eldo_user

Simulator Compatibility
Spectre to Eldo Converter
• A2D
The analog-to-logic converter transfers analog waveforms to a logic simulator.
• D2A
The logic-to-analog converter converts a binary signal from a logic simulator to an
analog waveform.
• Verilog-A instances
• Current probe (iprobe)
• Independent resistive source (port)
Limitations
• The following features cannot be converted with the tool. They require some manual
modifications.
o
o
o
o
o
Related Topics
Nested sweeps that sweeps more than one paramset. For example:
sweep1 sweep paramset=paramset1 {
sweep2 sweep paramset=paramset2 {
}
}
....
Complicated combinations of the alter set statements.
In the PWL definition, a maximum of 500,000 pairs are accepted. If this number is
exceeded, the conversion will fail.
Long lines, it is advisable that any line should not be longer than 2,000 characters,
usage of line continuation is strongly advised in the original netlist.
Immediate set options and deferred set options are partially covered.
Spectre to Eldo Converter
spect2el Command Reference
196
Eldo® User's Manual, 15.3