eldo_user

AC Analysis Results
Setting Up An Analysis
AC Analysis
The results of AC analysis runs are output using .EXTRACT, .PLOT, .PRINT, and .PROBE
commands.
The amount of information in the .chi file relating to operating point can be limited using the
option PRINT_ACOP.
Use option ACOUT to control how complex expressions VX(a,b) and IX(a,b) are computed in
AC analysis for their decibel magnitude, magnitude, phase, and group delay values.
Figure 6-3 shows an example AC analysis waveform output from a .PLOT statement:
Figure 6-3. AC Analysis Plot for an LCR Circuit
Related Commands
• .AC in the Eldo Reference Manual
• .MPRUN in the Eldo Reference Manual
• .OPTION ACOUT in the Eldo Reference Manual
• .OPTION PRINT_ACOP in the Eldo Reference Manual
Related Topics
Operating Point Analysis
Adaptive AC Analysis Example
Eldo® User's Manual, 15.3 225