo Simulation Data in EZwave
Analyzing Simulation Results
Complete Eldo Simulation and View Simulation Data Later
Complete Eldo Simulation and View Simulation
Data Later
In this scenario, the Eldo simulator runs a complete simulation and outputs the data in JWDB
format to be read by EZwave. In EZwave, the data can be organized and the window contents
can then be saved for later viewing.
Procedure
1. Invoke Eldo simulator as in the following example:
eldo test.cir
This command invokes the Eldo simulator and directs it to run a complete simulation
and output the data to a file.
Alternatively, if you want to reuse the JWDB server launched by Eldo for other Eldo
simulations, use the -jwdb_servermode argument as in the following example:
eldo test.cir -jwdb_servermode
This setting can also be specified in the eldo.ini file. Refer to “Eldo Initialization File”
on page 51 for further details.
2. To display simulation results, invoke EZwave.
3. In EZwave, use the File > Open menu to open the JWDB file generated by the
simulator. The waveform data appears.
You can organize data in different graph rows and create some post processing
waveforms. You can save the window contents using the File > Save option and then
reuse the “saved window” .swd file later on.
Note
For this release, the following limitations apply for this scenario:
• The post-processed waveform is not automatically updated during the simulation.
• If EZwave still displays data at the end of the simulation, the data is “reloaded” from
the disk. This can be time-consuming.
• Having EZwave display multiple-run simulation results may lead to internal errors.
Eldo® User's Manual, 15.3 373