eldo_user

Results
Setting Up An Analysis
Viewing Power Analysis Results Example
3. Expand the set of power analysis results in the Waveform List Panel, right-click on the
POWER_TRAN folder and from the waveform pop-up choose Power Analysis to open
the Power Analysis dialog. (The dialog can also be opened from the main menu Tools >
Power Analysis.)
4. Click the Analyze button. The hierarchical tree view is populated with the power
waveform results from the design. As defined in the netlist in this case, the visible
columns are: sum, type, maximum, and average. You can also view the results in a list
view, with the full hierarchical name for each item.
5. If you change any of the settings in the dialog, for example the power thresholds or
analysis range, you need to click the Analyze button for the changes to take effect.
• Use the Filter Names field and click the Filter button to only list the results of names
matching the specified term. Clear the Filter Names field and click the Filter button
again to show all names. Some columns, for example Type and Mode, can be
filtered individually, by right-clicking on the column and choosing the items to
show.
• By default, Use Color Scaling is selected enhancing the results to easily show
problematic areas with a color scale.
6. Select the Save As to save the results as a CSV or text file.
Figure 6-22 shows the Power Analysis dialog in EZwave with color scaling enabled.
Eldo® User's Manual, 15.3 281