eldo_user

Simulator Compatibility
Options in Compat Mode
This option is automatically set in compat mode. It specifies that all the libraries (.LIB)
should be included without filtering the objects (model, card or subcircuit) that are not
used in the specific netlist.
• LICN
This option is automatically set in compat mode. Causes the last initial condition (.IC)
specification to have precedence over previous IC specifications.
• MODWLDOT
This option is automatically set in compat mode. It is used for binned models.
• NOELDOLOGIC
This option is automatically set in compat mode.
• NOELDOSWITCH
When specified in compat mode, it informs Eldo that devices beginning with an S are
not switches (Eldo default) but S-parameter block instantiations.
• NOINIT
Set for cases where UIC is set on the .TRAN card.
• OPSELDO_DETAIL
If this option is not set, Eldo enables a variation of SILENT mode. Nothing is written in
the .wdb and .aex files, but the last run is saved in the .chi file.
• PARHIER=local|global
Default is set to global. Global “parent” values have precedence. Example:
.SUBCKT R1 1 2
R1 1 2 a
.ends
X1 in out R1 a=2
.param a=3
When parhier is local, X1.R1 will be 2, while when parhier is global, X1.R1 is 3. See the
“PARHIER” option in the Eldo Reference Manual.
• PROBE
.PROBE command is emulated, that is, all node voltages are dumped in the binary
output file (.wdb). To dump only those items specified in .PLOT/.PROBE in the output
file, add .OPTION PROBE.
• QUOTREL
This option is automatically set in compat mode.
• SLASHCONT
Eldo® User's Manual, 15.3 173